Commit graph

58 commits

Author SHA1 Message Date
Fin Maaß 9e8e21b36f drivers: ieee802154: use sys_rand_get directly
use sys_rand_get() directly.

Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
2024-04-05 12:28:46 +02:00
Tomasz Bursztyka af85c8a11d drivers/ieee802154: Use net_pkt API for reading data on upipe driver
Some legacy left overs.
Just simplifying how to read data into a net_pkt.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2024-03-01 15:33:53 +01:00
Pisit Sawangvonganan 80e1482ddd drivers: ieee802154: set 'ieee802154_radio_api' as 'static const'
This change marks each instance of the 'api' as 'static const'.
The rationale is that 'api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.

Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
2024-01-05 09:04:28 +01:00
Flavio Ceolin e7bd10ae71 random: Rename random header
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.

Rename it to random.h and get consistently with other
subsystems.

Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
2023-10-10 14:23:50 +03:00
Florian Grandel a12a6ab5b9 drivers: ieee802154: introduce channel pages
Replaces the previous approach to define bands via hardware capabilities
by the standard conforming concept of channel pages.

In the short term this allows us to correctly calculate the PHY specific
symbol rate and several parameters that directly depend from the symbol
rate and were previously not being correctly calculated for some of the
drivers whose channel pages could not be represented previously:
* We now support sub-nanosecond precision symbol rates for UWB. Rounding
  errors are being minimized by switching from a divide-then-multiply
  approach to a multiply-then-divide approach.
* UWB HRP: symbol rate depends on channel page specific preamble symbol
  rate which again requires the pulse repetition value to be known
* Several MAC timings are being corrected based on the now correctly
  calculated symbol rates, namely aTurnaroundTime, aUnitBackoffPeriod,
  aBaseSuperframeDuration.

In the long term, this change unlocks such highly promising functional
areas as UWB ranging and SUN-PHY channel hopping in the SubG area (plus
of course any other PHY specific feature).

Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
2023-09-27 12:44:15 -04:00
Florian Grandel 1ee4d3ed77 net: l2: ieee802154: document L1/L2 sep. of concerns
The method ieee802154_radio_handle_ack() does not belong to the
PHY/radio layer but to the L2 layer. It is a callback called from the
radio layer into the L2 layer and to be implemented by all L2 stacks.
This is the same pattern as is used for ieee802154_init(). The
'_radio_' infix in this function is therefore confusing and
conceptually wrong.

This change fixes the naming inconsistency and extensively documents
its rationale.

It is assumed that the change can be made without prior deprecation of the
existing method as in the rare cases where users have implemented custom
radio drivers these will break in obvious ways and can easily be fixed.

Nevertheless such a rename would not be justified on its own if it were
not for an important conceptual reason:

The renamed function represents a generic "inversion-of-control" pattern
which will become important in the TSCH context: It allows for clean
separation of concerns between the PHY/radio driver layer and the
MAC/L2 layer even in situations where the radio driver needs to be
involved for performance or deterministic timing reasons. This
"inversion-of-control" pattern can be applied to negotiate timing
sensitive reception and transmission windows, it let's the L2 layer
deterministically timestamp information elements just-in-time with
internal radio timer counter values, etc.

Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
2023-06-17 16:20:21 -04:00
Robert Lubos 387a66131e net: pkt: Introduce minimum length requirement to net_pkt_get_frag()
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.

In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.

Update the existing codebase to provide the expected fragment length,
based on the context.

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
2022-11-19 07:39:32 -05:00
Gerard Marull-Paretas e6a345f967 drivers: ieee802154: uart_pipe: make driver DT-based
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-08-04 13:25:35 +02:00
Pieter De Gendt aba4c4ea3e uart_pipe: move driver from console to serial
The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.

Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
2022-07-07 09:59:49 +02:00
Gerard Marull-Paretas fb60aab245 drivers: migrate includes to <zephyr/...>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-05-06 19:58:21 +02:00
Gerard Marull-Paretas ed4dd0e9bb drivers: ieee802154: remove usage of device_pm_control_nop
device_pm_control_nop is now deprecated in favour of NULL.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2021-04-28 10:55:49 -04:00
Tomasz Bursztyka e18fcbba5a device: Const-ify all device driver instance pointers
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.

