Add a closing comment to the endif with the configuration
information to which the endif belongs too.
To make the code more clearer if the configs need adaptions.
Signed-off-by: Simon Hein <Shein@baumer.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This header does not expose any public APIs, so move it under
kernel/include and change files including it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_queue_append and k_queue_alloc_append are in a race
condition.
Scenario:
Using either of the above mentioned functions from a
preemptive context, can lead to the element being
appended to the queue to be lost. The element loss happens
when the k_queue_append is interrupted at a critical point,
when the list only contains one element and k_queue_get is
called, before the k_queue_append is allowed to complete.
Fix:
Move sys_sflist_peek_tail inside queue_insert(). Add additional
bool paramenter to queue_insert(), to indicate append/prepend
operation.
Fixes#29257
Signed-off-by: iva kik <megatheriumiva@gmail.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The k_queue data structure, when CONFIG_POLL was enabled, would
inexplicably use k_poll() as its blocking mechanism instead of the
original wait_q/pend() code. This was actually racy, see commit
b173e4353f. The code was structured as a condition variable: using
a spinlock around the queue data before deciding to block. But unlike
pend_current_thread(), k_poll() cannot atomically release a lock.
A workaround had been in place for this, and then accidentally
reverted (both by me!) because the code looked "wrong".
This is just fragile, there's no reason to have two implementations of
k_queue_get(). Remove.
Note that this also removes a test case in the work_queue test where
(when CONFIG_POLL was enabled, but not otherwise) it was checking for
the ability to immediately cancel a delayed work item that was
submitted with a timeout of K_NO_WAIT (i.e. "queue it immediately").
This DOES NOT work with the origina/non-poll queue backend, and has
never been a documented behavior of k_delayed_work_submit_to_queue()
under any circumstances. I don't know why we were testing this.
Fixes#25904
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Calling z_ready_thread() means the thread is now ready and can wake up
at any moment on another CPU. But we weren't finished setting the
return value! So the other side could wake up with a spurious "error"
condition if it ran too soon. Note that on systems with a working
IPI, that wakeup can happen much faster than you might think.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/sflist.h to sys/sflist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Given that the section name and boundary simbols can be inferred from
the struct object name, it makes sense to create an iterator that
abstracts away the access details and reduce the possibility for
mistakes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Straightforward port. Each struct k_queue object gets a spinlock to
control obvious data ownership.
Note that this port actually discovered a preexisting bug: the -ENOMEM
case in queue_insert() was failing to release the lock. But because
the tests that hit that path didn't rely on other threads being
scheduled, they ran to successful completion even with interrupts
disabled. The spinlock API detects that as a recursive lock when
asserts are enabled.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were using z_thread_malloc() without including
kernel_internal.h. On existing architectures that works due to
transitive includes, but x86_64 has a thinner include layer and
doesn't do it for us. Include the files required for the APIs we use.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
MISRA-C requires the right-hand operand of && or || operator does not
contain persistent effect.
MISRA-C rule 13.5
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch fixes few issues in queue.c. This patch also changes
the return type of k_queue_alloc_append and k_queue_alloc_prepend
from int to s32_t.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Make while statement using pointers explicitly check whether
the value is NULL or not.
The C standard does not say that the null pointer is the same
as the pointer to memory address 0 and because of this is a good
practice always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make if statement using pointers explicitly check whether the value is
NULL or not.
The C standard does not say that the null pointer is the same as the
pointer to memory address 0 and because of this is a good practice
always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Previously (as introduced in 48fadfe62), if k_poll() waited on a
queue (or subclass like fifo), and wait was cancelled on queue's
side using k_queue_cancel_wait(), k_poll returned -EINTR. But it
did not set event->state field (to anything else but
K_POLL_STATE_NOT_READY), so in case of waiting on multiple queues,
it was not possible to differentiate which of them was cancelled.
This in particular broke detection of network socket EOF conditions
in POSIX poll() implementation.
This situation is now resolved with introduction of explicit
K_POLL_STATE_CANCELLED state, which is now set for cancelled queue
(-EINTR return remains the same).
This change also elaborates docstring for the functions mentioned, to
document this behavior.
