Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are not declared in dts/bindings/arm/nxp,kinetis-sim.yaml and do
not generate any output.
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A minor spelling fix in an inline comment in
both nRF9160 Secure and Non-Secure .dtsi headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changes to MEC1501 HAL for eSPI changed loop constant used by SoC
code initializing the ECIA registers. Fixed by using HAL constants
that are invariant.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This commit fixes following issues in printf formatting used by flash
drivers:
- cast values of type off_t to long to remove warnings generated when
compiling with Newlib.
- use 'z' modifier (as in "%zu") to print values of type size_t
- prefix all hex numbers with '0x'
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Split a long line remaining in the driver.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Allow the user to use software slave select instead of the
hardware pin, in order to free the related GPIO and avoid
unwanted SS triggering on the hardware pin. The default SS
is still the hardware pin.
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The sdhc_cmd_r1_raw() function doesn't take into account the existence
of commands with data response. Because of this, some datas were being
lost.
The commands that return a r1 response and a data are: SDHC_SEND_CSD,
SDHC_SEND_CID, SDHC_READ_SINGLE_BLOCK, SDHC_READ_MULTIPLE_BLOCK,
SDHC_WRITE_BLOCK, SDHC_WRITE_MULTIPLE_BLOCK.
In order to solve this, was juts necessary skip the byte discard when
the command is one of these.
This problem was affecting, for example, the sdhc initialization. The
token returned from SDHC_SEND_CSD was being lost and the initialization
was broken.
Fixes#15444.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fixes#16739. Changed the STM32's SPI MISO/MOSI configurations in order
to reduce the power consumption by approximately 20uA per pin.
According to STM32's Application Notes on GPIO configuration for
low-power consumption, the input pins should be configured with internal
pull-up or pull-down resistor. If a pin is configured as a floating
input, and there is no signal present, the Schmitt trigger randomly
toggles between the logical levels induced by the external noise, thus
increasing the consumption.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Apparently, settings were relying on other headers
including kernel.h, once that include got removed from the
logger header samples fail to compile.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleaning up log.h include dependencies to allow log.h including in base
headers (e.g. kernel.h).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the logic in a corner case, when the target comparator value is
one cycle ahead of the counter value.
Experiments have shown, that `set_comparator(cyc + 1);` might be not
enough in that case, and we still may (rarely) miss the interrupt.
This could happen when the counter incremented its value after the `dt`
variable was set. As we should set the comparator value two cycles
ahead to be on the safe side, increment the target comparator value
by 2 instead of 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `next_timeout()` function used to call the `elapsed()` function
directly in the `MAX` macro call. This caused the `elapsed()` function
to be executed twice, with possible different results, if the system
clock incremented its value in a meantime.
As a result, the whole `MAX(0, to->dticks - elapsed()` expresion could
return an incorrect value of -1, which represents the K_FOREVER timeout.
This led to a stall in devices running tickless kernel (as observed on
nRF52840).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These are not declared in any binding and do not generate any output.
Trying to get rid of properties that appear on device tree nodes but
aren't declared in bindings.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we are doing a nightly build we can utilize a large (over 50G) of
disk space just to generate the list of tests to build. We need to
optimize this so as we finish building the initial pass we clean up
as we go and only keep around the files we need (like .config,
generated_dts_board.conf, CMakeCache.txt, etc).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the following dtc warning:
mimxrt1064_evk.dts.pre.tmp:78.31-85.5: Warning (spi_bus_bridge):
/soc/flexspi1@402a4000: node name for SPI buses should be 'spi'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several aliases were added to nrf9160[ns].dtsi files solely for
the purpose of getting base addresses of certain hardware modules
via DT_ macros generated for these aliases.
Since for one-instance modules the same can be now achieved with
standard DT_INST_0_* macros, there is no need to keep these aliases.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that strcspn() is implemented in our minimal libc, remove it from
the civetweb sample to avoid the linker complaining about multiple
definitions.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
pinmux: Add the relevant definition of the spi3 pin
dts: Fix a bug, spi3 does not have a label
soc: Supplement spi3 related definition
Signed-off-by: Findlay Feng <i@fengch.me>
Z_MPOOL_LVLS() expands into the sum of 16 _MPOOL_HAVE_LVL() instances,
and _MPOOL_BITS_SIZE() expands into the sum of 16 Z_MPOOL_LVLS()
instances. In the end, a single _MPOOL_BITS_SIZE() expands to 256
_MPOOL_HAVE_LVL() instances!
Let's make it slightly easier on the compiler, and easier for humans
too, by reworking Z_MPOOL_HAVE_LVL(() so that ic can be used directly
into Z_MPOOL_LBIT_BYTES(), making the code logic much simpler.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
ARC nSIM simulates pretty much any modern ARC core,
moreover it emulates a lot of different core features so
it is possible to play with them even wo real hardware.
Thus we add yet another ARC core family to be used on simulated
nSIM board.
For now it's just a basic configuration with ARC UART for
smoke-testing of Zephyr on ARC HS CPUs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This will give us a possibility to check unaligned read/write support
in simulation.
Note nSIM with S(ecure)EM (with secure option) doesn't support that
mode in HW.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
ARCv2 cores may access data not aligned by the data size boundary.
I.e. read entire 32-bit word from address 0x1.
This feature is configurable for ARC EM cores excluding those with
secure shield 2+2 mode. When it's available in hardware it's required
to enable that feature in run-time as well setting status32.AD bit.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
KFLAG instruction might affect multiple flags in STATUS32 register
and so when we need just AE-bit to be reset we need first read current
state of STATUS32, then change our bit and set STATUS32 again.
Otherwise critical flags including stack checking, unaligned access etc
will be dropped for good.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Up until now only ARC EM family has been supported in Zephyr
which don't support atomic operations other than
compare-and-excange, so custom atomic ops with load-locked(LLOCK)/
store-conditional(SCOND) were never used that's how we never
realised CONFIG_ATOMIC_OPERATIONS_CUSTOM points to the wrong file:
"atomic.c" while real implementation is in "atomic.S".
Fix that now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
These functions are useful for determining prefixes, as with file system
paths. They are required by littlefs.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for virtual UART device that uses Segger RTT channels
for data transfers. Due to the RTT principle, this driver supports
only polling API.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
k_cycle_get_32() returns an unsigned 32-bit integer, while the '%d'
specifier denotes a signed integer.
Using the proper C99 format specifier resolves the problem.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Musca B1 has 2 x 2MB embedded flash memories (eFlash). The flash
memories are connected to the AHB Master Expansion “Code Interface”.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The call to bt_conn_security will send a SMP security request for
peripheral, and for central it will initiate LL encryption.
A call to bt_conn_security with no IO capabilities but authenticated
keys has been distributed, would succeed on central side, but fail on
peripheral side with error code -22.
The keys could have been either:
- Preprogrammed
- IO capabilities may have changed.
- OOB bonding may been used.
Fix so that Peripheral can send a security request if the bond
information is already established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This property is only declared in bindings/spi/nordic,nrf-spis.yaml ('s'
for 'slave'), not in bindings/spi/nordic,nrf-spi.yaml.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add the link between the i2c and the arduino connector,
here i2c5.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>
I2C5 are used by arduino connector.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>
The i2c5 instance are used on arduino connector of
stm32mp157c-dk2.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>
Add support of I2C. Add I2C5 configuration for the
arduino connector support.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@linaro.org>