Add a macro to get and cast the ICMP protocol header.
Change-Id: Ief3f69d1b3dbe9dd55bc0a032b3506c8e0370563
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some API functions that check IP addresses were not documented
properly.
Change-Id: I0e7361447db55037888c62ada6b55e3cf5f410f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the net_if.c compiles correctly when IPv6 and IPv4
are activated in config file.
Change-Id: Icaeba2c2ac7003ffaba516afd476991bf150165d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more functions to get proper IPv6 address from
a given network interface.
Change-Id: I5aecdb35eb549a0781949134ab4821dcb8ce9e7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to assign IPv4 addresses to a network interface.
Change-Id: I77be4ed5eb0231eb12b4ad47cb6076c8f4238124
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The caller is able to add and lookup network interface IPv6
addresses.
Change-Id: I7f43e18bd1fa69c7dcd2f6b46ad33043c28b92e9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 utility functions that check if a given IPv6 address
belongs to one of host network interfaces, and whether
the address is a given type.
Change-Id: If251534ae0af41963d45e305e7ba505a940d2fdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the source address is multicast, then drop the IPv6 packet.
Change-Id: Ibe733161d67f047469a25a5955c41c335e472945
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv6 packet and call a handler
function to process it.
Change-Id: I1226729685ae2a805128b587e2a37e0016d53ecc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect network statistics if CONFIG_NET_STATISTICS is
defined.
Change-Id: Id217daa3e19142c95396dc391ba2dc4123b18b22
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently all received packets are dropped as this is just
the initial patch enabling the receive support.
Change-Id: Ib06735f498a80edb8c9f7c5ec6f536a5ac1d362a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is now Kconfig option to enable net_if debugging.
Also use NET_DBG() instead of directly calling syslog macros
so that we can print fiber id automatically.
Change-Id: I150d363006e4be358c38308a93771ba444b0835e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of directly calling printk/printf, the network printing
macros will use syslog macros defined in sys_log.h
Change-Id: I3f12f81557f50b24ca47a43f345162f9ffbd574c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send() function is called from IP stack and it is used
when the network packet needs to be send via a specific
network interface.
Change-Id: Id6ce86b1748915fee73b62366dee13fcb7cf11a1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The native stack uses CONFIG_NET_IPV4 to compile IPv4 support.
Change-Id: Ia4a579591d6d2050e168c35e68546281043d53a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will return the network interface that has some specific
link address.
Change-Id: Iaebcf6e769d4f91f3cda6d3a0779324f89603b54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User does not need to call net_init() as it is automatically
called when system is brought up.
Change-Id: I2cb10f4402088a0ca4feff226b65341f337194ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The native stack uses CONFIG_NET_IPV6 to compile IPv6 support.
Change-Id: I25c3b2d6775ed610fca43960a569ddab0ec470aa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This macro can be used to check stack usage. It should only
be used when debugging is activated.
Change-Id: I99fe6f9db1f3e955152a91f3a18d031126172cfd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_IF_INIT() macro used parameter pasting incorrectly.
Change-Id: I40a988ffb06ce135731cd69f18931b7507cd71cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SLIP driver is using UART pipe driver to communicate with
host when Zephyr is running in Qemu. Currently this is only
used by networking sub-system when testing the networking
stack.
Change-Id: I432b4136670766a7fc190f146057924c266f9bea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save 12 bytes per IP address if IPv4 is active and IPv6 is not.
Change-Id: Ia01d2feb83e6ba80b2775f9eed3065c956932632
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network drivers should call this when new data has been
received from network.
Change-Id: Ife78fa0683b8c410c38358300a6a18e9325f0ef8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packets to be sent are placed to correct fifo that
is allocated to certain network interface.
Change-Id: Idd5eded42758c5bed2c18769122c38d9d03dc419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used by the new network stack to relate a device to actual
network context, and used in the different layers (mac, ip ...).
Change-Id: I30c08fa975314544c36b71636fd9653d562891b3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use CONFIG_NET_... prefix for Kconfig options.
Change-Id: I3e882845e7c09ba910f108179208fcaf33360f21
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a placeholder that compiles but does nothing else.
Change-Id: I9689fa26eb13bc23d29940938f7b3c11f32b2ff1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
getenv() returns an string of unknown size, so Coverity warns that it
might be used to overflow the stack in the call chain off
conf_read_simple().
To avoid that, wisdom says copy to an string of known size and pass
that.
Change-Id: I9e468de0ae66429062027f58fe0a0a4e1197218f
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
(cherry picked from commit 0307d6ea5fa361abe5c9fb1872f9dc8256208ee0)
Certain structures and defines in this file are from
from mbed's implementation. The file header is updated
as per this.
Change-Id: I688917cdd17cfc8b27d5b78181ced90df73c9efd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
The current ARC GCC compiler used in Zephyr SDK v0.8.2 generates
incorrect code when using the "-fno-omit-frame-pointer" option. This bug
should have been fixed in the 2016.03 release of the compiler.
Jira: ZEP-1243, ZEP-1403
Change-Id: I0901f55973c1ea37491b07bf625d0d1918803f3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>