Such helper is useful to generate a complete bit mask from a given
number. For instance BIT_MASK(2) will output 0x03, or BIT_MASK(8) will
output 0xFF
Change-Id: I406de767d839b7b2d37024b7b41679edddabe551
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch adds a comment to DEV_* codes definition to inform that these
codes are deprecated and we should use codes from errno.h instead.
Change-Id: Ia01b83035db5526b2da56ad4a06b2ebab85b0d55
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add enum value for full-scale attribute, so we can implement runtime
alteration if needed.
Change-Id: Ib71b4cac6e8841e3f082c07ee75939d1c51209b4
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
The header sys_log.h concentrates logging macro definitions so it can be
reused by all code, change aims create an API to replace replace
currently duplicated logging macro definitions. Later enhancements to
log can now be performed in a single file. Features:
* Optional printing of colored messages
* Incremental log levels per-module
* Optional printing of logging level label (info, error, warning, debug)
* Caller function name printing
* One point log disable
* Global override log level
* Print function detection (printf or printk)
JIRA item ZEP-111 refers to this change.
Origin: Original
Change-Id: I34492b0148b4e9d0094f69c511b96f4fd640ef44
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The helper for analyzing (fiber) stack usage is in no way specific to
Bluetooth and will likely be of use to many other places as well. Move
it therefore to include/misc.
Change-Id: Iedb699dbe248aca305e387998d37bb339cfb0e21
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The slope threshold and duration attributes can be used to
configure the any-motion (slope) interrupt for sensors that
support it.
Change-Id: Ib09ef276cfd3dda5c94bce13bcf4c6c5436c1e4c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add the public API for counter devices and the drivers infrastructure.
Origin: Original
Change-Id: If100fbc9b3d119ce2be6c131bd64dbeb4fe346f2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add enum values that are common for magnetometer sensors (vectorial
components).
Also add oversampling factor attribute.
Change-Id: Ic193c1ad14af301047e652ac63b4480c1b1154bc
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This patch fixes the remaining APIs documentation which have reference
to DEV_* codes.
Change-Id: I26dd971a4b5e492ce026892f6262b84f7bde6296
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch redefines DEV_* error codes in terms of errno.h codes.
Change-Id: Iab994c40265c294296491d427f65c38abd48b795
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
All driver APIs (i2c, spi, gpio, etc.) return 'int' type, but pinmux
APIs. So this patch changes the returning type from 'uint32_t' to
'int' from include/pinmux.h and fixes all pinmux drivers according.
Besides keeping consistency between all drivers APIs, this patch is
also applicable for the errno.h code transition. Pinmux drivers will
return negative errno.h codes so returning 'int' is more suitable
than 'uint32_t'.
Change-Id: I2a6e92d567a0e21fec363226da6197df94657d4b
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The patch adds a driver for STM32F10x series RCC (Reset and Clock
Control) subsystem.
The module is primarily responsible for setting up of MCU's clock
tree. In particular the driver sets up SYSCLK, PLL (with source
configuration), AHB prescaler, and APB1/APB2 prescalers. As part of this
functionality, the subsystem can enable/disable clock signal for
particular peripherals, thus reducing the power consumption of the MCU.
The driver implements clock control driver API. However, subsystem IDs
being HW specific are exposed in driver public header that must be
included by callers. The driver registers a single device using a common
name STM32_CLOCK_CONTROL_NAME. The device is initialized at
the PRIMARY level with priority 1. This allows the initialization to
take place right after SoC initialization routine.
The driver depends on selection of SOC_STM32F1X config option and is MCU
specific.
Change-Id: I8bea5db20726a24bce7b7ffe0b95de543240429a
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Extend the public API of clock_control driver with a function for
querying of clock rate driving given peripheral. This is useful when the
driver must calculate or configurae values that depend on the rate of
clock driving this subsystem.
A baud rate setting of UART port is an example of such operation. To
configure a particular baud rate the driver may need to set the internal
counters of UART port, where the actual value will depend on the clock
rate for this peripheral.
The implementation returns DEV_NO_SUPPORT for clock_control drivers that
do not implement such functionality.
Change-Id: I4e7ec96cd3678a4bb1ff289b0247488289310f2d
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
When using the CSMA MAC driver, a new packet can be queued before
all the fragments of the previous one were sent. The transmit_packet_list()
function will start sending the old fragments with the new net_buf context.
Keep a per-context neighbor_list to avoid that
Change-Id: I9d41a923c48f597cc95a8f8c9f67884c5caac02c
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Sensor drivers expose one or more channels, corresponding to each
individual quantity they can measure. Such quantities may be different
altogether (e.g. temperature and pressure) or different axes for the
same unit (e.g. three axes of acceleration). Before reading channels, a
driver must be explicitly instructed to obtain a sample from the device.
