When secondary cores are booted, they use the dummy thread and
the IRQ stack until they switch over to a real thread. Therefore
dummy threads shouldn't be skipped when cohering outgoing thread
stack, only threads with zero stack size should be skipped.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When we reach this code in interrupt context, our upper GPRs contain a
cross-stack call that may still include some registers from the
interrupted thread. Those need to go out to memory before we can do
our cache coherence dance here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Both new thread creation and context switch had the same mistake in
cache management: the bottom of the stack (the "unused" region between
the lower memory bound and the live stack pointer) needs to be
invalidated before we switch, because otherwise any dirty lines we
might have left over can get flushed out on top of the same thread on
another CPU that is putting live data there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The Xtensa L1 cache layer has straightforward semantics accessible via
single-instructions that operate on cache lines via physical
addresses. These are very amenable to inlining.
Unfortunately the Xtensa HAL layer requires function calls to do this,
leading to significant code waste at the calling site, an extra frame
on the stack and needless runtime instructions for situations where
the call is over a constant region that could elide the loop. This is
made even worse because the HAL library is not built with
-ffunction-sections, so pulling in even one of these tiny cache
functions has the effect of importing a 1500-byte object file into the
link!
Add our own tiny cache layer to include/arch/xtensa/cache.h and use
that instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a bunch of dead historical cruft floating around in the
arch/xtensa tree, left over from older code versions. It's time to do
a cleanup pass. This is entirely refactoring and size optimization,
no behavior changes on any in-tree devices should be present.
Among the more notable changes:
+ xtensa_context.h offered an elaborate API to deal with a stack frame
and context layout that we no longer use.
+ xtensa_rtos.h was entirely dead code
+ xtensa_timer.h was a parallel abstraction layer implementing in the
architecture layer what we're already doing in our timer driver.
+ The architecture thread structs (_callee_saved and _thread_arch)
aren't used by current code, and had dead fields that were removed.
Unfortunately for standards compliance and C++ compatibility it's
not possible to leave an empty struct here, so they have a single
byte field.
+ xtensa_api.h was really just some interrupt management inlines used
by irq.h, so fold that code into the outer header.
+ Remove the stale assembly offsets. This architecture doesn't use
that facility.
All told, more than a thousand lines have been removed. Not bad.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
a0 is used as scratch register. Restore value of a0 (return address)
from stack frame before spilling registers on stack
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Only the CAVS 1.5 linker script has full support for the coherence
features, don't advertise it on the other SoC's yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This change uses stack frame to print backtrace once exception occurs
Printing backtrace helps to identify the cause of exception
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Note that this does not enable TLS for all Xtensa SoC.
This is because Xtensa SoCs are highly configurable
so that each SoC can be considered a whole architecture.
So TLS needs to be enabled on the SoC level, instead of
at the arch level.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implement the kernel "coherence" API on top of the linker
cached/uncached mapping work.
Add Xtensa handling for the stack coherence API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Xtensa uses two instructions to perform atomic compare-and-set
instruction: first the comparison register, then the actual
instruction to do compare-and-set. There is a potential that
context switching is performed before these two instructions.
A restored context may have the wrong value in the comparison
register. So we need to save and restore the comparison
register during context switching.
Fixes#21800
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When coming out of an exception, we need to mask interrupts
to avoid races when decrementing the nested count. Move
the instruction that does this earlier.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The struct _caller_saved is not used. Most architectures put
automatically the registers onto stack, in others architectures the
exception code does it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The struct _kernel_ach exists only because ARC' s port needed it, in
all other ports this was defined as an empty struct. Turns out that
this struct is not required even for ARC anymore, this is a legacy
code from nanokernel time.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit removes the custom_data field from _thread_arch
for xtensa platform as it is currently unused.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
There were many platforms where this function was doing nothing. Just
merging its functionality with _PrepC function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The old xtensa layer had an unused/untested facility where it would
apparently try to slave a timer tick to an arbitrary interrupt. The
legacy headers were still checking the kconfigs used to enable that
even though nothing wants it and the new driver has removed them,
breaking builds on platforms like S1000 that still use the older
layer.
Don't try to finess this as these files are going away. Just make
them local preprocessor symbols and set them to the default values
they always had.
(Note: the feature doesn't sound like it would have been so bad,
actually. We should probably crib that idea of having an
"external_tick" driver, but there's no reason for it to have been
arch-specific.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This allows Kconfig to specify which special register is being
used to store the pointer to the _kernel.cpu struct.
Since the SoC itself is highly configurable, sometimes MISC0 is not
available. So this adds the ability to use other special registers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Always compare unsigned interger type with another unsigned
integer type. Currently in nios2, posix, riscv32, x86 and xtensa
we were comparing the _kernel.nested variable with a signed
interger type. Fixed this violation.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
MISRA-C requires that all declarations of a specific function, or
object, use the same names and type qualifiers.