A coccinelle rule is used for this:

@r_const_dev_1
  disable optional_qualifier
@
@@
-struct device *
+const struct device *

@r_const_dev_2
 disable optional_qualifier
@
@@
-struct device * const
+const struct device *

Fixes #27399

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-09-02 13:48:13 +02:00
Tomasz Bursztyka 98d9b01322 device: Apply driver_api/data attributes rename everywhere
Via coccinelle:

@r_device_driver_api_and_data_1@
struct device *D;
@@
(
D->
-	driver_api
+	api
|
D->
-	driver_data
+	data
)

@r_device_driver_api_and_data_2@
expression E;
@@
(
net_if_get_device(E)->
-	driver_api
+	api
|
net_if_get_device(E)->
-	driver_data
+	data
)

And grep/sed rules for macros:

git grep -rlz 'dev)->driver_data' |
	xargs -0 sed -i 's/dev)->driver_data/dev)->data/g'

git grep -rlz 'dev->driver_data' |
	xargs -0 sed -i 's/dev->driver_data/dev->data/g'

git grep -rlz 'device->driver_data' |
	xargs -0 sed -i 's/device->driver_data/device->data/g'

Fixes #27397

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-08-11 19:30:53 +02:00
Flavio Ceolin c4f7faea10 random: Include header where it is used
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.

Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
2020-07-08 21:05:36 -04:00
Kumar Gala a1b77fd589 zephyr: replace zephyr integer types with C99 types
git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-06-08 08:23:57 -05:00
Robert Lubos 1fb418df4c net: ieee802154_radio: Allow to specify TX mode
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.

This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA

Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
2020-04-03 14:07:41 +03:00
Tomasz Bursztyka 4ae72db135 net: Enable PM settings on network devices
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.

All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-03-27 14:48:30 +02:00
Peter Bigot 6a964663b1 treewide: use full path to console/uart_pipe.h header
The build infrastructure should not be adding the drivers subdirectory
to the include path.  Fix the legacy uses that depended on that
addition.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-01-26 17:52:12 +01:00
Anas Nashif f2cb20c772 docs: fix misspelling across the tree
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-06-19 15:34:13 -05:00
Tomasz Bursztyka cf322c44db net: Switch usage of net_pkt_get_reserve to net_pkt_alloc
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2019-03-20 10:27:14 -05:00
Tomasz Bursztyka 88b2535e0d drivers/ieee802154: Fix UPIPE driver at boot
Before it is initialized, upipe_dev is not set. Fixes this issue:

SeaBIOS (version rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org)
Booting from ROM..***** CPU Page Fault (error code 0x00000000)
Supervisor thread read address 0x00000008
PDE: 0x025 Present, Read-only, User, Execute Enabled
PTE: 0x00 Non-present, Read-only, Supervisor, Execute Enabled
Current thread ID = 0x00401a40
eax: 0x00000000, ebx: 0x0040c668, ecx: 0x00000001, edx: 0x000002f8
esi: 0x0040ac5b, edi: 0x0040ac38, ebp: 0x0040b4a8, esp: 0x0040b498
eflags: 0x00000202 cs: 0x0008
call trace:
eip: 0x00008651
     0x000082a3 (0x400a8d)
     0x00008b12 (0x40c668)
     0x00008632

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2019-01-08 11:25:33 +02:00
Tomasz Bursztyka e97a543e9b net/pkt: Remove parameters to "reserve" some headroom
Such parameter is not used anymore, it was defaulted to 0 previously.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-12-14 14:16:37 +01:00
Tomasz Bursztyka 6ea225e34a net/ieee802154: Finally removing usage of ll_reserve in L2
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-12-14 14:16:37 +01:00
Patrik Flykt 8ff96b5a57 drivers: Add 'U' to unsigned variable assignments
Add 'U' to a value when assigning it to an unsigned variable.
MISRA-C rule 7.2

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
2018-12-04 22:51:56 -05:00
Tomasz Bursztyka ebb40ba338 net/ieee802154: Switch to L2 sending path
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.

Applying changes to Openthread L2 as well.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-11-30 11:12:13 -08:00
Andrei Emeltchenko 13b02d620c ieee802154: Allow to set debug for RAW_CHANNEL
Allow to set debug also for RAW_CHANNEL and set general debug template
instead of networking one.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2018-11-15 08:42:52 -05:00
Kumar Gala aa2bdbe322 drivers: Remove board.h include
We either don't need board.h in the driver or we should be include soc.h
instead.

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-11-01 13:21:11 -04:00
Jukka Rissanen 90dc38f8c9 drivers: ieee802154: Convert to use new logging
Convert the IEEE 802.15.4 drivers to use the new logging system.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-10-04 14:13:57 +03:00
Mark Ruvald Pedersen d67096da05 portability: Avoid void* arithmetics which is a GNU extension
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.

Pointer arithmetics over void types is:
 * A GNU C extension
 * Not supported by Clang
 * Illegal across all ISO C standards

See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html

Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
2018-09-28 07:57:28 +05:30
Flavio Ceolin da49f2e440 coccicnelle: Ignore return of memset
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.

The only directory excluded directory was ext/* since it contains
only imported code.

Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
2018-09-14 16:55:37 -04:00
Tomasz Bursztyka 39db4f48d7 drivers/ieee802154: Fix settings channel/tx power in uart pipe driver
Being stopped or not should not be a blocker on these settings (real
hardware can get these settings configured while not being in rx/tx
mode for instance).

