The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
It was possible to freeze the application by pressing the user button
too frequently. This was likely due to the stack not keeping up with
the send requests and running out of buffers.
Add rate-limiting to the app, so that at most one message per 500ms
can be sent. Also add a user message if the user presses the button
too many times in rapid succession, and inform the other badges of
this misbehaving user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using new net_pkt r/w API and so on.
This sample would still need to be using socket API instead.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Configure lvgl defaults for imx rt boards in their respective board
defconfigs rather than the lvgl sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The CANBUS sockets require "struct can_frame" to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CANBUS sockets require can_filter to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added a warning that will abort build without disks.
Added a default configuration for nrf52840_pca10056.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This patch checks the return values of setsockopt.
Fixes: #14392, #14402
Coverity-CID: 195897, 195848
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As there is no shell submodules any more, the "zperf" command
needs to be written in every command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Patch (3206568e43) changed network
interface numbering starts from 1. The index 0 is reserved.
So use api to get default interface index for packet socket sample.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commits adds an overlay file with the SOCKS5 symbol that is needed
to run MQTT with a proxy, and extends README with instructions on how to
use it with the default and custom settings.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The VLAN documentation had double wording and proper links to files
in github was missing, which did not look good in the rendered HTML
page.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_IEEE802154_CC2520_AUTO_ACK seems to creep back in, but has long
since be removed. We remove old references a few times.
Commit 2facf33f28 - "net: ieee802154: Remove old cc2520 AUTO_ACK
assignments".
Remove them again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds more error checking and handling for socket APIs.
Fixes: #13885
Coverity-CID: 190928
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
CONFIG_NET_DHCPV6 doesn't exist so remove references to it in the
sample, leave comments about TODO if/when this might exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DCD_DSR does not exist so the code block associated with it would
never be built, so remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need to set CONFIG_HW_STACK_PROTECTION=y, instead of the
internal symbol CONFIG_MPU_STACK_GUARD, in order for fatal.c
to be able to parse the error code. MPU_STACK_GUARD is,
anyway selected if HW_STACK_PROTECTION is set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This example combines 2 HID classes and 2 CDC ACM classes to create
a composite, multi-instance device.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Most of the basic tests trigger LEDs or expect button press and would
hang in device testing because we can't parse success or failure from
the console. Define harness for this with the intent to skip those in
sanitycheck device testing and until we have a better way to test those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some boards' configuration does not enable GPIO by default,
like nrf52_pca10056, it causes ASSERTION FAIL when running
this application. This fix is to enable GPIO by default for
the basic threads sample, like basic blinky sample does.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
We are doing math of two 32-bit numbers and assigning into a 64-bit
result. Add explicit cast of one of the values being multipled to get
explicit promotion.
Fixes: #13883
Coverity CID: 190930
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return from ipm_set_enabled wasn't assigned to 'status' so the check
right after the call to ipm_set_enabled() wasn't doing the right thing.
Fixes: #13881
Coverity CID: 190932
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