This helps accommodate sensors which can only read all channels at once,
and also helps ensure coherence of measurements and optimize I2C/SPI
traffic.
Channels can be read as floating point values or struct sensor_value.
The latter consists of a pair of integers and a type field which
dictates how to interpret said integers. The most common type is INT
(where the second value is ignored) or INT_PLUS_MICRO, which means the
second value should be multiplied by 1.0e-6 and added to the first.
A sensor driver may support one or more triggers, corresponding to
interrupts or timers. Registering for a trigger involves supplying the
driver with a callback which is called when a condition is reached.
Examples of trigger types are: data ready, timer expiration, any-motion,
near/far.
Finally, sensors support attributes such as sample frequency,
measurement accuracy or threshold values for triggers. However, runtime
configuration is discouraged, in the interest of keeping code simple.
Origin: Original
Change-Id: Id290fe544b6f7eccc4b109f3912fca1692e55623
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When user creates a socket using net_context_get(), the function
requires local endpoint IP address. This should not be a NULL
pointer because the storage for that IP address was statically
allocated inside the function. Because of this the user needs
to allocate the storage for this and pass that local IP address
to the function. The net_context_get() will fill that local
address to sane value if user passes ANY address (== all bytes
are zeroes) to it.
Change-Id: I88314957f07912d9ecbe517a2402822401d81bd9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nmi_on_reset.S functions are used by all ARM platforms. It
makes no sense to repeat the same code for all platforms. Moving
the code from each SOC implementation to arch/arm/core.
The same treatment for the NMI_INIT() macro. Moving it from a per
SOC implementation to the include/arch/arm/cortex_m/nmi.h.
Change-Id: I574d8880a44046cc7b9e1b635e80d6e83657b8c1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Now that the internal libc has the off_t type it's the natural choice
for the offset parameters in the flash API.
Change-Id: I69999999625b46634f6d3008fe1b3f82c17d357c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the ordering consistent e.g. with SPI, Bluetooth and
Networking APIs. This also follows the order of parameters in the
POSIX read/write APIs.
Change-Id: I4f11c8c90ccadf176d79f6a7bbd98aac61c26cf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
size_t is the natural type for any integer that describes a number of
bytes. For the actual data use void pointers to avoid callers having
to do explicit typecasts if the data doesn't originate in a uint8_t
array. Also use a const pointer for writing to avoid typecasts for
data that originates in a const location.
Change-Id: Idbfc14b2d61ca6189411b211c3727f857dbd4059
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Support for Freescale/NXP K64 SPI modules, limited to:
- Master mode
- A single active set of clock and transfer attributes (CTAR0), which
includes non-adjustable delay parameters
- Tx FIFO fill and Rx FIFO drain interrupt handling
- Standard, continuous select and continuous SCK SPI transfer formats
Also, divide-by-zero code generation in this driver is prevented.
The 'volatile' attribute is added to some of the variables in the baud
rate and delay calculation functions of the K64 SPI driver in order to
prevent bad code generation by gcc toolchains for ARM seen when an
optimization setting above -O0 is used.
Specifically, a register is loaded with the constant 0 and is used as
the divisor in a following divide instruction, resulting in a
divide-by-zero exception.
This issue has been seen with gcc versions 4.8.1 (the VxWorks toolchain)
and 5.2.0 (the Zephyr SDK toolchain).
Change-Id: Ib5b2b748aad8fdfd5e8d40544e6e1abef3713abe
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Phase describes number of clock ticks of delay before the start of the
pulse.
Change-Id: I8e2f5fde423edff09cd5a4a298d911cb7d3cc126
Work-by: Mike Hirst <michael.hirst@windriver.com>
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Reorganizes mostly by using preprocessor (indirectly Kconfig options)
strictly LE-SMP related interfaces and security interfaces shared
between LE and BREDR connections.
Change-Id: I90daa36d72403cd5b73e6791714fcaf7f1fbe8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The pinmux API was modified to expand the meaning of the 'func' argument
to allow it to represent more than a pre-configured function. This was done
to reasonably accommodate a larger range of pin configuration options
offered by other MCUs, such as the Freescale K64 (up to 8 pin functions,
plus interrupt, pullup/down, drive strength, open-drain, slew rate, etc.).
This allows bit fields to be used to define various settings.
Change-Id: I2b216b822c6bae7133eed01c8c3339bb47b6c5db
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
ipm_send_t properly had 'const void *' for the data payload, but
not the ipm_send() API.
Change-Id: I62a424d37bc17f5bc3646c71d3ff3b029f52cbcc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
