Implement bt_smp_auth_passkey_entry() and bt_conn_auth_passkey_entry()
functions to be used by apps and tester.
Change-Id: I600284334c67840dd0c17991596ad31986bf0afd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves SMP related code to smp.c making code similar to the tree
of firmware developers.
Change-Id: I5b43dcbe40a721e11b64cbdd4203406e721f40cd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Update RPC to the newest RPC introducing some security improvements in
the firmware.
Change-Id: If031bb13927d63e029fcc6da34051257d13632a5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move pinmux defintions under board/<board> and have all board
configuration in one single place.
Change-Id: I055b024384fae2938881b1c57d8ce7426e732e92
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For CMSIS we now have HAS_CMSIS which needs to be added to the
SoC definition.
Instead of changing the main Makefile we now include a sub-Makefile
with all related header and library paths that are hosted in
ext/
Move redifintion of LIB_INCLUDE_DIR later to get variables defined
in Makefile.toolchain.*
Change-Id: I9f90f90247c2a66b4565427b89d4e1d4dd5c9622
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the dev name from PWM to PWM_0. This will make it
consistent with other drivers and also fix the device binding
failure in the PWM sample app.
Jira: ZEP-395
Change-Id: I90b945a7e57700d384eaa52e5300c881a3251d83
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This will allow the driver to be fiber and task safe
Change-Id: I916d4ad67ab6f51f41f3d1136c105e4d1445de48
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This will allow the driver to be safe from fibers and task
Change-Id: I6c4c4fc387cf334f0287b8a02982be1941a311fd
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The TX fifo threshold is pretty arbitrary.
Set this too big and too many interrupts will occur
for no good reason. Set it too small, and latency
in the SPI transactions is introduced. User's will probably
have to tune this per their application and SPI frequency, etc.
I think setting this to 50% is a good guess for now.
Change-Id: Ib325d40bc7ee10473d99443b3b3cd00fd6e4b95f
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The ethernet driver generates a lot of spurious interrupts.
These spurious interrupts have two sources:
1) The Mac Management Counter (MMC) module generates a lot of interrupts
(GMI - bit 27 of the status register). Unfortunately the Interrupt
enable register doesn't allow us to enable/disable it (bit 27 is
reserved). Therefore the only way to mask this interrupt is to mask
all the MMC interrupts (register REG_MMC_RX_INTR_MASK,
REG_MMC_TX_INTR_MASK and REG_MMC_RX_IPC_INTR_MASK). By default
these interrupts are not masked.
2) The RX interrupt is not correctly acknowledged. According to the
datasheet, NIS is a sticky bit and must be cleared (by writing 1
to this bit) each time a corresponding bit, which causes NIS to
be set, is cleared.
Change-Id: I2033973849d87cddc328c65d0d4ad36b5a0c934e
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
This adds simple tab completion for shell use convenience.
Change-Id: If90ded32fb5044741232933d2cb0ce626227d025
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register callback that will be called to
perform command completion.
Change-Id: Ide7a0427d9b8bb4dd8cfc0995ef2567b32e89632
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Building microkernel for ARC causes a compiler error
due to missing declaration of _sys_idle_elapsed_ticks.
Declare this as extern.
Jira: ZEP-397
Change-Id: I83701f693fea0fcb1ae2c30e0c52abe7987de1f1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
I notice there are some more places in this file
that can be switched to using tabs.
Change-Id: I7dac2b91f932aa6f167b7eaf93e7c8f571a22d41
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The file gpio_dw_registers.h already had the 4-port GPIO
registers defined, yet the gpio_dw.c implementation didn't
support it properly. There are 4 ports here, not 2, and only
PORTA can support interrupts and debounce.
On the em_starterkit board, for example, PORTA
has 3 bits for buttons: A, L and R. The other 3 ports should not
be used with interrupts & debounce.
I've re-worked this file to derive the port number from the
base address given. The lower 6 bits are divided by 12 to
derive the port number. From this, the registers EXT_PORTA,
EXT_PORTB, EXT_PORTC or EXT_PORTD can be read.
Also, for those ports that don't support interrupts,
set irq_num to 0, and that code will be avoided. I've verified
that I can access GPIO now correctly on the EM Starterkit. The
em_starterkit board support will be submitted soon but I'm
staging in this change first.
Change-Id: I98dbe083e03e046b40e07b4b14a99a39a6d0f0be
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Defer Prepare write errors to be sent in Execute write response
Per Bluetooth Spec. The Attribute Value validation is done when an
Execute Write Request is received. Hence, any Invalid Offset or
Invalid Attribute Value Length errors are generated when an
Execute Write Request is received. Fixes test case
TC_GAW_SR_BI_33_C (run with shell).
