Should be --bindings-dirs, not --bindings-dir, but the 'argparse' module
supports shortening flags, so it worked anyway.
Broke my grepping though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This PR adds the possibility to specify ZEPHYR_EXTRA_MODULES from an
environmental variable. To add a custom module mymodule in
path/mymodule the variable ZEPHYR_EXTRA_MODULES can be set in
`.zephyrrc` as `export ZEPHYR_EXTRA_MODULES=path/mymodule`.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
We are observing warnings when test-compiling toolchain flags that
look like:
cannot find entry symbol _start; defaulting to 00000000000010d4
To fix this warning we explicitly set an entry point to an arbitrary
address. The files are only compiled, not run, so the entry point does
not need to be correct.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Mimic what we have in cmake/compiler/gcc/target.cmake for clang
targetting ARM. Match gcc behavior by setting -fshort-enums
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Encountered situation when sdk_version string was empty
(as the result of corrupted installation).
The version should had 0.0.0 format.
Patch add check for this and descriptive failure message.
Objective is to help the user to recognize the installation failure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Some confluence of recent changes resulted in builds with
application-specific bindings being unable to find bindings present in
the system directory. Add quotes and splits as necessary to propagate
multiple directories through the system.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add qemu_x86_long board (with CONFIG_X86_LONGMODE=y) for testing.
This requires adding support to soc/ia32 for long mode (trivial),
and adding a quick 64- to 32-bit ELF conversion before invoking
QEMU, which apparently doesn't like 64-bit kernel files.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
* Add support to search for a board specific shield in
<SHIELD DIR>/boards/<SHIELD>/<BOARD>.{overlay,conf}. So we can
support something like:
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.overlay
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.conf
Fixes#19078
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Fix dir name when shield name doesn't match the dir name. So for
shield 'x_nucleo_iks01a3_shub' we will look in now for
x_nucleo_iks01a3/boards/<BOARD>.{overlay,conf} instead of
x_nucleo_iks01a3_shub/boards/<BOARD>.{overlay,conf}
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move handling for shield boards/board.overlay, shield.conf and
boards/board.conf inside the SHIELD_LIST check.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It turns out that 'check_compiler_flag' has not been working for flags
that start with -Wno-. This has caused old compilers to accidentally
use flags that they do not support.
To fix this we check for compatibility with the appropriate -W flag
instead and infer the -Wno- compatibility from this check.
The root cause of this problem is explained well here:
https://github.com/zephyrproject-rtos/zephyr/pull/18922#discussion_r321537098
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Error-out when 'project' is invoked before boilerplate.cmake is
included. This is not supported and causes obscure errors.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Drop the old deprecation warning about
ZEPHYR_TOOLCHAIN_CAPABILITY_CACHE. Sufficient time has passed to allow
users to migrate.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We need SDK version 0.10.3 to fix a build regress on RISC-V when
linking. So bump the version to pickup that fix.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now when SMP support for ARC is available we may introduce a simulation
platform which might be used for testing & development for SMP setups.
One important note is stand-alone nSIM (as well as its "Free" flavour)
doesn't support SMP simulation so we have to switch to use of nSIM via
proprietary MetaWare debugger [1] and so:
1. We introduce new emulation target "mdb"
2. It's only possible to run that platform for those who
have MetaWare tools installed and valid license.
Though QEMU port for ARC is in work at the moment and once we
open that port and it has SMP support we'll switch to it and everybody
will be able to try ARC HS with SMP.
[1] https://www.synopsys.com/dw/ipdir.php?ds=sw_metaware
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The xlnx-zcu102 qemu machine is the only one that supports a Cortex-R
processor. However, its main CPUs are Cortex A53s which requires the
aarch64 qemu binary to run.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We want to use the riscv64 toolchain across the board for RISC-V. That
requires a min of the 0.10.2 SDK, so bump the version before we make
that change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The SDK version is of the form X.Y.Z. Change the cmake scripts to be
based on X.Y of the version. This allows us to easily support newer
toolchains without having to explicitly add cmake files for the version
as well as removes duplication between those files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Depending on how compiler is built, it prints a different include
directory with `--print-file-name=include`. What we want, instead, is
directories with `stddef.h` and `include-fixed/limits.h`.
This commit explicitly specify the header files we want to use, then
take the directory from the returned path.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
This abstracts the interface for generation of the strip command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the readelf command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objdump command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objcopy command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
ARC nSIM simulates pretty much any modern ARC core,
moreover it emulates a lot of different core features so
it is possible to play with them even wo real hardware.
Thus we add yet another ARC core family to be used on simulated
nSIM board.
For now it's just a basic configuration with ARC UART for
smoke-testing of Zephyr on ARC HS CPUs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The method for getting a memory usage report printed during build, is
based on a GNU linker (ld) option flag, and thus is not necessarily
supported by other toolchain binary tools.
The introduced cmake macro allows for a given toolchain to specify how
the memory usage report is to be generated, and whether the command for
generation, if any, is to be added to the post_build_commands and the
post_build_byproducts lists of the top level CMakeLists.txt
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This forms the foundation for the abstraction of the binary tools,
where the following steps are taken:
- Move binary tool resolving, such as objcopy, objdump, readelf and
so forth, out of compiler definitions and place in a dedicated binary
tools folder with the binary tools supplier as subfolder, similar to
the compiler and linker directories.
- Create binary tool sets, gnu, host-gnu and llvm.
- Each toolchain selects the required set of binary tools by setting
BINTOOLS via its generic.cmake as it also does for compiler and linker.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This toolchain is no londer supported or needed. It was used to build
configurations that are now being removed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The macro, toolchain_cc_produce_debug_info, adds the compiler specific
flag for enabling the production of debugging information in the
toolchain native format.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
In order for CMake and Python to interact correctly when the former
invokes the latter, ensure that Python uses UTF-8 encodings when
interacting with stdout and stdin on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We don't generate any CONFIG_ prefixed symbols from dts files so we
don't need to try and import them in anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need to pass -m64 instead of -m32 when CONFIG_64BIT is set.
This is pretty x86 centric. Many platforms don't have the ability
to select between 32-bits or 64-bits builds and either of those should
be dropped in that case with restriction on the available configuration
done elsewhere. But for the time being this allows for testing both.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
