This commit adds TLS support to socket echo_client/echo_server samples.
Credentials used are the same as in the non-socket versions of these
samples, therefore they can be easily tested with net-tools utils.
Maximum payload size for the client was sligtly reduced to fit the
encrypted data within 1280 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add CA certificates to http_get and big_http_download samples. Use
socket options to configure TLS connection - TLS certificates are now
validated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Mesh specification doesn't support more than 32 transport layer
segments, the way the number was so far derived from the advertising
buffer count could result in a highre numbe than 32, thereby wasting
memory. Make the number of supported segments build-time configurable
through a new BT_MESH_TX_SEG_MAX configuration option.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not enter Low Power states once the test execution is done. This
is needed to avoid the flashing issues which were seen when system
is in deep sleep states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The logic for error checking after net_pkt_pull was inverted -
build_pkt_reply would exit in case net_pkt_pull succeeded. In result no
responses were sent by echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If -fno-strict-overflow compiler flag is disabled, then this warning
is printed:
samples/net/throughput_server/src/server.c:157:6: \
error: assuming signed overflow does not occur when assuming \
that (X + c) >= X is always true [-Werror=strict-overflow]
if (new_print > curr) {
Fixes#8924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If echo-server receives a IPv6 packet with large header (e.g HBHO)
build_reply_pkt() function failed to remove IPv6 header. Reason is
net_buf_pull() doesn't work if header length is more than one
fragment. net_pkt_pull() solves the issue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This force CONFIG_BT_DEVICE_NAME_MAX to be set even in boards where
CONFIG_BT_SETTINGS won't be defined so it exercise such configuration.
In addition to that set a long name that would not fix in the
ScanData.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixing copy paste error, where ipv4 member of
the structure is used in ipv6 branch.
CID: 187074
Fixes Issue #8992
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Enabling internal processing thread allows implicit initialization
and processing log messages in case mutlithreading is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With the change to the configuration files, we can now compile
this sample for any platform that uses only the default prj.conf file:
nrf52840_pca10056
nrf52840_pca10059
usb_kw24d512
Update the sample.yaml file to remove the excludes.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename README to README.rst and add:
- Some nice formatting for existing content
- Requirements section (including handy links)
- Build and Running section (including multiple overlay options)
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for NXP MCR20A 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=usb_kw24d512 \
-DOVERLAY_CONFIG=overlay-mcr20a.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for TI CC1200 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc1200.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
When the CC2520-specific configs are removed from the prj.conf
file, the sample can be built for hardware that supports
802.15.4 natively w/o any changes to the prj.conf like so:
cmake -DBOARD=nrf52840_pca10056 ..
cmake -DBOARD=usb_kw24d512 ..
The CC2520-specific settings now live in overlay-cc2520.conf
which can be used like so when building for devices that can
use it:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc2520.conf ..
Later, support for other optional HW like CC1200 and MCR20A
can be added in a similar way.
Signed-off-by: Michael Scott <mike@foundries.io>
ESP32 does not like newlib, exclude for now to get a clean sanitycheck
run. We have issues about this already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Documenting new logger features: waking up processing thread
and internal logger processing thread.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When enabled, logger is creating own thread which processes buffered
logs. When no logs to process, thread sleeps for configurable period.
Thread can be waken up if number of buffered log messages exceeds
configured threshold. Logging sample aligned to use new feature.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed redundant and unused config options from conf files.
Added separate files for handing power management and device
handling functions.
Added the PM policy based on the next timeout event instead of
simply advancing to the next power state.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Log API can be used before user can explicitly initialize the logger.
In order to ensure that logger core is ready to buffer log messages
it must be initialize as early as possible. Initialization does not
include initialization of default backend since driver may not be
ready and backend is needed only when log messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add config file that enables to run http_get and big_http_download
samples with TLS enabled and receive the data through HTTPS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If temperature value are out of range which is from 0x0320
to 0x4E20 then no relevant get message handler will execute.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added extra case under state binding's switch statement for
Lightness i.e DELTA_LEVEL. Also upgrade binding between
1. root element's LEVEL state & Light Lightness Actual state.
2. Light Lightness Linear state & Light Lightness Actual state.
3. Light CTL lightness state & Light Lightness Actual state
This is as per Bluetooth Mesh Model Specification 3.3.2.2.3.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now on reboot, NODE as client do not start message publishing
with TID = 1. Instead of that it would start with any random value
from 0 to 255.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Improved code readability by declaring some pre-processor
definitions in device_composition.c
Remove model_instance variable from some structures define in
device_composition.h & its relevant code.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update Vendor model message handlers & make it to work as per
TID like other Models defined by SIG. Removed union based data
extraction mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Updated state Binding as per PTS test requirements. Now if
gen_onoff_server & gen_onpowerup_server received Prohibited values
then they will not react on it further. Plus make necessary changes
wherever required for message handlers as per Mesh Model
Specification which is mostly regarding to default & range values.
Now right Status code would get publish in response to set lightness
& temperature range. Also upgrade Message handler
gen_delta_set_unack() algorithm as per PTS requirements.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This simple application periodically prints the ambient temperature.
Optional support for threshold triggers is provided.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
