This commit enables the CMSIS-Core(R) processor interface driver for
the Cortex-R platforms by default.
The CMSIS-Core component provides a set of standard interface functions
to control the Cortex-R series processor cores and will be required by
the arch port as well as other CMSIS library components (e.g. CMSIS-DSP
and CMSIS-NN).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
A single menu within an if like
if FOO
menu "blah"
...
endmenu
endif
can be replaced with
menu "blah"
depends on FOO
...
endmenu
Fix up all existing instances.
Also remove redundant extra menus underneath 'menuconfig' symbols.
'menuconfig' already creates a menu.
Also remove the menu in arch/arm/core/aarch32/Kconfig around the
"Floating point ABI" choice. The choice depends on FLOAT, which depends
on CPU_HAS_CPU, so remove the 'depends on CPU_HAS_FPU' too.
Piggyback removing a redundant 'default n' for BME280.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move PLATFORM_SPECIFIC_INIT declaration from Cortex-M Kconfig to the
ARM arch Kconfig in order to make it available for all ARM variants.
The rationale is that there is really no good reason why
platform-specific initialisation should be a Cortex-M-specific feature
and that Cortex-R port is expected to utilise this in a near future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We allow the run-time, full paritioning of the SRAM space by the
ARMv8-M MPU driver to be an optional feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the function mpu_configure_regions(.) from
arm_mpu_v7_internal.h to arm_mpu.c. The function is to be used
by the both ARMv7-M MPU driver, as well as the ARMv8-M MPU
driver (when it behaves like the ARMv7-M driver).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce MPU_GAP_FILLING Kconfig option that instructs
the MPU driver to enforce a full SRAM partitioning, when it
programs the dynamic MPU regions (user thread stack, PRIV stack
guard and application memory domains) at context-switch. We
allow this to be configurable, in order to increase the number
of MPU regions available for application memory domain programming.
This option is introduced in arch/Kconfig, as it is expected
to serve as a cross-ARCH symbol. The option can be set by the
user during build configuration.
By not enforcing full partition, we may leave part of kernel
SRAM area covered only by the default ARM memory map. This
is fine for User Mode, since the background ARM map does not
allow nPRIV access at all. The difference is that kernel code
will be able to attempt fetching instructions from kernel SRAM
area without this leading directly to a MemManage exception.
Since this does not compromize User Mode, we make the skipping
of full partitioning the default behavior for the ARMv8-M MPU
driver. The application developer may be able to overwrite this.
In the wake of this change we update the macro definitions in
arm_core_mpu_dev.h that derive the maximum number of MPU regions
for application memory domains.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the cortex-r port we are currently using GIC as a fake cascade
controller hooked to a fake parent IRQ #0. And in gic_init() we use
IRQ_CONNECT() to connect this dummy IRQ.
Unfortunately this value is shifted and offset when calling
irq_set_priority_next_level() that tries to set the IRQ priority on a
value of 0xffffffff.
This value is offset again in gic_irq_set_priority() that actually sets
the priority on the PPI #31.
Fix this avoiding to set any priority for IRQ #0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82c ("First commit"). Has never been
used.
Found with a script.
Also remove some pointless menus that have no visible symbols in them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adding r0 to the clobber list in the inline ASM block of
z_arch_switch_to_main_thread(). This instructs assembler
to not use r0 to store ASM expression operands, e.g. in
the subsequent instruction, msr PSR %1.
We also do a minor optimization with the clearing of R1
before jumping to main.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We introduce a Kconfig option to signify whether
an Architecture has the capability of detecting
whether execution is, currently, in a nested
exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors and cleans up __fault, so the function
- reduces to supplying MSP, PSP, and EXC_RETURN to the C
function for fault handling
- simplifies itself, removing conditional
implementation, i.e. based on ARM Secure firmware,
The reason for that is simple: it is much better to write the
fault handling in C instead of assembly, so we really do only
what is strictly required, in assembly.
