This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
main function is not necessary.
And without main here, it is possible to import these
samples zperf files in another project.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
In this commit, a config.h header file is added to support the case
when the NET_CONFIG_SETTINGS is not used. main.c is also modified to
enable platforms that do not support IPv6. These changes are necessary
in order to allow cc3220sf_launchxl support.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Sample code for AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Sample code for AMS (Austria Micro Systems) Indoor Air Quality Sensor
reading VOC and equivalent CO2 values.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enable the GPIO reset pin feature of nrf52840_pca10090
on pin P1.02 and the wait NOP feature of the controller.
These are used to let nrf9160_pca10090 synchronize the
HCI communication with nrf52840_pca10090 controllers.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The patch provides flash offsets appropriate for running
this sample on nrf9160_pac10090 targets.
As that sample is small one, it is done with assumption that image_1
flash partition is empty.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Write protection was not disabled prior erase call.
It used to work before only because nrf driver had not check
the protection before erase execution. This behavior was changed in
order to align to zephyr - which implied requirement for this test fix.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixed using chipselect with seperate chipselect GPIOs and how they were
referenced from/in DeviceTree.
Also configure the device during initialization so it's ready to go
after init.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Project configuration to run the CAN sample with the MCP2515 attached
via SPI as the CAN controller.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
This commit enable Bluetooth SMP Service which will help
us to do Device Firmware Upgrade over thr air. By default
it is not enable.
Reference: $zephyr/samples/subsys/mgmt/mcumgr/smp_svr
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add config overlay for cdc_acm+dfu composite configuration.
Manual configuration over menuconfig may be error-prone for
the user because then FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
should also to be set to appropriate values.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
In order to fit in SRAM, reduce the CONFIG_BT_MAX_CONN from 20 to 16 in
the configuration used for the BBC micro:bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently coverage is enabled only in platforms which dont have
multiple memory regions. This sample was designed to emulate
different memory regions. This in conjunction with gcov which
might instrument data in different memory regions will not work
as expected. Therefore disabling gcov for this sample.
Fixes: GH-15107
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We have actual tests now under tests/kernel/mem_protect/userspace
and tests/kernel/mem_protect/mem_protect that exercise all the
memory domain APIs. This old test is superfluous.
Fixes: #15178
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
More buffers are need to build for sam_e70_xplained board
to work out of the box. Added board specific conf file.
Fixes#15096
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Patch 8af3df3519 changed logic and did not take into account 2 extra
bytes.
...
Precise data bus error
BFAR Address: 0x766e4900
***** Hardware exception *****
Current thread ID = 0x200004e8
Faulting instruction address = 0xddf4
Fatal fault in thread 0x200004e8! Aborting.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
telnet_console driver is not compatible with new shell module, hence is
not working. Switch the telnet sample to use new TELNET shell backend.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