MISRA-C rule 8.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The interrupt stack area wasn't being set to a repeating
0xAA pattern at boot as it should be. This is now done in
kernel_arch_init(), which runs before interrupts are
enabled for the first time.
Fixes#7327
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was a little embarassing. The swap code got this right, and the
interrupt exit path got it right, but on entry we weren't ever saving
the shift and loop registers for the interrupted context.
This almost always worked anyway as the loop registers aren't ever
used in any Zephyr code (gcc won't generate this style of loop AFAICT)
and the SAR shift amount register is generally used only in two pairs
of adjacent instructions making the chance of hitting that exact cycle
quite low in general.
But of course we have shift-happy crypto code in our tests, so this
got caught, thankfully.
See https://github.com/zephyrproject-rtos/zephyr/issues/6470
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When returning into a different thread than we interrupted, we
obviously need to spill all the existing register windows to make sure
all their values are in the old thread's stack. But the code to do
this forgot to reset the current stack pointer to the value it had at
interrupt time (it was still pointing to the saved context below
that), so the caller of the interrupted function was spilling to the
wrong spot.
This wouldn't show up as an instant failure, it would only happen when
switching BACK to the improperly-spilled thread. And even then it
would be a noop if the original interrupt handler was deep enough to
have spilled that function naturally.
In practice, this happened only in some instances on ESP-32 (which has
more windowed registers than qemu) when interrupting the idle thread
(which is very shallow) with a (very simple) timer interrupt. Trivial
to see, hard to find.
See https://github.com/zephyrproject-rtos/zephyr/issues/6346 for more
detail.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The xtensa headers use this for simplicity when SMP is not enabled.
It should still build on older platforms that don't include the
asm2-style CPU pointer scheme.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When in SMP mode, the nested/irq_stack/current fields are specific to
the current CPU and not to the kernel as a whole, so we need an array
of these. Place them in a _cpu_t struct and implement a
_arch_curr_cpu() function to retrieve the pointer.
When not in SMP mode, the first CPU's fields are defined as a unioned
with the first _cpu_t record. This permits compatibility with legacy
assembly on other platforms. Long term, all users, including
uniprocessor architectures, should be updated to use the new scheme.
Fundamentally this is just renaming: the structure layout and runtime
code do not change on any existing platforms and won't until someone
defines a second CPU.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Xtensa register windows have a special exception that happens when the
stack pointer needs to be moved, but the caller function has already
spilled its registers below it.
I thought these were unexercised in Zephyr code, but they turn out to
be thrown by the existing mem_pool tests when run in the 32-register
qemu environment (but not on 64-register hardwre). Because the effect
of the exception is to unspill the caller, there is no good way to
handle this in a traditional handler. Instead put a 5-instruction
stub in front of the user exception handler (i.e. incurring that cost
on every trap and every L1 interrupt) to test before doing the normal
entry.
Works, but would be nicer to optimize this in the future so that only
true alloca exceptions take that cost.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When using _arch_switch() context switching, the thread return value
is a generic hook and not provided by the architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds vectors for all interrupt levels defined by core-isa.h.
Modify the entry code a little bit to select correct linker sections
(levels 1, 6 and 7 get special names for... no particularly good
reason) and to constructed the interrupted PS value correctly (no EPS1
register for exceptions since they had to have interrupted level 0
code and thus differ only in the EXCM bit).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Legacy xtensa had a rather complicated implementation of en/disabling
interrupts, owing to the "software priority" feature (which plays
games with INTENABLE and INTLEVEL to allow for interrupts to interrupt
each other outside their normal priorities). But that's not a Zephyr
feature, it's enabled by a XT_USE_SWPRI value that comes from platform
headers and isn't enabled on any of our boards. Dead code, basically.
Replace with the obvious implementation when asm2 is in use.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was a dead API. Nothing ever used it, it wasn't exposed in any
API headers. It never appeared in documentation. It's not
particularly clear why a Zephy app would want to hook
architecture-specific exceptions instead of simply using the portable
error framework anyway. And it's not supported by asm2. Delete.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing __swap() mechanism is too high level for some
applications because of its scheduler-awareness. This introduces a
new _arch_switch() mechanism, which is a simpler primitive that looks
like:
void _arch_switch(void *handle, void **old_handle_out);
The new thread handle (typically just a stack pointer) is specified
explicitly instead of being picked up from the scheduler by
per-architecture code, and on return the "old" thread handle that got
switched out is returned through the pointer.
The new primitive (currently available only on xtensa) is selected
when CONFIG_USE_SWITCH is "y". A new C _Swap() implementation based
on this primitive is then added which operates compatibly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
SMP needs a new context switch primitive (to disentangle _swap() from
the scheduler) and new interrupt entry behavior (to be able to take a
global spinlock on behalf of legacy drivers). The existing code is
very obtuse, and working with it led me down a long path of "this
would be so much better if..." So this is a new context and entry
framework, intended to replace the code that exists now, at least on
SMP platforms.