Therefore, the commit refactors the z_arm_fault() function
as well, organizing better the different functional blocks,
that is:
- unlocking interrupts
- retriving ESF
- asserting for HW errors
- printing additional error logs
The refactoring unifies the way the ESF is retrieved for the
different Cortex-M variants and security execution states.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some documentation for ARM-specific function
z_do_kernel_oops, stating clearly that it is only
invoked inside SVC context. We also comment on
the validity of the supplied ESF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a useful inline comment in the SVC handler (written in
assembly), which identifies one of the function return points
a bit more clearly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit updates all references to HAS_CMSIS to use HAS_CMSIS_CORE
instead. With the changes introduced to allow multiple CMSIS variants
to be specified, the latter is semantically equivalent to the former.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In this commit we implement the assembly functions in userspace.S
- z_arm_userspace_enter()
- z_arm_do_syscall()
- z_arch_user_string_nlen()
for ARMv6-M and ARMv8-M Baseline architecture. We "inline" the
implementation for Baseline, along with the Mainline (ARMv7-M)
implementation, i.e. we rework only what is required to build
for Baseline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In this commit we implement the assembly functions in
swap_helper.S, namely
- z_arm_pendsv()
- z_arm_svc()
for ARMv6-M and ARMv8-M Baseline architecture. We "inline" the
implementation for Baseline, along with the Mainline (ARMv7-M)
implementation, i.e. we rework only what is required to build
for Baseline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not support HW Stack protection capabilities in
Cortex-M Baseline CPUs (unless they have built-in stack
overflow detection capability). We adapt the Kconfig
option to reflect this.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some assembly simplifications, to make code common for ARMv6
and ARMv7 architecture.
We can use ldrb, directly for reading the SVC encoding; this
removes the need for ANDing the result with 0xff right below.
We remove an immediate value of 0 from an str instruction, as
it's redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add more documentation and inline explanatory comments in
assembly sources swap_helper.S and userspace.S and remove
redundant/wrong documentation when applicable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM user space requires ARM_MPU. We can, therefore,
remove the unnecessary #ifdef CONFIG_ARM_MPU blocks
in userspace.S. In addition, we do minor refactoring
in z_arm_userspace_enter(), and z_arm_pendsv(), and
z_arm_svc(), aiming at reducing the push/pop overhead
as much as possible.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch/arm/core is shared between Cortex-M and Cortex-R, so
enhance the file description headers accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A clean-up commit that removes unnecessary inclusions from
assembly files in arm/core and arm/core/cortex_m. It also
ogranizes the inclusions based on the following order and
set of rules:
- never include kernel_structs.h
- include toolchain.h and linker/sections.h in all ASM files
- include offsets-short.h, if ASM accesses offset constants
- include arch/cpu.h, if ASM accesses CMSIS constants
(defined locally in include/arch/arm)
- include file-specific headers, if needed (e.g. vector-table.h)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
There's no compelling reason why this should be inline unlike all
other arches, it's a large function, called exactly once.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add in-line documentation describing the process of register
preservation and exception handling on Cortex-R.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The interrupt exit and swap service routines for Cortex-R
unnecessarily preserve r0 and lr registers when making function calls
using bl instruction.
In case of _IntExit in exc_exit.S, the r0 register containing the
caller mode is preserved at the top, and the lr register can safely be
assumed to have been saved into the system mode stack by the interrupt
service routine.
In case of __svc in swap_helper.S, since the function saves lr to the
system mode stack at the top and exits through _IntExit, it is not
necessary to preserve lr register when executing bl instructions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
- Remove redundant inclusions in irq_init.c
- Remove comment about thread_abort function,
which does not belong in this file (probably
left-out during code refactoring)
- Include arm cmsis.h only under #ifdef CONFIG_ARM
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
when enable CONFIG_CUSTOM_SECTION_ALIGN, it need less alignment
memory for image rom region. But that needs carefully configure
MPU region and sub-regions(ARMv7-M) to cover this feature.
Fixes: #17337.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This commit makes it possible to infer Z_ARCH_EXCEPT()
calls in SVCs that escalate to HardFault due to being
invoked from priority level equal or higher to the
interrupt priority level of the SVC Handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
In arch.h the extern "C" in the including context is left active during
include of target-specific mpu headers to avoid more complex
restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'recoverable' is a value passed by reference and we
should be dereferencing the pointer, to check if the
fault has been classified as recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since commit c535300539 ("drivers/timer: New ARM SysTick driver"),
_NanoIdleValGet and _NanoIdleValClear have been unused.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The current API was assuming too much, in that it expected that
arch-specific memory domain configuration is only maintained
in some global area, and updates to domains that are not currently
active have no effect.
