When using the LE Create Connection Cancel command, the controller is
supposed to return a Command Complete first and then an LE Connection
Complete Event after. Since the Link Layer does not generate an event in
this case emulate the behavior in the HCI layer instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
According to STM32-E407.pdf (Revision I, June 2017), CON1 RST is
connected to processor pin #25, not #23.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
The comment was obsolete; we simply do not allow use of the FPU or
vector math in ISRs. There is no desire to add such support, doing
this is properly offloaded to a worker thread.
Fixes#5283.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The root cause for this issue was found in
https://github.com/zephyrproject-rtos/zephyr/issues/6470
so this kconfig isn't needed anymore.
This is a partial reversion of 6eef2f14. The actual feature is left
in place, as it's plausibly useful in other contexts (otherwise
assertions enabled by sanitycheck can't be disabled by the app as
they're passed in via CFLAGS).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was a little embarassing. The swap code got this right, and the
interrupt exit path got it right, but on entry we weren't ever saving
the shift and loop registers for the interrupted context.
This almost always worked anyway as the loop registers aren't ever
used in any Zephyr code (gcc won't generate this style of loop AFAICT)
and the SAR shift amount register is generally used only in two pairs
of adjacent instructions making the chance of hitting that exact cycle
quite low in general.
But of course we have shift-happy crypto code in our tests, so this
got caught, thankfully.
See https://github.com/zephyrproject-rtos/zephyr/issues/6470
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added details on new ARM boards, removal of panther board support on
x86 and arc, and dts.fixup changes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Note that the I2C driver is now operational and there's a new driver
for the PWM LED controller.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The kernel.fatal.stack_protection was filtering on
ARCH_HAS_STACK_PROTECTION and that should be
CONFIG_ARCH_HAS_STACK_PROTECTION
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix Coverity "Memory - corruptions (ARRAY_VS_SINGLETON)"
issue by type casting word_to_write to u8_t pointer and
adding a length check before memcpy operation.
Coverity CID: 182779
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
When reconnecting the code will attempt to recover the subscriptions
but it was not setting any callback causing the bt_att_req.func to be
NULL.
Fixes#5982
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MPU_STACK_GUARD option has a direct dependence on ARM_CORE_MPU.
Therefore, it is not required to have a conditional selection
of the option (if ARM_CORE_MPU) in ARM_STACK_PROTECTION.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This check is needed to not send command that is not supported
by controller. LE Set Privacy Mode command was introduced in
Bluetooth 5.0 so that it will fail on older controllers.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add a test to verify that k_sleep() can be used to put
the calling thread to sleep for a specified number of
ticks during system initialization.
This test is inspired from legacy test_early_sleep test
from v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
ESP-IDF commit cb31222e added the dependency on a file named
"sdkconfig.h", which is equivalent to "autoconf.h" generated by kbuild
used in Zephyr. It does not depend on anything from that file, though,
so just provide an empty file to keep the compiler from complaining.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
When returning into a different thread than we interrupted, we
obviously need to spill all the existing register windows to make sure
all their values are in the old thread's stack. But the code to do
this forgot to reset the current stack pointer to the value it had at
interrupt time (it was still pointing to the saved context below
that), so the caller of the interrupted function was spilling to the
wrong spot.
This wouldn't show up as an instant failure, it would only happen when
switching BACK to the improperly-spilled thread. And even then it
would be a noop if the original interrupt handler was deep enough to
have spilled that function naturally.
In practice, this happened only in some instances on ESP-32 (which has
more windowed registers than qemu) when interrupting the idle thread
(which is very shallow) with a (very simple) timer interrupt. Trivial
to see, hard to find.
See https://github.com/zephyrproject-rtos/zephyr/issues/6346 for more
detail.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
_sem_give_non_preemptible is non preemptible and no need to move thread
to ready queue for any real use case. Remove old code. This is also
not public API
Signed-off-by: Punit Vara <punit.vara@intel.com>
Not all boards are going to have the ccs811 on them, and thus not in the
device tree. We need a dts.fixup stub to dummy out the CONFIG_CCS811_*
defines that the driver expects.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The arithmetic performed on the CO2 and VOC measurements is pointless as
the units of the sensor already match those of the API, furthermore the
multiplication will overflow the u32_t with CO2 or VOC readings greater
than 4294 ppm or ppb. This CO2 concentration is achievable by breathing
at the sensor.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
The arm qemu platform has limitiations as we get into more complicated
features like userspace support. Add one hardware platform to catch
issues in sanitycheck for development of such features.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A condition is added to the Kconfig file to disable config options which
will be supplied from the dts.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Commit 08de658eb ("kernel: mem_domain: Check for overlapping regions
when considering W^X") introduced some compile issues on various
platforms.
The k_mem_partition_attr_t member is attr not attrs. Also, fix an issue
where sane_partition_domain neesd a pointer to a parition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Include and describe all the highlights in the 1.11 release, listed in
the major features initial section and described in the different
subsections in more detail.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update the home page to add a choice for the 1.11 docs and update the
release notes page to add the 1.11 release notes link.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
