During swap the required page tables are configured. The outgoing
thread's memory domain pages are reset and the incoming thread's
memory domain is loaded. The pages are configured if userspace
is enabled and if memory domain has been initialized before
calling swap.
GH-3852
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added architecture specific support for memory domain destroy
and remove partition for arm and nxp. An optimized version of
remove partition was also added.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
STM32 UART driver was using a mix of LL/HAL APIs. This commit removes
calls to HAL API and replaces them with LL APIs. No functional change
have been seen during non regression testing.
But we could note a direct gain of 1Kb of ROM
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Because the mcux shim drivers will soon depend on a clock control
interface, enable the mcux sim clock control driver by default on all
Kinetis SoCs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Looking up the PTE flags was page faulting if the address wasn't
marked as present in the page directory, since there is no page table
for that directory entry.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a USB controller driver for STM32F4xx devices using
the STM32 Cube HAL_PCD framework. This has been tested with
the cdc_acm driver on a 96b_carbon board (STM32F401RE).
This is a refactoring of:
usb: usb_dc_stm: Add support for STM32Cube HAL_PCD USB driver
Signed-off-by: Christer Weinigel <christer@weinigel.se>
[daniel.thompson@linaro.org: Removed STM32F40(157) defconfig changes
together with STM32F4Discovery pinmux and defconfig changes, updated
clock settings and pad configuration to match latest mainline]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[giannis.damigos@gmail.com: Change uint*_t types to u*_t types,
change SYS_LOG_USB_DC_STM_LEVEL to SYS_LOG_USB_DRIVER_LEVEL and
update pinmux to match latest arm branch]
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
At very low optimization levels, the call to
K_THREAD_STACK_BUFFER doesn't get inlined, overflowing the
tiny stack.
Replace with _ARCH_THREAD_STACK_BUFFER() which on x86 is
just a macro.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Indicate to users that this feature isn't fully baked yet.
This will be reverted for 1.11 release.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Userspace is built on top of hardware stack protection and assumes
it is there. We can't enable this unless ARCH_HAS_USERSPACE is defined
anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Silicon Labs EFM32 Wonder Gecko MCU includes:
* Cortex-M4F core at 48MHz
* up to 256KB of flash and 32KB of RAM
* USB with host and OTG support
* multiple low power peripherals
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Also provide their prototypes in `soc.h`. This should help
readability, since some ROM functions, with their names as provided by
Espressif, have sometimes the same prefix as Zephyr APIs.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Use the define generated by the DTS instead of using the FLASH_ALIGN
alias. The latter is an internal mcuboot name. We shouldn't need it in
Zephyr itself.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This workaround fixes the issue that, after pin reset, RESETREAS bits
other than RESETPIN might also be set.
The workaround was added to both nRF52832 and nRF52840 SoCs.
Signed-off-by: Thiago Silveira <thiago@exati.com.br>
802.15.4 is the networking hardware available in KW41Z SoC (and
supported by Zephyr). So, if networking in enabled, automatically
select the corresponding driver. This is similar to how frdm_k64f
automatically selects Ethernet driver, 96b_carbon selects BLE/IPSP
drivers, etc. (But we apply it on SoC level to reuse across the
boards.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For 'rep stosl' ECX isn't a size value, it's how many times to repeat
the 4-byte string copy operation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some our Zephyr tools don't like seeing UTF-8 characters, as reported in
issue #4131) so a quick scan and replace for UTF-8 characters in .rst,
.h, and Kconfig files using "file --mime-encoding" (excluding the /ext
folders) finds these files to tweak.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add the following application-facing memory domain APIs:
k_mem_domain_init() - to initialize a memory domain
k_mem_domain_destroy() - to destroy a memory domain
k_mem_domain_add_partition() - to add a partition into a domain
k_mem_domain_remove_partition() - to remove a partition from a domain
k_mem_domain_add_thread() - to add a thread into a domain
k_mem_domain_remove_thread() - to remove a thread from a domain
A memory domain would contain some number of memory partitions.
A memory partition is a memory region (might be RAM, peripheral
registers, flash...) with specific attributes (access permission,
e.g. privileged read/write, unprivileged read-only, execute never...).
Memory partitions would be defined by set of MPU regions or MMU tables
underneath.
A thread could only belong to a single memory domain any point in time
but a memory domain could contain multiple threads.