This was true when all memory domain state was tracked in page
tables or MPU registers, but no longer works when arch-specific
memory management information is stored in thread-specific areas.
This is needed for: #13441#13074#15135
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ARM specific _impl_k_thread_abort function only applies to Cortex-M
so move it to the cortex_m specific directory.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
User mode is only allowed to induce oopses and stack check
failures via software-triggered system fatal exceptions. This
commit forces a kernel oops if any other fatal exception reason
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had a function that did this, but it was dead code.
Move to fatal.c and call from z_arm_fatal_error().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We introduce a new z_fatal_print() API and replace all
occurrences of exception handling code to use it.
This routes messages to the logging subsystem if enabled.
Otherwise, messages are sent to printk().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are standardizing to a arch-independent set of exception
reason codes, don't overload it with internal state of
the ARM fault handling code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_arm_do_syscall is executing in privileged mode. This implies
that we shall not be allowed to use the thread's default
unprivileged stack, (i.e push to or pop from it), to avoid any
possible stack corruptions.
Note that since we execute in PRIV mode and no MPU guard or
PSPLIM register is guarding the end of the default stack, we
won't be able to detect any stack overflows.
This commit implement the above change, by forcing
z_arm_do_syscall() to FIRST switch to privileged
stack and then do all the preparations to execute
the system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to correct the inline comment in swap_helper.S,
which is suggesting that system call attempts with
invalid syscall IDs (i.e. above the limit) do not force
the CPU to elevate privileges. This is in fact not true,
since the execution flow moves into valid syscall ID
handling.
In other words, all we do for system calls with invalid
ID numbers is to treat them as valid syscalls with the
K_SYSCALL_BAD ID value.
We fix the inline documentation to reflect the actual
execution flow.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
System call arguments are indexed from 1 to 6, so arg0
is corrected to arg1 in two occasions. In addition, the
ARM function for system calls is now called z_arm_do_syscall,
so we update the inline comment in __svc handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARMv8-M architecture supports the built-in stack overflow
detection mechanisms via the SPLIM registers. However, the
user might still wish to use the traditional MPU-based stack
overflow detection mechanism (for testing or other reasons).
We now allow the user to enable HW stack protection, but
manually turn off BUILTIN_STACK_GUARD option. This will force
the MPU_STACK_GUARD option to be selected.
It is still not allowed for the user to not select any stack
guard mechanisms, if HW_STACK_PROTECTION is selected.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the start of the guard to take into account the
configurable size of the guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Under FP shared registers mode (CONFIG_FP_SHARING=y),
a thread's user_options flag is checked during swap and
during stack fail check. Therefore, in k_float_disable()
we want to ensure that a thread won't be swapped-out with
K_FP_REGS flag cleared but still FP-active (CONTROL.FPCA
being not zero). To ensure that we temporarily disable
interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit reworks the ARM stack fail checking, under FP
Sharing registers mode, to account for the right width of
the MPU stack guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For threads that appear to be FP-capable (i.e. with K_FP_REGS
option flag set), we configure a wide MPU stack guard, if we
build with stack protection enabled (CONFIG_MPU_STACK_GUARD=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread (i.e. with K_FP_REGS option)
transitions into user mode, we want to allocate a wider
MPU stack guard region, to be able to successfully detect
overflows of the privilege stack during system calls. For
that we also need to re-adjust the .priv_stack_start pointer,
which denotes the start of the writable area of the privilege
stack buffer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread is created (i.e. with K_FP_REGS
option) we want to allocate a wider MPU stack guard region,
to be able to successfully detect stack overflows. For that
we also need to re-adjust the values that will be passed to
the thread's stack_info .start and .size parameters.
applicable) for a thread which intends to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Compilers (at least gcc and clang) already provide definitions to
create standard types and their range. For example, __INT16_TYPE__ is
normally defined as a short to be used with the int16_t typedef, and
__INT16_MAX__ is defined as 32767. So it makes sense to rely on them
rather than hardcoding our own, especially for the fast types where
the compiler itself knows what basic type is best.
Using compiler provided definitions makes even more sense when dealing
with 64-bit targets where some types such as intptr_t and size_t must
have a different size and range. Those definitions are then adjusted
by the compiler directly.
