Used for operating on all elements of a doubly-linked list.
Change-Id: I9eae26ef6d24ce497dbb3acc8a699598d1547bde
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Commit 3e63a74514 did not revert properly
things.
Change-Id: I792d5698966542ce2cfb9f858c56b30c392f02a2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If net_send() is success, do not unref the buffer. Free the buf
when it returns error.
Change-Id: Ic154879dfb583d52a0b12fd3e8bfc390a24efec9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DEFINE_DEVICE_PM macro was not defining device_pm_ops
as 'static'. Fixes the issue and impacted areas.
Jira: ZEP-639
Change-Id: I5e1de6af97bf7b2b690af0c81034ce167e655e43
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These impede debugging and we have CONFIG_OMIT_FRAME_POINTER
now which does this globally for the entire kernel.
Change-Id: I46939223e27dd298ca3ed162ff5790cb2e9ed2a2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sys_put_le64 stores a 64-bit unsigned integer into an
arbitrary memory location and is alignment-safe for any
architecture.
Change-Id: Ifd9871a509b9cab05a59d81f4917c68dda3cc824
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
You can't query the LOAPIC for every kind of interrupt that fires,
it has no idea about IRQs that were generated by an 'int' instruction
for example. Extend the semantics of _irq_controller_isr_vector_get()
to return -1 if the vector can't be identified.
Issue: ZEP-602
Change-Id: I1174aa62fbedffdcd329d60da8ef14fabb042dc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The i2c_burst_read function transfers two messages to the I2C device.
The first message writes the internal address of the device, the second
message then reads bytes. A repeated start (restart) is needed to change
the direction from write to read, but the restart flag should be set in
the second message rather than the first.
Change-Id: I7d48de2f4866e3b514f689f41ce5d28eba90c39f
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Data sent by user will be queued in a FIFO. A TX fiber will be
started for each DLC which process this FIFO and write to L2CAP.
Fiber will sleep in two scenarios - no buffer in FIFO, no TX
credit. Credit is handled using semaphore. So if credit is 0
then fiber will wait on semaphore and will be scheduled when
it receives credit.
Change-Id: Id6e796eed594b28d6fb6e4259d3ed52634db9335
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds helper support for handling 32bit UUIDs
Change-Id: I4874b5f092bdbe30039b8031485bf856e4268f2a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
To fully support BT Spec. v4.2 LE Topology use LE read supported
states HCI command to find the supported states in the
controller.
Change-id: I6b4cf4cbefdff44e51bb0a4242e0aef3755f43db
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This adds UUIDs related to HID Service as defined in the assigned
numbers.
Change-Id: I73e8659546587aa9330bcd7d483bc097448e5ced
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Profiles can use this helper to create buffer which reserves the
headroom for rfcomm, l2cap and acl headers
Change-Id: I22f97b54423d66fe0c133a8e9903b652fb6a6854
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for the unification of the code in:
drivers/bluetooth/controller/hci
with the existing HCI definitions in Zephyr,
this change addresses both the required usage of spaces
in the alignment of line components that require matching
the alignment of other adjacent lines and also adds all
missing Bluetooth 4.2 LE commands and events so that the
controller code can make use of them.
Jira: ZEP-726
Change-Id: Iabcee6898a09ddaf4479cfe4ecb0eedc194da8a3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The lmp_*_capable() macros were neither following the appropriate name
space (BT_*) nor the appropriate style (macros should be upper-case).
Introduce a new BT_FEAT_TEST() macro which gives a clearer mapping to
the feature tables found in the core specification. Each specific
feature test macro is now also named with the appropriate BT_FEAT_*
prefix.
Change-Id: Ia6b18b066927908f9bda646e737e63d46a1d17df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make is possible to use lmp_ext_feat_capable() both for local as well
as remote features.
Change-Id: I05bb6a25303c0dd2f5e0bbc4f7f412210f668aa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Read Local Extended Features command to read local features and
extended local features on init.
Change-Id: I4c8594783895f439af36214881aeff24e116e783
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds functionality to do connect to remote PSM. Connecting to remote
PSM other than SDP when both support SSP involves raising security
to at least BT_SECURITY_MEDIUM before any CoC traffic on L2CAP layer.
If connection response is send back with status 'pending' it means
remote doing additional job, so restarts RTX timer. If the command
timer is fired detach the apps channel from connection and make it
ready for reuse.
