Adds a test case listing in sample.yaml of the mesh_provisioner sample,
building on qemu and the Nordic nRF51 DK to ensure that the provisioner
role is built in PRs.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Power management sample for that board has very
confusing name that should be changed to something
more understandable.
Current name sample.board.sample.board.mec15xxevb_assy6853
I suggest to have new name
sample.board.power_management.mec15xxevb_assy6853
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
LORAWAN_ACT_* should be assigned instead of LORAWAN_CLASS_*. Previously
used LORAWAN_CLASS_A has the same integer value as LORAWAN_ACT_OTAA, but
update code with the latter to use the proper type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The overlay file defines an i2c interface for the
Feather nRF52840 Express and the Adafruit BME680.
Also adds the platform to the test build configuration.
Signed-off-by: Patrick K. Moffitt <patrick@moffitt.com>
Add commands to suspend or resume the GSM modem. These commands
might not be enough as at least the SIMCOM 808 modem requires
that the modem is reset when it is resumed, and this application
does not do any reset atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add nucleo_l552ze_q_ns board to the allowed list of platforms
for the tfm_ipc sample. This allows the sample to be built for
the nucleo_l552ze_q_ns platform by sanity check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the name of the sample in the .yaml file so it matches
the sample directory, and does not collide with tfm_ipc.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the samples' documentation we update the requirements
for building TF-M binaries according to the latest upstream
TF-M documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation on how to build and run the TF-M integration
samples on nRF platforms.
The arm-none-eabi-gcc does not need to be on the PATH anymore
for building and running the tfm_ipc sample on nucleo so remove
the note from the sample docs.
Fix some paths for TFM binaries for the LPC board as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adapts the DTS overlay for nucleo_l552ze_q_ns
board, to comply with the changes applied in the flash
layout of the TF-M build.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changes required in TF-M integration samples CMakeLists.txt
files due to the new upstream TF-M build system. In brief,
configuration related to PSA API (IPC), Regression, and
Isolation level needs to be passed, now, directly, not
via invoking a given TF-M CMake configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding support for TF-M in the Nordic nRF9160 DK.
Allow the TF-M integration samples to be built and
executed for nRF9160 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TF-M related information in the relevant board definitions
needs to be updated in the wake of the new TF-M Build
system.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Always run thread_b on CPU 0 by setting cpu_mask if on SMP system.
Run this with CONFIG_SCHED_CPU_MASK=y set on an SMP system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Users testing beacon capability will likely want to see the beacons in
a sniffer tool. Switch to an advertising mode that uses a persistent
known address, and display that address on the console output.
This also demonstrates techniques to retrieve the advertising address
where one is known.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The x_nucleo_iks01a2 shield supports both standard (Mode 1) and
sensorhub (Mode 2) modes through proper dip switch selection.
For more information please refer to:
https://www.st.com/en/ecosystems/x-nucleo-iks01a2.html
This commit moves the original (Mode 1) support under 'standard'
directory and adds the Mode 2 support into 'sensorhub' directory.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This sample application shows how to configure an end node in Class-A
mode and to send data to network server via gateway.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Testing the sample with Zephyr SDK 1.14 (vs 1.13) with qemu_x86
showed that it consistently crashes on 2th-4th iteration. Avoid
bite-sized increase this time, and dump stack considerably to
avoid constant need to update it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After HW stack protection option was globally enabled for
nRF SoCs turned out main stack size is too small for
USB mass storage sample. Increase to avoid overflow.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
It's copy of openthread conf from samples/net/sockets/echo_client,
but requires increasing of main stack size to avoid crash.
Also fixes building if CONFIG_LWM2M_DTLS_SUPPORT is enabled #28787.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Provide device tree flash partition in order to configure
and flash non secure binary.
Flash partitioning depends on TFM configuration and use case,
so it is provided as an overlay in the sample it is used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove Adafruit/Seeed TFT hardcoded settings. Note that undocumented
ILI9340/1 settings have been removed (maybe Seeed is using another ILI
variant?).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
The up_squared board suffers the same issue as qemu_x86_64
where a bigger stack is needed but CMSIS has a limit on
how big the stack can be. This results in stack overflow.
So exclude up_squared in samples.yaml.
Fixes#28552
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
fixes following cmake warning:
CMake Warning at ../../kernel/CMakeLists.txt:54 (message):
Single threaded mode (CONFIG_MULTITHREADING=n) is deprecated
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
Deprecate the Kconfig option for the time being. Unless a contributor
volunteers to take over the work to maintain the option, it will be
removed after 2 releases.
Relates to #27415.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
From 2.3 to 2.4 the net samples pair echo-server/client increase the
SRAM requirements. Since CI doesn't build all combinations, (even for
a release like 2.4.0-rc1) the problem was detected only now. Decrease
buffers for atsamr21_xpro on both echo_server/client sample pair.
Fixes#28341.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In some cases we were returning empty thread names, so make sure we
check for the thread names correctly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead if printing the line number, output the context (thread,
semaphore, mutex, ..) and the ID of the event where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the option to disable kernel memory pool when
multithreading is also not enabled. This saves some
code space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ESPI is supported in MEC15 chips but similar to PECI, I2C, eSPI bus
testing requires another device to act as eSPI host.
While this sample can be run in EVB the HW connection to a eSPI host
(Intel RVP) is not documented/supported.
Mark as not supported in that HW only in Modular card
(which setup is documented)
Also remove duplicate definition of the "depends_on: espi"
in the end of the sample.yaml file
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