However there are two cases for which we should override those
definitions:
* The __INT32_TYPE__ definition on 32-bit targets vary between an int
and a long int depending on the architecture and configuration.
Notably, all compilers shipped with the Zephyr SDK, except for the
i586-zephyr-elfiamcu variant, define __INT32_TYPE__ to a long int.
Whereas, all Linux configurations for gcc, both 32-bit and 64-bit,
always define __INT32_TYPE__ as an int. Having variability here is
not welcome as pointers to a long int and to an int are not deemed
compatible by the compiler, and printing an int32_t defined with a
long using %d makes the compiler to complain, even if they're the
same size on 32-bit targets. Given that an int is always 32 bits
on all targets we might care about, and given that Zephyr hardcoded
int32_t to an int before, then we just redefine __INT32_TYPE__ and
derrivatives to an int to keep the peace in the code.
* The confusion also exists with __INTPTR_TYPE__. Looking again at the
Zephyr SDK, it is defined as an int, even even when __INT32_TYPE__ is
initially a long int. One notable exception is i586-zephyr-elf where
__INTPTR_TYPE__ is a long int even when using -m32. On 64-bit targets
this is always a long int. So let's redefine __INTPTR_TYPE__ to always
be a long int on Zephyr which simplifies the code, works for both
32-bit and 64-bit targets, and mimics what the Linux kernel does.
Only a few print format strings needed adjustment.
In those two cases, there is a safeguard to ensure the type we're
enforcing has the right size and fail the build otherwise.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit aligns the programming of the privileged stack MPU
guard with that of the default stack guard (i.e of supervisor
threads). In particular:
- the guard is programmed BELOW the address indicated in
arch.priv_stack_start; it is, therefore, similar to the
default guard that is programmed BELOW stack_info.start.
An ASSERT is added to confirm that the guard is programmed
inside the thread privilege stack area.
- the stack fail check is updated accordningly
- arch.priv_stack_start is adjusted in arch_userspace_enter(),
to make sure we account for a (possible) guard requirement,
that is, if building with CONFIG_MPU_STACK_GUARD=y.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-organizes the macro definitions in arch.h for
the ARM architecture. In particular, the commit:
- defines the minimum alignment requirement for thread stacks,
that is, excluding alignment requirement for (possible)
MPU stack guards.
- defines convenience macros for the MPU stack guard align and
size for threads using the FP services under Shared registers
mode (CONFIG_FP_SHARING=y). For that, a hidden Kconfig option
is defined in arch/arm/core/cortex_m/mpu/Kconfig.
- enforces stack alignment with a wide MPU stack guard (128
bytes) under CONFIG_FP_SHARING=y for the ARMv7-M architecture,
which requires start address alignment with power-of-two and
region size.
The commit does not change the amount of stack that is reserved
with K_THREAD_STACK_DEFINE; it only determines the stack buffer
alignment as explained above.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the architecture-specific implementation
of k_float_disable() for ARM and x86.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building without support for user mode (CONFIG_USERSPACE=n)
we need to correct the starting address of the MPU Guard, before
passing it to the function that evaluates whether a stack
corruption has occurred. The bug was introduced by commit
(60bae5de38) in
PR-13619, where the start address of the MPU guard was properly
corrected, but the guard start at the corresponding stack-fail
check was not adjusted accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ip register holds the stack_info.size (it is passed as argument
into z_arch_user_mode_enter(.)). We trust that the value of
stack_info.size contains the accurate size of the writable
stack buffer, above stack_info.start (as specified in kernel.h).
Therefore, we do not need to subtract any bytes for the MPU
stack guard. This allows us to clean-up one more occurrence of
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT in userspace.S.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
arm_core_mpu_enable() and arm_core_mpu_disable() functions are
effectively static functions, only used in the drivers for ARM
and NXP MPU, therefore, we do not need to expose them in the
arm_core_mpu_dev.h header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
arm_core_mpu_dev.h is an internal API, and is not supposed to
be directly called by kernel / application functions, therefore,
we can move it inside arch/arm/core/cortex_m/mpu directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Kconfig options:
- ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS
- ARM_ENTRY_VENEERS_LIB_NAME
Use these to link the veneers lib into the Non-Secure Firmware when
needed.