Change-Id: I81f57bc2f5738754f872ce52cb25027db6db5ccf
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Sends the data to l2cap after adding rfcomm header. Profile should
reserve the head room for rfcomm, l2cap and hci headers. Data length
should not be more than dlc mtu.
Flow control is not included in this patch
< ACL Data TX: Handle 256 flags 0x00 dlen 38
Channel: 64 len 34 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x09 cr 0 dlci 0x02
Control: 0xef poll/final 0
Length: 30
FCS: 0x40
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40
Change-Id: Ib97dbf85e236a5f75fda6037bb75bc6be00b9dc7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PN (Parameter negotiation) is used to negotiate parameters like mtu.
Initial credit for flow control is also sent in PN. If the dlci to which
PN requested is not found in the dlc list then it will be treated as
incoming dlc request and accept callback will be called to profile.
Dlc mtu has to be set by profile (before it returns dlc) which will be
negotiated with remote. But the final mtu will be min of mtu provided
by profile, mtu sent by remote, and session mtu
> ACL Data RX: Handle 256 flags 0x02 dlen 18 [hci0] 210.108444
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: DLC Parameter Negotiation CMD (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 15 pri 7
ack_timer 0 frame_size 122 max_retrans 0 credits 7
< ACL Data TX: Handle 256 flags 0x00 dlen 18 [hci0] 210.111452
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: DLC Parameter Negotiation RSP (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 14 pri 0
ack_timer 0 frame_size 30 max_retrans 0 credits 7
Change-Id: Ifd466db6b3b868d04e38db02ebad6e47ab2da030
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Each public header file needs the #ifdef guards as well as a
declaration for C++ compatibility.
Change-Id: If270de1ee74e2e74eab02d218417d80fcbf422ac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HCI RAW channel API is intended to expose HCI interface to the remote
entity. The local Bluetooth controller gets owned by the remote entity
and host Bluetooth stack is not used. RAW API provides direct access
to packets which are sent and received by Bluetooth HCI drivers.
Change-Id: I4ba2b7ca2c2b0d6c5de6ef1f231d1c5b82125e09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for setting default BR/EDR name on init. For now
this is just static configuration but can be extended later on
to allow runtime configuration if requested.
< HCI Command: Write Local Name (0x03|0x0013) plen 248
Name: Zephyr
> HCI Event: Command Complete (0x0e) plen 4
Write Local Name (0x03|0x0013) ncmd 1
Status: Success (0x00)
Change-Id: I59ecfc2be8e55c6f90cdb0f12c6fed7f7ce976f8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Profiles can use this API to register the RFCOMM server channel.
DLC structure which represents individual connnection on a particular
server channel has to be defined in the profile and provide it in
accept callback.
Change-Id: I14e607ca65a29f29389deb2ac5d0658f5cd92883
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's a need to add timeout support for control commands on BR/EDR
transport. So far RTX timer feature has application to control protocols
only on LE. Here 'rtx_work' member is moved to common L2CAP context to
safe memory footprint and prepare L2CAP layer to handle RTX timeout
in BR/EDR context.
Change-Id: I9938268a5c4e5dd1f980bb3ec8697d0209c24065
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The toolchain headers included an abstraction for defining symbol
names in assembly context in the situation where we're using a
DOS-style assembler that automatically prepends an underscore to
symbol names.
We aren't. Zephyr is an ELF platform. None of our toolchains do
this. Nothing sets the "TOOL_PREPENDS_UNDERSCORE" macro from within
the project, and it surely isn't an industry standard. Yank it out.
Now we can write assembler labels in natural syntax, and a few other
things fall out to simplify too.
(NOTE: these headers contain assembly code and will fail checkpatch.
That is an expected false positive.)
Change-Id: Ic89e74422b52fe50b3b7306a0347d7a560259581
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were almost exactly the same and had already started
bit-rotting (note the missing net_l2 section in linker_harvard.ld)
Issue: ZEP-528
Change-Id: I5039a2c1b86c5764a361b268c33ae8b17da1a9e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use the ATOMIC_DEFINE helper that exists for defining bit fields with
a given name and number of needed bits.
Change-Id: I5262de29f9b2788a16cf61feef676cdc00615f00
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Correct the argument definition inconsistency for the set
value API. To be consistent with other pwm sub drivers, the
on and off arguments for the set value api are re-defined.
On: how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be asserted.
Off:how far (number of timer count) from the beginning of a PWM
cycle the PWM pin will be de-asserted.
Jira: ZEP-642
Change-Id: I7b39f98f1935fc3499fb36dd813abed62b86c1e7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