Threads in the same memory domain would have the same access permission
to the memory partitions belong to the memory domain.
The memory domain APIs are used by unprivileged threads to share data
to the threads in the same memory and protect sensitive data from
threads outside their domain. It is not only for improving the security
but also useful for debugging (unexpected access would cause exception).
Jira: ZEP-2281
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
- syscall.h now contains those APIs needed to support invoking calls
from user code. Some stuff moved out of main kernel.h.
- syscall_handler.h now contains directives useful for implementing
system call handler functions. This header is not pulled in by
kernel.h and is intended to be used by C files implementing kernel
system calls and driver subsystem APIs.
- syscall_list.h now contains the #defines for system call IDs. This
list is expected to grow quite large so it is put in its own header.
This is now an enumerated type instead of defines to make things
easier as we introduce system calls over the new few months. In the
fullness of time when we desire to have a fixed userspace/kernel ABI,
this can always be converted to defines.
Some new code added:
- _SYSCALL_MEMORY() macro added to check memory regions passed up from
userspace in handler functions
- _syscall_invoke{7...10}() inline functions declare for invoking system
calls with more than 6 arguments. 10 was chosen as the limit as that
corresponds to the largest arg list we currently have
which is for k_thread_create()
Other changes
- auto-generated K_SYSCALL_DECLARE* macros documented
- _k_syscall_table in userspace.c is not a placeholder. There's no
strong need to generate it and doing so would require the introduction
of a third build phase.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
SoCs outside the Kinetis family can have the TRNG module, so move the
HAS_TRNG config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the RNGA module, so move the
HAS_RNGA config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the FTM module, so move the
HAS_FTM config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Note that 'select HAS_FTM' was previously missing from Kconfig.soc and
is now fixed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the ADC16 module, so move the
HAS_ADC16 config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the LPSCI module, so move the
HAS_LPSCI config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SoCs outside the Kinetis family can have the LPUART module, so move the
HAS_LPUART config from arch/arm/soc/nxp_kinetis to ext/hal/nxp/mcux
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Move all QEMU related defines to the boards and cleanup xtensa platforms
which were marked to be QEMU capable by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
mcuboot_constraints.h had FLASH information related to the SoC that
should be maintained as part of the SoC and not in the subsystem. Also
fixed Makefiles to check for IMG_UTIL Kconfig and not MCUBOOT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A quick look at "man syscall" shows that in Linux, all architectures
support at least 6 argument system calls, with a few supporting 7. We
can at least do 6 in Zephyr.
x86 port modified to use EBP register to carry the 6th system call
argument.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Instead of a common system call entry function, we instead create a
table mapping system call ids to handler skeleton functions which are
invoked directly by the architecture code which receives the system
call.
* system call handler prototype specified. All but the most trivial
system calls will implement one of these. They validate all the
arguments, including verifying kernel/device object pointers, ensuring
that the calling thread has appropriate access to any memory buffers
passed in, and performing other parameter checks that the base system
call implementation does not check, or only checks with __ASSERT().
It's only possible to install a system call implementation directly
inside this table if the implementation has a return value and requires
no validation of any of its arguments.
A sample handler implementation for k_mutex_unlock() might look like:
u32_t _syscall_k_mutex_unlock(u32_t mutex_arg, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t arg5, void *ssf)
{
struct k_mutex *mutex = (struct k_mutex *)mutex_arg;
_SYSCALL_ARG1;
_SYSCALL_IS_OBJ(mutex, K_OBJ_MUTEX, 0, ssf);
_SYSCALL_VERIFY(mutex->lock_count > 0, ssf);
_SYSCALL_VERIFY(mutex->owner == _current, ssf);
k_mutex_unlock(mutex);
return 0;
}
* the x86 port modified to work with the system call table instead of
calling a common handler function. fixed an issue where registers being
changed could confuse the compiler has been fixed; all registers, even
ones used for parameters, must be preserved across the system call.
* a new arch API for producing a kernel oops when validating system call
arguments added. The debug information reported will be from the system
call site and not inside the handler function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- _arch_user_mode_enter() implemented
- _arch_is_user_context() implemented
- _new_thread() will honor K_USER option if passed in
- System call triggering macros implemented
- _thread_entry_wrapper moved and now looks for the next function to
call in EDI
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