Fixes: ZEP-218
Change-Id: I3dc4583f519e0da2e1f741c9b532d6a6c1970225
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This fixes GATT Server indications.
conn handle shall be set to the valid handle, not 0xffff.
If conn passed to bt_gatt_indicate is NULL, indication will be sent
to every client subscribed.
Fix related to ZEP-403
Change-Id: Ie36b957fddfbc5485318bba649d15349e9293868
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Fixed doxygen comments for flash API usage. Clarified the use of
flash_write_protection_set API for write and erase operations.
Jira: ZEP-383
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change-Id: I6a323915c63a393b7be8f96fe3fcd9616a9b21d1
Print flag for write_evt() to distinguish between write and
prepare_write. Add offset printing when reading.
Change-Id: I8b53d8f49657ade39b190ab33e99097bb172077c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix a compile error when trying to set I2C address of LSM9DS0 Gyro to
VCC (0x6B) caused by a typo.
Change-Id: I27850ecd70e715a10b96572aedea0d237dd55cd5
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
I noticed that even though I was building w/o ADC, that some
ADC config symbols were still defined. Adding some "depends on"
to clean that up.
Change-Id: Ie73d131ba1ad63b5f3d920e17b4c7b5a0d785609
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Provide functions of saving and restoring LOAPIC
states to support deep sleep.
Jira: ZEP-223
Change-Id: I1fb427989b021ec8e3a4f6dd0f4766a214360621
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Save and restore IOAPIC flags and irq to vector translation
info for supporting deep sleep.
Jira: ZEP-223
Change-Id: Ifc50a5a72699ff6782ad194d8e96b18fac34da18
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
In scenarios where device PM is enabled and dynamic irqs are
used, move the irq to vector table to RAM and keep it updated,
so that we can use this to restore IOAPIC/LOAPIC vector entries.
Jira: ZEP-224
Change-Id: I0d4350d4e30f8ca337a2a1d4f012748c3cb450f4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This is external source code maintained somewhere else. Put it
under ext/ for clarity and maintainability.
Change-Id: I9e7c9d0948a2ba893006e316dc21d9b1a9edfa93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add I2C QMSI shim driver for sensor system based on QMSI 1.1
Origin: Original
Change-Id: I9c8efe49e8e9b7a5f8496fa49beb68e409148be7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add QMSI 1.1 based GPIO sub-driver for sensor system.
Origin: Original
Change-Id: Ida5565a5911eb55651a11a4ac0b240c624f8e1ca
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add SPI sub-driver for sensor system.
Use SPI irq number definitions already in Zephyr header file.
Origin: Original
Change-Id: I215db3acc535093dd75c0817cbe5af77e6e76e16
Signed-off-by: Baohong Liu baohong.liu@intel.com
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Attributes should have stored their own attribute handle after
registering service. Handle values are assigned to attributes after
registering service and stack has to copy them.
Fixes:
GATT TC_GAD_SR_BV_03_C PASS
Change-Id: I8463340960d663161d0f7990390e60f06a1c7259
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
I've found many problems with the SPI driver and this repairs many of them.
The baud rate divisor was being derived from the CPU clock. But, some
targets may have a seperate clock attached to SPI. If the soc.h file
defines the symbol SPI_DW_SPI_CLOCK, it will use this instead
of CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC for the baud rate calculation.
completed() had a mistake where it would terminate the SPI transaction
too early, well before the tx data has cleared the FIFO. I found I couldn't
drive an OLED display correctly because completed() was wrong.
The repair is to now consider a new flag called spi->last_tx,
which will be set after the TX interrupt occurs with nothing to send any
longer. There is also a while loop added to SPIN until BUSY drops.
Another improvement is that push_data will NOT consider RX fifo size
if there is no RX going on. The calculation here when RX is going on
could go negative. I've added a check for that and prevent TX handling
if RX buffer is full. I think that is the intention -- to deal with RX first
if its fifos are more full.
In spi_dw_transceive, if we are only doing spi_write w/o reading,
don't enable RX interrupts at all. The OLED I'm working with failed
to have a pull-up on MISO SPI signal. As a result, a huge number of
garbage RX events arrive, and the interrupt handler finds there is
no rx buffer, so it tosses the data. But this is a waist of realtime.
It seems WRONG to enable RX interrupts if its something your not using,
so software can GATE these spurious events in this way.
With these changes, SPI can be used much more reliably, with FIFOs
that are deeper, and SPI devices that only require TX.
Change-Id: I0fe0745f2381c61c8a19ce086496b422a32a30a5
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