Also, make the path passed to the linker absolute to make it work with
makefiles.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Rename function _PlatformInit() to z_platform_init() to
comply with naming conventions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When in Sharing Floating Point Services mode we want to
dynamically save and restore the FP registers in thread
context switch, depending on whether the swapped-in and
swapped-out threads are currently using the FP registers.
This commit adds this functionality to the ARM context
switch mechanism. The logic consists of inspecting the
corresponding status flag (present in thread.arch.mode)
to decide whether to save or restore the FP registers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Only a single bit of the 4-byte internal (thread.arch) status
variable 'mode' is currently used, when we build with User mode
support (CONFIG_USERSPACE=y). In this commit we extend the usage
of 'mode' variable, adding an additional bit-flag to track the
status of the floating point context in a particular thread,
i.e. to track whether FP context is active or not. The status
bit is meant to be used in context-switch, to restore the FP
register context when required.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The initial carved stack frame only needs to contain the basic
stack frame (state context), because:
- under No/Unshared FP Services mode no FP context is stacked.
- under FP Sharing mode FP context is cleared upon thread
creation.
This commit removes the unnecessary stacking of the FP context
during thread initialization. This results in reduced stack
usage under the Shared FP Services mode (CONFIG_FP_SHARING=y).
Also, we do not need to initialize the FPSCR, because there is
no FP stack frame carved.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In FP Sharing mode we enable both automatic and lazy state
preservation of the FP context. This configuration improves
interrupt latency. Under this configuration the FP registers
will only be stacked when the thread is swapped out during
context-switch. Before jumping to main() we clear the FPCA
flag of the CONTROL register, so the FP context can be used
by the main thread.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The compiler generates errors of the form
error: "CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT" is not defined,
evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_IRQ_OFFLOAD" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_USERSPACE" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Make _get_num_regions() return a constant representing the
number of HW MPU regions, defined in DTS, if such define
is available. This removes the need of evaluating the
number of regions at run-time. The ASSERT in arm_mpu_init()
is expanded, to cover that case, where the number of
regions is taken from DTS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In z_NanoFatalErrorHandler() we want to print the name
of the thread that has faulted, when building with
CONFIG_THREAD_NAME. This commit adds this functionality
for the Arm architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With -O0 optimizion, gcc compiler doesn't inline "static inline"
marked function. So when function call return from function
set_and_switch_to_psp which is to switch sp from MSP to PSP, the
ending "mov sp, r7" instruction will overwrite the just updated
sp value(PSP) with the beginning stack pointer(should be MSP)
stored in r7 register, so the switch doesn't happen. And it causes
unpredictable problems in the initialization process, the backward
analysis for this problem can be found on Github issue #15794.
Fixes: #15794.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This commit fixes a build error, when building with
CONFIG_ARM_SECURE_FIRMWARE=y. The error was introduced
in #15930 (6f19d0), where we added internal structure
to the exception stack frame struct.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When compiling the kernel with CONFIG_SYS_CLOCK_TICKS_PER_SEC=0,
the CONFIG_SYS_CLOCK_EXISTS internal variable is unset.
This completely disables timer handling in the kernel, but a couple of
spots missed the required conditional compilation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ARM Cortex-M Exception Stack Frame (ESF) may consist of
several stack frame contexts (basic state context, additional
state context, FP context, etc.). To reflect these structural
properties, this commit re-factors the ESF, splitting out the
basic stack frame, holding the state context, into its own
struct container. The commit does not introduce behavioral
changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the activation of the FP context
in ARM system boot. There is no need to do this, since
the FP context will be activated in the presence of
floating point instructions. We update the reference
documentation accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not sharing the
FP context among different threads, so we do not need to
include the FP high registers bank in the thread.arch
container.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under unshared FP registers mode the FP register bank is
meant to be used by a single thread context. Therefore,
there is no need for automatic stacking of the FP register
bank at exception entries, or context switch, as the
registers are not expected to be shared among multiple
contexts.
