This patch changes clock initialization sequence to initialize external
cristal oscillators only if it was not done before. Initialization of
external cristal oscillators may be performed by the bootloader.
Tested on BRD4250B evaluation board.
Fixes#9471
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The fake exception return is used to jump to user mode.
So the init status of user thread is in exception mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
stack check bit of status32/sec_stat will be cleared
automically in exception entry.
so remove the redundent codes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this feature specific to QMSI and available through samples only
to allow for migration to tracing hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from ARC based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The benchmark application timing_info needs certain hooks to be
present in the kernel to get the accurate measurements. This
patch adds these hook at all the required locations.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This commit adds an __ASSERT line in _get_region_attr_by_type,
to signal an error if the supplied MPU region type is not valid.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a UL suffix after numerical digits to ensure
the correctness of certain shift operations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit implements and integrates the ARMv8-M MPU driver
into the memory protection system for ARM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors arm_mpu.c by moving all internal function
implementation that is specific to ARMv7-M architecture to a
separate internal header file. This allows to easily extend
arm_mpu.c to support ARMv8-M by including all ARMv8-M-specific
implementation in a similar internal header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors the _get_region_attr_by_conf(.) function,
so it does the following:
- it is renamed to _get_ram_region_attr_by_conf(), to reflect
that it is only used to configure RAM MPU regions.
- it gets an arm_mpu_region_attr_t object structure pointer
to fill-in with the derived region attributes.
- it takes an additional argument (the region base address),
which allows the function to have a common signature with the
ARMv8-M version of it (where the attribute derivation needs
the base address).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors the _get_region_attr_by_type(.) function,
so it does the following:
- it takes an arm_mpu_region_attr_t object pointer and use it
to fill-in the derived region attributes.
- it performs only the distinguishing between the different MPU
region types, hiding the actual MPU-specific implementation
in internal functions.
- it takes an additional argument (the region base address),
which allows the function to have a common signature with the
ARMv8-M version of it (where the attribute derivation needs
the base address).
- it returs 0 or succes and a negative non-zero integer
to indicate an error.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adapts the _region_init(.) function so it can use
the rasr field of the arm_mpu_region_attr structure, when it
configures the RASR register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added a SYS_INIT for SoC level initialization of Intel S1000
Added routines for setting up resource ownership for
DMA, I2S
Added routine to setup power gating and clock configuration
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The choice that contains FP_HARDAPI and FP_SOFTAPI already depends on
FLOAT, so the choice symbols don't have to.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Bitwise operators should be used only with unsigned integer operands
because the result os bitwise operations on signed integers are
implementation-defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for the STM32 Real-Time-Clock leveraging the LL APIs
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
FE310 is the name of one SoC out of a range of products in the SiFive
Freedom line. The FE310 SoC port in Zephyr is compatible with all of
these products, so rename the SoC to SiFive Freedom
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Add support for usbotg_fs, by adding the DT fixup, pinmux macros,
and the DT entries in stm32f2.dtsi.
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
There exist two symbols that became equivalent when PR #9383 was
merged; _SYSCALL_LIMIT and K_SYSCALL_LIMIT. This patch deprecates the
redundant _SYSCALL_LIMIT symbol.
_SYSCALL_LIMIT was initally introduced because before PR #9383 was
merged K_SYSCALL_LIMIT was an enum, which couldn't be included into
assembly files. PR #9383 converted it into a define, which can be
included into assembly files, making _SYSCALL_LIMIT redundant.
Likewise for _SYSCALL_BAD.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Move the MEPC increment logic in __irq_wrapper such that the saved MEPC
is only incremented on a syscall (ecall instruction).
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit removes the depreciated "default n" entries from
boolean K-config options in arch/arm.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The L433 chip is a superset of the L432, just grabbing a few additional
interfaces (LCD, I2C2, USART3, SPI2, SDMMC). All the support/HAL files
are already there, so enabling these is just a matter of build system
setup.
Tested on an application specific board (builds correctly and I2C2
works.) I unfortunately don't have a nucleo/discovery board to create a
reference board for.
Signed-off-by: David Lamparter <equinox@diac24.net>
When building a Secure firmware image, instruct the linker to
generate a symbol table with the entry veneers, to allow a Non
Secure firmware image to access Secure Entry functions via the
entry veneers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds K-config options that allow the user to
signify an ARM Secure Firmware that contains Secure Entry
functions and to define the starting address of the linker
section that will contain the Secure Entry functions. It
also instructs the linker to append the NSC section if
instructed so by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contribute an internal ARM API that enables the
user to confgure an ARM Security Attribution Unit region. It
also defines ARM_SAU as a K-config option to indicate that
an MCU implements the ARM SAU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