Fixes #8528

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-07-24 20:40:51 +03:00
Tomasz Bursztyka 49bd1e9c6f ieee802154: Add support for filtering source short/ieee addresses
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.

Fixes #5714

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-05-17 16:18:53 +03:00
Jukka Rissanen 47dafffb67 net: if: Separate IP address configuration from net_if
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-03-27 10:06:54 -04:00
Pedro Martucci ede5b8ffc3 drivers/ieee802154: Add hw filtering support for upipe driver
Implements HW filtering for IEEE802.15.4 UART Pipe driver.

Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
2018-02-20 14:47:14 +02:00
Jukka Rissanen dc3f2455d7 drivers: ieee802154: uart: Do not send FCS bytes to peer
No need to send FCS bytes as the monitor_15_4 is configured to not
expect them. If we change the monitor_15_4 to use them, then we would
need to put correct values into these two FCS bytes.
So cleanest solution is not to send FCS bytes at all.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-10-26 14:51:56 +03:00
Tomasz Bursztyka ea0aee2bb3 drivers/ieee802154: Stop exposing old radio API functions
set_ieee_addr, set_short_addr and set_pan_id are now unused by L2, so
removing their exposure through the radio API.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-10-13 13:48:32 +03:00
Tomasz Bursztyka b2726e14a6 drivers/ieee802154: Implement get_capabilities in existing drivers
Further support will need work per-driver basis, as soon as the L2 will
be able to make usage of such support.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-10-13 13:48:32 +03:00
Tomasz Bursztyka eb7b29e5cf drivers/ieee802154: Fix regression in uart pipe driver
A wrong name replacement was applied during commit
db11fcd174

Fixes issue #4165

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-10-04 10:47:08 +03:00
Kumar Gala a509441210 net: convert to using newly introduced integer sized types
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.

Jira: ZEP-2051

Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-21 09:30:38 -05:00
Tomasz Bursztyka db11fcd174 net/net_pkt: Fully separate struct net_pkt from struct net_buf
- net_pkt becomes a stand-alone structure with network packet meta
  information.
- network packet data is still managed through net_buf, mostly named
  'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
  or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
  memory when TCP is enabled.

Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-04-21 14:19:50 +03:00
Tomasz Bursztyka bf964cdd4c net: Renaming net nbuf API to net pkt API
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.

Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).

Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.

Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-04-21 14:19:50 +03:00
Jukka Rissanen 5197266768 net: nbuf: Use net_nbuf_get_frag() to allocate a fragment
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.

Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-03-09 20:33:43 +02:00
Jukka Rissanen d32503f57e net: nbuf: Split one global DATA pool to RX and TX DATA pools
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.

Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-03-09 20:33:43 +02:00
Jukka Rissanen c85127db80 drivers/ieee802154/pipe: Use net_nbuf_unref to release net_buf
Using net_nbuf_unref to release the net_buf so that we can
debug the allocations more easily. It is ok to use the original
net_buf_unref() too, we just miss some important net_buf
housekeeping information if done like that.

Change-Id: Ieb7b39ed525bfc46eb5c07a01f2a3a75fdbeb9fd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-02-22 17:28:26 +02:00
Jukka Rissanen 4eb2020055 net: Set the network link address type when setting link address
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.

Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-02-22 17:28:25 +02:00
Jukka Rissanen bd3908b2a9 net: nbuf: Add timeout to net_buf getters
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
	net_nbuf_get_rx()
	net_nbuf_get_tx()
	net_nbuf_get_data()
	net_nbuf_get_reserve_rx()
	net_nbuf_get_reserve_tx()
	net_nbuf_get_reserve_data()
	net_nbuf_copy()
	net_nbuf_copy_all()
	net_nbuf_push()
	net_nbuf_append()
	net_nbuf_write()
	net_nbuf_insert()

Following convinience functions have not been changed
	net_nbuf_append_u8
	net_nbuf_append_be16
	net_nbuf_append_be32
	net_nbuf_insert_u8
	net_nbuf_insert_be16
	net_nbuf_insert_be32
	net_nbuf_write_u8
	net_nbuf_write_be16
	net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.

Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-02-08 10:12:35 +02:00
Wojciech Bober 573774a9bf drivers/net/ieee802154: Change configuration prefix
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.

Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
2017-02-08 10:12:35 +02:00
Tomasz Bursztyka 83ed3a29be net/ieee802154: Modify radio TX function signature
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.

Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.

Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27 12:35:53 +02:00
David B. Kinder ac74d8b652 license: Replace Apache boilerplate with SPDX tag
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.

Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.

Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file.  Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.

Jira: ZEP-1457

Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 03:50:58 +00:00
Johann Fischer ce189f84a9 ieee802154: conf: add common log level
Add common log level for all IEEE802154 drivers.

Change-Id: If92c96b14e630d4482aadf9cacb25662d6663399
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-01-13 10:29:00 +01:00