The TinyCBOR library is a small Concise Binary Object
Representation (CBOR) encoder and decoder library, optimized for
very fast operation with very small footprint.
Origin: TinyCBOR
License: MIT
URL: https://github.com/intel/tinycbor
Version: 0.5.0-beta1
commit: 497066ee87dd54341adaa1195bf15ad11ee33b20
Purpose: Introduction of TinyCBOR
Maintained-by: External
Signed-off-by: Vipul Rahane <vipulrahane@apache.org>
Also pull out the SERCOM pads configuration to defines. Note that the
SAM0 has a two level configuration - a signal (like TX) is mapped to a
pad, and then a pad is mapped to a function on a pin.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit updates the title and the description of the
ARMv6-M, ARMv7-M NVIC dts bindings, so that both the title
and the description reference the respective ARM architecture
and not the Cortex M cores.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines the Kconfig options for
ARM Cortex-M23 and Cortex-M33 CPUs. It also
udpates the generic memory map for M23 and M33
implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This PR includes the required changes in order to support
conditional compilation for Armv8-M architecture. Two
variants of the Armv8-M architecture are defined:
- the Armv8-M Baseline (backwards compatible with ARMv6-M),
- the Armv8-M Mainline (backwards compatible with ARMv7-M).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nucleo_f413zh was missing some files to support flash with
openocd. Fix this lack and update doc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
nucleo_f412zg was missing some files to support flash with
openocd. Fix this lack and update doc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The toplevel CMakeLists.txt file is a core build system file akin to
the files in cmake/* and whoever is codeowner for cmake/* should also
be code owner for this file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix return value to -EBUSY instead of 0 when releasing a
reference but not physically turning off the clock.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With current value of IPV6 Multicast address, IPV6 mcast bind
does not succeed and IPSP use case could not work.
Change use case multicast address to match IPV6 address and
enable binding
fixes: #6050
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This package is not needed for building on fedora and currently causes
dependency issue with the fedora package manager, so remove it.
Fixes#6013
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Disable compilation warnings for altera_avalon_i2c.c as it is not
maintained in Zephyr.
Cmake does not allow us to use set_source_files_properties on
source files directly, these files need to be linked to either
a target executable or a target library. Due to the above reason,
altera_avalon_i2c CMakeLists.txt creates a library and links the
source file to the zephyr library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add test application for Nios-II i2c core on Altera MAX10 board.
This test uses ADV7513 HDMI I2C slave module on Altera MAX10
board to perform i2c read and write operations. For more details
on ADV7513 HDMI module, please refer to the following link.
https://ez.analog.com/docs/DOC-1986
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add I2C Master driver for Nios-II I2C soft IP core.
This driver relies upon the Altera HAL I2C driver for all the bus level
transactions, interrupt handling and register programming.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add wrapper or helper functions for Altera HAL runtime API's to
enable Altera HAL drivers on Zephyr.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing version of crc16_ccitt() is actually CRC-16/AUG-CCITT and
gives different results to Linux, Contiki, and the CRC unit in the
SAM0 SOC. This version matches Linux.
Note that this is an incompatible API change.
Signed-off-by: Michael Hope <mlhx@google.com>
Elevate prominence of some items buried in the services list that are
significant changes introduced in the last few releases.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Just some exclusions to coverage in code which cannot be
reached, or can only be reached in error conditions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added support in tests/kernel/tickless for ARCH_POSIX
and enabled this test for this architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test can also be run in ARCH_POSIX
+
added a filter in the test yaml so it does not float fault
with too low HW frequencies
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
If the systick period is < 5ms the clock testcase will
stall.
Added a note to warn whoever hits it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added possibility to reconfigure CONFIG_SYS_CLOCK_TICKS_PER_SEC
for the native_posix board (before it could only be 100)
+
Fixed tickless idle support
+
Minor fixes in irq wrapping
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Due to a security advisory released on February 1st 2018[1], it's
advisable to update mbedTLS to 2.7.0.
The vulnerability, identified as CVE-2018-0488 and CVE-2018-0487, risk
remote code execution when truncated HMAC is enabled or when verifying
RSASSA-PSS signatures.
[1] https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2018-01Fixes: #6025
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
to_read is the minimum value between I2C_ESP32_BUFFER_SIZE
and (msg.len - 1) rather than the maximum value.
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
When I2C Master writes to slave on CMD_Controller, opcode WRITE
was set twice instead of 1 WRITE at the beginning of the
transmission.
And when Master reads from slave, on CMD_Controller,
byte_num = 1 + data_lenght instead of byte_num = 1 at the
beginning of the transmission.
Note that is for 7 bits addresses, to 10 bit adressess is added
more 1 in byte_num as can be seen in the code above this fix.
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Since PINMUX_INPUT_ENABLED == 1 and PINMUX_OUTPUT_ENABLED == 0,
we can not set a gpio port as input and output at the same time,
So we always set the gpio as input. Thus, the gpio can be used on
I2C drivers for example.
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
MinnowBoard has an uppercase "B" in its name. Also added a link to the
config option mentioned.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The introduction of device tree support sensors need to update the
dts.fixup file in build_all to make sure that we still build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Michael Hope