New features:
* The new context switch primitive is xtensa_switch(), which takes a
"new" context handle as an argument instead of getting it from the
scheduler, returns an "old" context handle through a pointer
(e.g. to save it to the old thread context), and restores the lock
state(PS register) exactly as it is at entry instead of taking it as
an argument.
* The register spill code understands wrap-around register windows and
can avoid spilling A4-A15 registers when they are unused by the
interrupted function, saving as much as 48 bytes of stack space on
the interrupted stacks.
* The "spill register windows" routine is entirely different, using a
different mechanism, and is MUCH FASTER (to the tune of almost 200
cycles). See notes in comments.
* Even better, interrupt entry can be done via a clever "cross stack
call" I worked up, meaning that the interrupted thread's registers
do not need to be spilled at all until they are naturally pushed out
by the interrupt handler or until we return from the interrupt into
a different thread. This is a big efficiency win for tiny
interrupts (e.g. timers), and a big latency win for all interrupts.
* Interrupt entry is 100% symmetric with respect to medium/high
interrupts, avoiding the problems seen with hooking high priority
interrupts with the current code (e.g. ESP-32's watchdog driver).
* Much smaller code size. No cut and paste assembly. No use of HAL
calls.
* Assumes "XEA2" interrupt architecture, the register window extension
(i.e. no CALL0 ABI), and the "high priority interrupts" extension.
Does not support the legacy processor variants for which we have no
targets. The old code has some stuff in there to support this, but
it seems bitrotten, untestable, and I'm all but certain it doesn't
work.
Note that this simply adds the primitives to the existing tree in a
form where they can be unit tested. It does not replace the existing
interrupt/exception handling or _Swap() implementation.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This needs to be in <arch/cpu.h> so that it can be called
from the k_panic()/k_oops() macros in kernel.h.
Fixes build errors on these arches when using k_panic() or
k_oops().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unconditionally use CONFIG_SIMULATOR_XTENSA to determine if XT_SIMULATOR
or XT_BOARD should be defined.
If CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC, also define XT_CLOCK_FREQ. This
isn't ideal as the clock frequency might be changed in runtime and this
effectively makes it a constant.
Until we can control the clock frequency in runtime, this will suffice.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
A bad rebase of a patch that moved these defines around
unintentionally reverted a necessary change to the coprocessor
save area.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. There are few places we dont convert over to the new
types because of compatiability with ext/HALs or for ease of transition
at this point. Fixup a few of the PRI formatters so we build with newlib.
Jira: ZEP-2051
Change-Id: I7d2d3697cad04f20aaa8f6e77228f502cd9c8286
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit should fix the concern about uninitialized memory of main
thread that was raised in https://gerrit.zephyrproject.org/r/#/c/12920/
The issue is more general, if it happens that the content of the
CPENABLE flag of any thread is set then any other thread using the CP
may cause a memory corruption.
I'd prefer to avoid the issue by initializing the CP descriptor to 0.
The descriptor itself is few words. We set them to 0 up to CP_ASA, which
is set to a real value.
As the dummy thread instantiated at the kernel startup does not use CP,
there is no CP area in its thread memory buffer. However it is mandatory
that it have the CP descriptor and that cpEnable in that descripot is
set to null. This is ensured by adding XT_CP_DESCR_SIZE to
_K_THREAD_NO_FLOAT_SIZEOF.
Change-Id: I6a36b5b363600ea1e6d98ab679981182b2b5a236
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
The issue was that cpStack was changed to a memory buffer by commit
https://gerrit.zephyrproject.org/r/#/c/12816
However the assembly code was expecting it to be a pointer and thus
issuing an indirection, that leads to wrong addresses.
The fix removed this unnecessary indirection and thus the inherent
invalid memory access exception.
Issue: ZEP-1997
Change-Id: I843f049212f2d116a01b05367a284209f463a5e7
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
The CP context area was before on the bottom of the stack just
after the thread descriptor. Now it is moved inside the thread
descriptor to support some kind of memory protection.
Change-Id: Id3ebeaecfd9c2475899713fdc8da583a1f9121f9
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
fibers/tasks are now just threads and we should not be using
struct *tcs any more.
Change-Id: Iee5369abcc66b4357a0c75537025fe8edb0ffbb4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The retval field shall hold the return value itself not a pointer on its
location.
Change-Id: I3f9e225f2bdd501f88441946b5187ebbd17a71e3
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This function needs to be decalred in a file included by _thread_entry.
It also needs to have exit function declared as not returning.
Change-Id: I2a01e7408cf70266351ae5089f45b5d9d009fabe
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Master branch changed requirements for license headers while this
branch has been in development.
Change-Id: I9bce16ff275057a4bb664019628fc9b6de7aef7c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>