Minor refactoring and commenting of the _SECTION infrastructure in
preparation for future improvements.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
__ASSERT macro will either exit the program (POSIX port) or infint
loop. In both cases printk's return is not necessary.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Bitwise operators should be used only with unsigned integer operands
because the result os bitwise operations on signed integers are
implementation-defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Commit 2b8cf4c98e ("include: kernel: Fix documentation for
TICKLESS_KERNEL API's")' defined a macro to fix documentation when
TKCKLESS_KERNEL is not available but this macro does not return the
same the functions returns, so its use may result in compilation
error.
Another point to consider is that if one is using this function
without it be enabled is better to return a proper error like ENOTSUP
explicitly saying that this is not supported.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
There exist two symbols that became equivalent when PR #9383 was
merged; _SYSCALL_LIMIT and K_SYSCALL_LIMIT. This patch deprecates the
redundant _SYSCALL_LIMIT symbol.
_SYSCALL_LIMIT was initally introduced because before PR #9383 was
merged K_SYSCALL_LIMIT was an enum, which couldn't be included into
assembly files. PR #9383 converted it into a define, which can be
included into assembly files, making _SYSCALL_LIMIT redundant.
Likewise for _SYSCALL_BAD.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The value of sys_clock_ticks_per_sec is obtained using
simple integer division with rounding toward zero. As result
using this variable in _ms_to_ticks() introduces some error.
This commit eliminates sys_clock_ticks_per_sec from equation
used in _ms_to_ticks() removing introduced error.
Also, this commit fixes#8895.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Make several enums, that are used inside structs, to be packed so
that they use only needed amount of memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit only adds checks to core IP stack in subsys/net/ip
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds K-config options that allow the user to
signify an ARM Secure Firmware that contains Secure Entry
functions and to define the starting address of the linker
section that will contain the Secure Entry functions. It
also instructs the linker to append the NSC section if
instructed so by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
User mode may now access the read, write, and trigger APIs.
Unlike supervisor mode, memory slabs are not dealt with directly,
the data is always copied.
A new driver API added to fetch the current channel configuration,
used by the system call handlers.
The i2s_sam_ssc driver updated for the new API. CAVS driver not
modified as there is no user mode port to Xtensa yet.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signals are used to trigger execution states between threads.
These APIs provide functionalities like signal set, clear and
wait.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
These APIs allow creating, allocating and freeing
of mempools.
Note: "Mempool" in CMSIS actually means memslabs in Zephyr.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
CMSIS RTOS API provides a generic RTOS interface for embedded
processors (actually for Cortex-M processors but are generic
enough to be used elsewhere). This header file is for V1 version.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This API makes it possible to delete an existing identity and to flag
its storage slot as unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new API which can be used to reclaim an identity slot for a new
identity. When called, any previous pairings, connections, or other
data will be cleared, and then a new identity will be generated in the
place of the old one.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the storage handling to take into account multiple identities.
We can save a bit of code by using the new bt_id_create() API from
within settings.c.
Also make the treatment of addr & irk parameters to bt_id_create()
consistent, in that NULL is acceptable for both of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1. Fixed error: space required after that close brace '}'
2. Fixed warnings: please, no space before tabs
3. Not fixed: do not add new typedefs
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Make TLS poll function verify if decrypted data is available after
socket has notified activity with POLLIN flag. This prevents from giving
false notifications in case data was received on socket but was consumed
by mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only socket option to set role for DTLS connection. This
option is irrelevant for TLS connections.
This options accepts and integer with a TLS role, compatible with
mbedTLS values:
0 - client,
1 - server.
By default, DTLS will assume client role.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
On flash NVS was stored one entry after another including the metadata
of each entry. This has the disadvantage that when an incomplete write
is performed (e.g. due to power failure) the complete sector had to be
rewritten to get a completely functional system.
The present rewrite changed the storage in flash of the data. For each
sector the data is now written as follows: the data itself at the
beginning of the sector (one after the other), the metadata (id, length,
data offset in the sector, and a crc of the metadata) is written from
the end of the sector. The metadata is of fixed size (8 byte) and for
a sector that is completely occupied a metadata entry of all zeros is
used.
Writing data to flash always is done by:
1. Writing the data,
2. Writing the metadata.
If an incomplete write is done NVS will ignore this incomplete write.
At the same time the following improvements were done:
1. NVS now support 65536 sectors of each 65536 byte.
2. The sector size no longer requires to be a power of 2 (but it
still needs to be a multiple of the flash erase page size).
3. NVS now also keeps track of the free space available.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The nvs module has some disadvantages for larger block size. The data
header and slot are taking up to much space. A rewrite is proposed that
reduces the used storage space for systems with write block size > 4.
The data storage in flash is now one unit consisting of: data_length,
data_id, data and data_length again in a multiple of the write block
size. The data_length at the end is used to validate the correctness of
the flash write and also allows to travel backwards in the filesystem.
As a comparison, on a system with block size 8 byte, a 32 bit values
now fits 1 block including the metadata (length and id). This used to
be 3 blocks.
The data_length will occupy 1 byte if the data length is less than 128
byte, it will occupy 2 byte if the data length is 128 byte or more. The
data length is limited to 16383 byte.
Each write to flash is verified by a read back of the data.
The read performance is improved because reading is done backwards so
the latest items are found first.
When the filesystem is locked it can be unlocked by calling
reinit(), this will clear flash and setup everything for storage.
add sample documentation - README.rst
Update dtsi to include erase_block_size, use erase_block_size in sample
Update prj.conf to include CONFIG_MPU_ALLOW_FLASH_WRITE
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
If the driver has created start() and stop() functions, then those
are called when ethernet L2 is enabled or disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Kernel threads created at build time have unique indexes to map them
into various bitarrays. This patch extends these indexes to
dynamically created threads where the associated kernel objects are
allocated at runtime.
Fixes: #9081
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds the RDC (Resource Domain Controller) peripheral
permissions settings for the i.MX applications cores (Cortex A9 on
i.MX6 and Cortex A7 on i.MX7).
This will enable both Linux (on application's core) and Zephyr (on M4
core) to share the peripherals and coexist.
The settings are defined at devicetree level and applied in the soc.c.
A complete solution should involve the SEMA4 to control the peripherals
access and prevent resource deadlocking and misusage.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.
Fixes#9348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For example for Bluetooth IPSP, it is not needed to join solicited
node multicast group address.
From https://tools.ietf.org/html/rfc7668#section-3.2.2 :
"""
There is no need for 6LN to join the solicited-node multicast address,
since 6LBR will know device addresses and hence link-local addresses
of all connected 6LNs.
"""
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modem drivers need a fast buffer-based receiver for passing data
back and forth from the UART to the driver. This provides an
efficient configuarable driver which merely sends and receives
but doesn't process the data, that's left up to the modem driver.
Signed-off-by: Michael Scott <mike@foundries.io>
This change moves the logic for linearize and append_bytes from
the net_pkt sources into the net_buf sources where it can be
made available to layers which to not depend on net_pkt. It also,
adds a new net_buf_skip() function which can be used to iterated
through a list of net_buf (freeing the buffers as it goes).
For the append_bytes function to be generic in nature, a net_buf
allocator callback was created. Callers of append_bytes pass in
the callback which determines where the resulting net_buf is
allocated from.
Also, the dst buffer in linearize is now cleared prior to copy
(this was an addition from the code moved from net_pkt).
In order to preserve existing callers, the original functions are
left in the net_pkt layer, but now merely act as wrappers.
Signed-off-by: Michael Scott <mike@foundries.io>