Fixes: #9032
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
queue_insert will always return 0 when no memory is allocated, just
explicitly marking that we are ignoring return value in these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Uncovered by clang we have some functions being only used conditionally,
so gaurd them to make them only available when those conditions are met.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The queue loop when CONFIG_POLL is in used has an inherent race
between the return of k_poll() and the inspection of the list where no
lock can be held. Other contending readers of the same queue can
sneak in and steal the item out of the list before the current thread
gets to the sys_sflist_get() call, and the current loop will (if it
has a timeout) spuriously return NULL before the timeout expires.
It's not even a hard race to exercise. Consider three threads at
different priorities: High (which can be an ISR too), Mid, and Low:
1. Mid and Low both enter k_queue_get() and sleep inside k_poll() on
an empty queue.
2. High comes along and calls k_queue_insert(). The queue code then
wakes up Mid, and reschedules, but because High is still running Mid
doesn't get to run yet.
3. High inserts a SECOND item. The queue then unpends the next thread
in the list (Low), and readies it to run. But as before, it won't
be scheduled yet.
4. Now High sleeps (or if it's an interrupt, exits), and Mid gets to
run. It dequeues and returns the item it was delivered normally.
5. But Mid is still running! So it re-enters the loop it's sitting in
and calls k_queue_get() again, which sees and returns the second
item in the queue synchronously. Then it calls it a third time and
goes to sleep because the queue is empty.
6. Finally, Low wakes up to find an empty queue, and returns NULL
despite the fact that the timeout hadn't expired.
The fix is simple enough: check the timeout expiration inside the loop
so we don't return early.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There were multiple spots where code was using the _wait_q_t
abstraction as a synonym for a dlist and doing direct list management
on them with the dlist APIs. Refactor _wait_q_t into a proper opaque
struct (not a typedef for sys_dlist_t) and write a simple wrapper API
for the existing usages. Now replacement of wait_q with a different
data structure is much cleaner.
Note that there were some SYS_DLIST_FOR_EACH_SAFE loops in mailbox.c
that got replaced by the normal/non-safe macro. While these loops do
mutate the list in the code body, they always do an early return in
those circumstances instead of returning into the macro'd for() loop,
so the _SAFE usage was needless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User mode may now use queue objects. Instead of embedding the kernel's
linked list information directly in the data item, a container struct
is allocated from the caller's resource pool which is then added to
the queue. The new sflist type is now used to store a flag indicating
whether a data item needs to be freed when removed from the queue.
FIFO/LIFOs are derived from k_queues and have had allocator functions
added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Almost everywhere this was called, it was immediately followed by
_abort_thread_timeout(), for obvious reasons. The only exceptions
were in timeout and k_timer expiration (unifying these two would be
another good cleanup), which are peripheral parts of the scheduler and
can plausibly use a more "internal" API.
So make the common case the default, and expose the old behavior as
_unpend_thread_no_timeout(). (Along with identical changes for
_unpend_first_thread) Saves code bytes and simplifies scheduler
surface area for future synchronization work.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that other work has eliminated the two cases where we had to do a
reschedule "but yield even if we are cooperative", we can squash both
down to a single _reschedule() function which does almost exactly what
legacy _Swap() did, but wrapped as a proper scheduler API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Recent changes have eliminated most use of _Swap() in favor of higher
level scheduler abstractions. We can remove the header too.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Everywhere the current thread is pended, the code is going to have to
do a _Swap() soon afterward, yet the scheduler API exposed these as
separate steps. Unify this pattern everywhere it appears, which saves
some code bytes and gets _Swap() out of the general scheduler API at
zero cost.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was the only spot where the scheduler-internal
_peek_first_pending_thread() API was used. Given that this kind of
thing is inherently racy (it may not be pending as long as you expect
if a timeout expires, etc...), it would be nice to retire it.
And as it happens all the queue code was using it for was to detect
the case of a non-empty wait_q over which it was looping, which is
trivial to do without API support.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
_Swap() is defined in nano_internal.h. Everything calls _Swap().
Pretty much nothing that called _Swap() included nano_internal.h,
expecting it to be picked up automatically through other headers (as
it happened, from the kernel arch-specific include file). A new
_Swap() is going to need some other symbols in the inline definition,
so I needed to break that cycle. Now nothing sees _Swap() defined
anymore. Put nano_internal.h everywhere it's needed.
Our kernel includes remain a big awful yucky mess. This makes things
more correct but no less ugly. Needs cleanup.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
