Commit graph

12 commits

Author SHA1 Message Date
Kumar Gala
a1b77fd589 zephyr: replace zephyr integer types with C99 types
git grep -l 'u\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/u\(8\|16\|32\|64\)_t/uint\1_t/g"
	git grep -l 's\(8\|16\|32\|64\)_t' | \
		xargs sed -i "s/s\(8\|16\|32\|64\)_t/int\1_t/g"

Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2020-06-08 08:23:57 -05:00
Martí Bolívar
46f47a63ba gpio_utils.h: add helpers for dt node -> port pin mask
This captures a common pattern.

Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2020-04-06 09:14:02 -05:00
Peter Bigot
9022d33fec drivers: gpio: add support for device-specific pin validation
Extend the driver data structure with a field that identifies the pins
supported by the device.  Document the fields and who is responsible
for maintaining them.

Update all configuration functions for specific pins to return an
error if the pin is not supported.

Update all set/get functions for specific pins to assert if the pin is
not supported.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-02-05 12:00:36 +01:00
Peter Bigot
2f3c43251f drivers: gpio: utils: filter pin notifications based on callback
Some drivers masked the set of signaled pins based on enabled
interrupts, some did not.  For those that did not the 2-pin test could
fail.  The documentation does not imply that pins unrelated to the
callback participate in the notification process, so do the filtering
in the generic callback loop.

Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
2020-02-05 12:00:36 +01:00
Patrik Flykt
97b3bd11a7 drivers: Rename reserved function names
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.

Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
2019-04-03 17:31:00 -04:00
Peter A. Bigot
d75495709d drivers: gpio: fix mis-use of slist API in callback processing
The iterator over registered callbacks failed to account for the
possibility that the callback would remove itself from the list.  If
this occurred any remaining callbacks would no longer be reachable from
the node.  Switch to the slist iterator that is safe for self-removal.

Note that the slist API remains unsafe for removal of subsequent nodes.
Even with the corrected code removal of the next callback registration
(cached in tmp) will result in it being called anyway, with the
remaining unremoved registrations not being called.  If the next
callback were removed and re-registered on a different device, the
callbacks would be invoked for the wrong device.

Resolve this by a documentation change describing the conditions under
which a change to callback registration from within a callback are
permitted.  Add a similar note regarding the effect of adding a
callback.  The current event invocation behavior for callbacks added
within an event is explicitly left unspecified, though in the current
slist implementation newly added callbacks will not be invoked until the
next event.

Closes #10186

Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2019-02-05 12:33:25 -06:00
Tomasz Bursztyka
064f5f0cef drivers/gpio: Manage callback addition/removal properly
It needs to verify if the callback was not already installed, and if so:
if is was in controller's list.
It should return an error in case the node is not found though it was
requested to be removed.
If already inserted, it will be silently removed but added again, to
avoid circular list as stated in the bug.

Fixes #11394

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2019-01-25 11:24:29 -05:00
Flavio Ceolin
67ca176754 headers: Fix headers across the project
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.

Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
2018-09-17 15:49:26 -04:00
Kumar Gala
ccad5bf3e3 drivers: convert to using newly introduced integer sized types
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.

Jira: ZEP-2051

Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-21 10:06:48 -05:00
Luiz Augusto von Dentz
2e444cb34c drivers: Convert FOR_EACH macro instances to use CONTAINER
Change-Id: Ifc08d39fe84f522e071d3b9e32479798bbd89c6c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2017-02-10 16:16:16 +00:00
David B. Kinder
ac74d8b652 license: Replace Apache boilerplate with SPDX tag
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.

Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.

Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file.  Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.

Jira: ZEP-1457

Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 03:50:58 +00:00
Tomasz Bursztyka
fea1c49ba2 gpio: Improve the public API to handle multi callbacks
Many sub-systems might require to set a callback on different pins.
Thus enabling it via changing the API.

It is also possible to retrieve private-data in the callback handler
using CONTAINER_OF() macro (include/misc/util.h).

Former API is still available, and is emulated through the new one.
Using both should not be a problem as it's using new API calls.
However, it's now better to start using the new API.

Change-Id: Id16594202905976cc524775d1cd3592b54a84514
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-04-22 22:15:12 -04:00