We don't currently build on qemu_xtensa because completion is missing.
Seems like we have some dependency issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes#6577.
Wait for all ongoing transmits to complete before de-asserting CS.
When doing a tx then rx, wait for the previous tx to complete before
flushing the rx buffer.
Tested on the Arduino Zero against a Olimex MOD-NRF24L module.
Signed-off-by: Michael Hope <mlhx@google.com>
stm32l0xx_ll_spi.h causes compile warnings about aliasing.
Solution for F0 works here as well.
Tested on STM32L073RZ with 16-bit transfers.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
We need to check the debug level to be INFO or higher, otherwise
the some of the variables in net app init.c will give unused
warning. Also the sys_log.h needs to be included _after_ we have
set the logging level, this is done by net_core.h so we should
not include the syslog header file here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If network based syslog backend is enabled in Kconfig file,
then syslog messages are sent to external system using UDP.
See RFC 5424 and RFC 5426 for details about the syslog protocol.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample application implements a web service that provides
zephyr console over websocket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add console driver that allows console session to be transferred
over a websocket connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests websocket by creating a websocket support http server
and sending data to it and verifying the returned data is the same.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a http(s) server that supports also websocket.
It sends back any data sent to it over a websocket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DCCM_SIZE is defined in terms of K, not bytes, so we need to adjust
it from bytes (generated from dts) to K (used by e CONFIG_DCCM_SIZE).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We should be able to run the script without requiring a zephyr,flash
property in the choosen node. Qualify insert based on having the
choosen property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Refactor recvfrom code for handling SOCK_DGRAM into zsock_recv_dgram
to align with SOCK_STREAM. Add flags parameter, will be used later.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
With usb_device support added to nrf52840_pca10056 board, sanity
check script compiles the sample net/wpanusb and it fails with
undefined reference for symbol cc2520_configure_gpios.
First of all cc2520 shouldn't be compiled at all for nrf52840
since it has its own ieee802154 radio. The prj.conf under the
sample samples/net/wpanusb simply hard codes the config
CONFIG_IEEE802154_CC2520=y and is causing the ieee80211_cc2520.c
file to be compiled. If it's removed from the configuration file
we get other errors. So it is not straight forward.
For now, as a workaround, exclude the nrf52840_pca10056 platform
until there's a proper fix.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
* Add USB device controller driver for nRF52840 SoC.
* Supports only Bulk and Interrupt endpoints for now.
* ISO endpoint support is WIP.
What's tested:
* BTUSB - LE Scanning and connection.
Known issues in btusb tests:
* Observed momentary delays during LE scanning. This is possibly
due to hci_usb's way of calling the usb_write().
* Sometimes, when LE scan stop command is issued, response is not
sent and as a result USB stops functioning. This is also related
to the way btusb is handling the write(). For some reason, the
btusb class handler seems to issue another data packet write before
the USB control transaction is complete.
Miscellaneous:
* Lots of TODO items to discuss and fix.
Origin: Original
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
nRF52840 USBD requires power events to start USB enumeration.
Add APIs to enable/disable the power events, read the USB VBUS detect
and output power ready statuses which can then be used by the USB driver
in the enumeration sequence.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
According to a conversation with @carlescufi and @finikorg, the
zephyr codebase should only use the Linux Foundation USB vendor
ID. The USB vendor IDs and product IDs in the board definitions
are an obsolete leftover from old code and no longer needed.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
After introducing of Virtual File System Switch (#6318)
it i required to mount file system in order to use it.
This patch add to the example code which mounts NFFS
file system in the example.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
After porting the rand driver to drivers/entropy, replace the usage of
the old, Buetooth-specific driver with the generic entropy one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The rand driver present in the BLE Link Layer is able to provide
entropy for both threads and ISRs, and so it is more suited to be used
as a generic nRF5x entropy driver instead of the current one. This will
allow applications and the Link Layer to use the same driver without
duplicating it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
STM32Cube doesn't provide a USB LL API for STM32L0XX series.
This patch removes stm32l0xx_ll_usb.c from CMakeLists because
it doesn't exist.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In order to avoid confusion between "Unicode", UTF8, UTF16, UTF32,
and endianess of these encodings, rename all instances of "Unicode"
in the USB subsystem and samples into "UTF16LE".
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Make it possible to change USB manufacturer, product and
serial number strings by forcing prompt in the kconfig files.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Move the dts.fixup back to board dir in prep for support mps2_an521.
The memory maps between the two mps2_an385 and mps2_an521 differ greatly
so its easier to just keep the fixup files with the board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kconfiglib does not support UTF-8 properly yet, so avoid issues by
removing the UTF-8 character from the name until this is fixed.
See https://github.com/ulfalizer/Kconfiglib/pull/41
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A new build test for gpio drivers is added to build_all testcase.yaml.
The gpio_sx1509 driver is enabled in the .conf file and dts.fixup macros
are added for the driver.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Adds a driver for SX1509B I2C GPIO chip. This driver only supports the
basic GPIO features and does not currently implement the LED driver and
keypad matrix features.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
This commit introduces the ARM_SECURE_FIRMWARE k-option,
which indicates that we are building an ARM Secure application.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the SecureFault
handling for ARMv8-M-based Cortex-M33. The implementation is
compiled conditionally with compile-time directive
CONFIG_ARM_SECURE_FIRMWARE, which is to signify the intention to
build a Secure image on ARMv8-M with Security Extensions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add initial support for NUCLEO-L073RZ board.
This is a typical Nucleo-64 board, so most files are reused
from already supported Nucleo boards with small changes.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Add initial support for STM32L073xZ SOC which is not very different
from already supported STM32L072xZ.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
