We will implement this as a core feature using tracing points and make
it available to any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With the recent changes to identity address handling the local
identity address is only guaranteed to be available once
settings_load() has been called. Move the initialization of dev_uuid
to the appropriate place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a sample application to show the LP5562 driver. The three RGB
channels are used to set multiple colors after each other under the
assumption that accordingly colored LEDs are connected. Blinking is also
shown in multiple colors.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added transition time support. Now if NODE received optional
parameters then they would get entertained by it.
Added two new models that is Generic Default Transition Time
Server & Client resp. to complete overall architecture to
support newly introduced architecture.
With this it was possible to implement
gen_move_set/gen_move_set_unack message handlers.
Removed redundancy from App & revised overall implementation.
Fixed Bugs. Upgraded coding style. Added & replaced comments to
improve code readability. Improved printk messages.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added time stamp based message filtering as per Bluetooth Mesh
Developer study guide for each Server. Now even if message
source address & TID is same even after 6 seconds then
that will get proceed otherwise will get ignored.
Coding style improvements.
If particular Server model receive Prohibited values as per
Mesh Model Specification then that message will not get entertained.
Now proper status code will get send if user upgrade
light_lightness_range_state & light_ctl_temperature_range_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Upgraded state binding algorithm & created separated
file for it. Moved light_default_status_init() from
device_composition.c to main.c. Shorten variables names
defined in struct light_lightness_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Fixing the min max range validation where condtions on
upper and lower bound are logically 'ANDed'. Fixing it
by logical ORing the result.
CID: 18325, 18326
Fixes Issue #9289
Fixes Issue #9290
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add DTLS support to socket echo_client and echo_server samples.
Additionally, move TLS-related configs to overlay-tls.conf config file,
to align with other examples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
On flash NVS was stored one entry after another including the metadata
of each entry. This has the disadvantage that when an incomplete write
is performed (e.g. due to power failure) the complete sector had to be
rewritten to get a completely functional system.
The present rewrite changed the storage in flash of the data. For each
sector the data is now written as follows: the data itself at the
beginning of the sector (one after the other), the metadata (id, length,
data offset in the sector, and a crc of the metadata) is written from
the end of the sector. The metadata is of fixed size (8 byte) and for
a sector that is completely occupied a metadata entry of all zeros is
used.
Writing data to flash always is done by:
1. Writing the data,
2. Writing the metadata.
If an incomplete write is done NVS will ignore this incomplete write.
At the same time the following improvements were done:
1. NVS now support 65536 sectors of each 65536 byte.
2. The sector size no longer requires to be a power of 2 (but it
still needs to be a multiple of the flash erase page size).
3. NVS now also keeps track of the free space available.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The nvs module has some disadvantages for larger block size. The data
header and slot are taking up to much space. A rewrite is proposed that
reduces the used storage space for systems with write block size > 4.
The data storage in flash is now one unit consisting of: data_length,
data_id, data and data_length again in a multiple of the write block
size. The data_length at the end is used to validate the correctness of
the flash write and also allows to travel backwards in the filesystem.
As a comparison, on a system with block size 8 byte, a 32 bit values
now fits 1 block including the metadata (length and id). This used to
be 3 blocks.
The data_length will occupy 1 byte if the data length is less than 128
byte, it will occupy 2 byte if the data length is 128 byte or more. The
data length is limited to 16383 byte.
Each write to flash is verified by a read back of the data.
The read performance is improved because reading is done backwards so
the latest items are found first.
When the filesystem is locked it can be unlocked by calling
reinit(), this will clear flash and setup everything for storage.
add sample documentation - README.rst
Update dtsi to include erase_block_size, use erase_block_size in sample
Update prj.conf to include CONFIG_MPU_ALLOW_FLASH_WRITE
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This will make adding properties to symbols in the base Zephyr Kconfig
files work the same as before.
I didn't actually spot any such cases, so this is just to play it safe.
It also makes the sample Kconfig symbols appear at the top in the
menuconfig interface, which might be nice.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer required. Kconfiglib expands references to
environment variables directly.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CMake has several prototypes/signatures for the function
'target_link_libraries'. This commit migrates the usage of
'target_link_libraries' on Zephyr CMake libraries from the old 'plain'
signature to the new '<PRIVATE|PUBLIC|INTERFACE>' signature.
For technical reasons the two signatures can not be mixed. Each
library must exclusively use either the old or new signature.
The 'old' plain signature is equivalent to using the PUBLIC
signature. Migrating to use 'PUBLIC' is therefore expected to be a
safe change.
After the migration it will be possible to use the PRIVATE and
INTERFACE signatures on Zephyr CMake libraries. This is useful for
instance to fix issue 8438.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The old GCC ARM Embedded website on launchpad
(https://launchpad.net/gcc-arm-embedded) has been superseeded by the new
GNU Arm Embedded one
(https://developer.arm.com/open-source/gnu-toolchain/gnu-rm).
This also means a change of name from "GCC" to "GNU". Reflect this in
the enviroment variables so that the proper term is used henceforth.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some reST syntax errors and doc edits got missed during the review
of PR #561 causing problems in the generated HTML.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch aligns documentation to changes in imagetool.py released
in mcuboot 1.2 (latest release).
Also adds note about workaround for possible timeout while erasing
image-slot on some devices (like nRF52840 SoC)
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The application does nothing useful, it just enables Link Layer
Discovery Protocol support which starts to send LLDP network packets
to ethernet network interface. Note that the LLDP packets are only
sent to those network interfaces that claim to support LLDP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Remove NET_LOG / NET_BUF_LOG settings, instead just enable SYS_LOG
- Simplify by also removing SYS_LOG_SHOW_COLOR, INIT_STACKS and
NET_STATISTICS. These can be enabled by user if wanted/needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Allow user to configure a program that is executed after the
network interface is created and IP address is setup.
This can be used e.g., to start wireshark to capture
the network traffic of the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Default value 2 was not enough for mcast addresses table.
Core stack adding mcast addresses on various reasons. Also
coaps_client trying to create mcast context for some purpose.
mcast address is not in lookup table, so binding fails. Add
CoAP sample related mcast address to table and then bind the
context.
Fixes#9131
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Let's add an overlay file to enable using the WNC-M14A2A LTE-M
modem with the LwM2M client.
Also, update documentation for it's use.
Signed-off-by: Michael Scott <mike@foundries.io>
Adding IPv4 autoconf sample application that can be used to
test IPv4 autoconf functionality.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This app will not fit in the 96b_nitrogen board with ECC enabled.
"real-ld: region `SRAM' overflowed by 68 bytes". Disable the feature
explicitly since a subsequent patch will auto-enable it for all
combined Bluetooth Host-Controller builds.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Thread registers multiple unicast and multicast adresses by default. As
they are exchanged with Zephyr interface, we need enough buffers to
store them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