Under unshared FP registers mode we only need to clear the
FPSCR register once, before jumping to main(). However, we
initialize the FPSCR already at boot in case FP operations
need to be performed during boot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARM builds with FP services (CONFIG_FLOAT=y) but without user
mode support (CONFIG_USERSPACE=n) we do not need and should not
enable full-access to the FP co-processor. Instead, we should
enabled access by privileged code only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the name of mem-domain API function to add a partition
so that it complies with the 'z_' prefix convention. Correct
the function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When performing thread context-switch it is not necessary to
have IRQs locked while saving the current thread's callee-saved
(and possibly floating point) registers. We only need to lock
the interrupts when accessing the thread ready queue cache.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the symbol CPU_HAS_SYSTICK to
CPU_CORTEX_M_HAS_SYSTICK, to look similar to all
other CPU_CORTEX_M_HAS_ options, and moves the
K-config symbol definition from arm/core/Kconfig to
arm/core/cortex_m/Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM SysTick timer is implemented by default in ARMv7-M
and Mainline ARMv8-M processors, so we include the
corresponding Kconfig symbol in arch/arm/core/cortex-M/Kconfig
and remove the selections from the Cortex-M SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nxp mpu uses the logical OR of access permissions when multiple
region descriptors apply to a given memory access. This means that we
must partition the sram into two non-overlapping regions to implement
the mpu stack guard. This partitioning gets reconfigured at every
context switch, and if an interrupt occurs during this time, it can
cause a fault because we do not have a valid mpu region descriptor for
the sram.
This scenario was observed on frdm_k64f in tests/posix/common before
commit 2895da02a4, which changed timing.
In this case, we couldn't even print fault information to the console
and the hardware would reset. It looked a lot like a watchdog reset,
unless you attached a debugger to see the fault.
A similar problem was fixed in commit
ec424b7a45, but this change temporarily
disabled the mpu.
Fix both cases by locking interrupts during the critical sections, as
this is more secure than disabling the mpu.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit initializes the thread.mode variable, right before
dropping thread privilege level to user mode. This is required,
as we need to know the privilege level of the thread, in case
we need to context-switch it -out and -in again (e.g. in case
an interrupt triggers a context-switch).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The arch.mode status flag is always inline with the actual
thread execution privilege leve. Therefore, we do not need
to be saving-off the thread's mode every time we intend to
context switch-out the thread.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit updates the thread.mode variable, in system
calls, whenever we modify the execution privilege level.
We need to do this, in order to be able to properly handle
context-switching triggered by ISRs, while doing the system
calls. The commit ensures that a context-switch, triggered
by an ISR during or after,a system call will preserve the
right privilege level.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
MISRA defines a serie of essential types, boolean, signed/unsigned
integers, float, ... and operations must respect these essential types.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
BIT macro uses an unsigned int avoiding implementation-defined behavior
when shifting signed types.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This adds a compiler option -fno-inline for code coverage on
architectures which supports doing code coverage. This also
modifies the ALWAYS_INLINE macro to not do any inlining. This
needs to be done so code coverage can count the number of
executions to the correct lines.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Field stack_info.size is supposed to hold the actual writable
thread stack area, above what is pointed to by stack_info.start.
Therefore, in all MPU architectures we can program the Thread
Stack MPU region as starting from thread->stack_obj and with
size equal to stack_info.size plus the (possible) difference
between stack_obj and stack_info.start.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Consider a stack buffer at address 0x10000 with size 1024.
If a thread is created with this stack object, the resulting
fields in thread.stack_info ended up being a base address of
0x10020 with size 1024. The guard size needed to be subtracted
from the size in order for the bounds to be correct.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
FPU's control and status register (FPCSR) for a thread is not
initialized. Random values are written to this register and this leads
to failure on fp_sharing test.
FPCSR register is set to 0 according to the value of FPDSCR.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Fix the type of struct field index to int, to avoid
loss of precision, in case the variable holds the value
-EINVAL (in the case of errors in MPU configuration).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In arm_core_mpu_mem_partition_config_update() we must fix the
index value of the start of the for loop, to address the case
when dynamic MPU regions are programmed in index values lower
than static_regions_num. (This might occur in ARMv8-M MPU,
depending on the order of programming the map of the
dynamic regions in run-time). We introduce function
_get_dyn_region_min_index(), and provide the implementation in
arm_mpu_v8_internal.h and arm_mpu_v7_internal.h (trivial).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In this commit we fix the implementation of internal function
_mpu_buffer_validate(), so it can work in the presence of a
security attribution unit (SAU, or IDAU). The fast validation
based on the CMSE address range check intrinsic is performed
first: if it fails, then a second, MPU-only check is performed
for ARMV8-M platforms that have TEE capabilities (i.e. SAU/IDAU
units).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
