The drivers provide _sys_clock_cycle_get(): moving the public APIs to
the drivers allow them to be aliases of it.
Change-Id: Ic5975a048f2b51f94510f0c3cd5e6ab3a8907718
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix the option that enables level triggered interrupts usage.
It depends on CONFIG_HPET_TIMER_LEVEL_HIGH and CONFIG_HPET_TIMER_LEVEL_LOW
configuration parameters.
Change-Id: I3529b1e57b1625e6f0f4b05d9c15eb563e9c4f83
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The initialization procedures need to be called in the
following order:
- basic hardware initialization;
- devices initialization;
- hardware clock initialization, that the kernel needs to
run the kernel server.
This way, the board initialization routines is placed
to the pure_early_init level to make sure it runs first,
all device initialization procedures run at pure_init level,
so they are initialized early enough to be used for debugging
if needed. Hardware clock initialization is placed on
nano_early_init level to make sure hardware clock is initialized
just before the kernel server starts.
Change-Id: Ieecf9f0252c47c621b7208969687dc1113fc2ad0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC and IOAPIC macros from board.h as they are no longer
appropriate since Kconfig options exist to use in their stead.
Change-Id: I2ce41a7a08d1859682389f35cd5a97c0e2cd5bf7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Creating the LOAPIC timer Kconfig options permits future commits to remove
those settings from the relevant board.h files.
NOTE: No defconfig files have been modified as the LOAPIC_TIMER configuration
option is not enabled in any of them.
Change-Id: I7d97ed089cd4b734566b698183be95d3a166d71f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a copy-paste error that inadvertently had the LOAPIC timer being
referred to as the PIT.
Change-Id: I4760d150cd6feb76b7d7384845898c6276bace83
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds additional Kconfig options to the HPET timer for setting its base address,
IRQ, IRQ priority and condition for triggering an interrupt.
Change-Id: I80349c60237380129da9ef41ccf6850c6b874c3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All driver Makefiles are adding the same cflags and they
have been done inconsistenly, make all drivers inherit
from the top level Makefile and remove unused includes.
Change-Id: Ie66d0ba7a418ac26f7eb709f50c887dc682e935c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The name of the device is SYSTICK. The device name should be part of the
file name, like all other timer drivers we support. The name
'cortex_m_timer' said nothing about which device the driver is for, since
it's way too generic: it could be for any timer present on any Cortex-M
board.
Change-Id: I39b4f79c32516ec9aff82c55c0ca639fad1b52bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: Ifb17f98bc12d3a28198810351629a109abdc18a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Qemu implements HPET so that it is connected to IRQ 2, which makes
necessary to use it in legacy emulation mode.
Add legacy emulation mode to HPET driver.
Change the way the HPET driver is initialized. QEMU requires that
the mode (one shot or periodic) gets set prior loading comparator
value.
Add debugging mode to HPET driver to ease the next port.
Change-Id: I668325d5968451585519a08b6c41863cf6e37f88
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Fixes the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option dependencies such that
it can be overridden by a modified platform configuration file. This is
particularly important for the LOAPIC timer driver as
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the target's CPU/bus frequency.
Change-Id: I0fb49b4c540888cb1988c76e2a711a85e756f82c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the timer driver dependencies to simplify the selection of a timer
driver. The timer driver menu only lists those drivers that are compatible
with the previously selected interrupt controller.
Change-Id: I5deea315f7c373c6660bacc411c6374e7b0ae84d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The LOAPIC_TIMER_FREQ Kconfig option is not used.
Change-Id: I919fd2128f667e0b91467cb542041449738dd992
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update microkernel systems to use the new driver initialization model on the
timer driver.
Change-Id: Ida9ef2a395d0dddf4104d490d78b13b11ea3c347
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update nanokernel systems to use the new driver initialization model on the
timer driver.
Change-Id: I22d8619f56052f094482d73ab34c9d610492d8c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Prepares the _sys_clock_driver_init() routine to interface with the new driver
model. To this end, it must accept a pointer to a device structure and return
an integer.
Change-Id: I3c600ce1efb49c0864aae7b09663ca40d6289372
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The revised name conforms to Zephyr OS naming conventions.
Change-Id: I5bcdaf1df7da9d8ce5787a08b29ead91dd8f24ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing the parameter to timer_driver() as it is not used.
Change-Id: I09275287eeb541be0dd315056b4f2bc6cbc2573c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moves the Cortex-M timer driver so that it resides with the other timer
drivers.
Change-Id: I3324c53356efd9f5fd88752a98e4ae301ea38d47
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the Kconfig option for selecting the Cortex-M systick timer. This helps
pave the way for moving the Cortex-M systick timer into the drivers/ directory.
Change-Id: Iee040083a425c9c1dbc5973991b89239e0a72eee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The revised name better reflects the fact that the file defines
macros in addition to declaring variables. In addition, most of
these APIs use the "sys_clock_" prefix, which aligns well with
the new file name.
Change-Id: Ib33517d4b19ec2455303b87200c677e87640fcbc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to simplify x86 interrupt stub creation, each interrupt
controller implements an interrupt stub definition macro.
Add IRQ_CONNECT_STATIC() for static interrupt registration, and
construct the interrupt stubs name from device and interrupt
handler names.
Add IRQ_CONFIG() macro for the interrupt controller configuration.
On x86 platform it programs APIC to associate an IRQ number with
the interupt vector.
Add HPET_TIMER0_INT_PRI parameter to Quark platform header to
make it build correctly.
Change-Id: I24ad25e1aa807ffa63733a27ad882877fcad72af
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the system generator pre-registers K_ticker as the handler
for the system tick event, there is no need for the timer driver
to re-register it at run time.
Change-Id: I7f20c19e5c6ccc7dfb6117aa2d2647b9dec0e549
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the
name is simply removed, as it isn't necessary.
Change-Id: I32f9e7390e436aec008a9454b72657e129d65152
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of places where there is no need to include these files
at all, or places where these files are being indirectly included
due to the inclusion of nanokernel.h.
Change-Id: I7b58148af454b977830c00a6b519a78d0595603b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Closing comments to two CONFIG_MICROKERNEL ifdef blocks incorrectly identified
the ifdef block as NOT belonging to the microkernel.
Change-Id: Iee415e33d7f8a88c41009c5783b37da3a431461b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit standardize the Kconfig inclusion.
Selective sourcing of Kconfig files create conflict when merging
different configuration files (.config files).
Instead, now each kconfig symbols is dependant of its specific
DRV_* driver ksymbol.
Change-Id: I3d20d108a83f00d34067dc334758fd57e51feecf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes an issue with the inclusion path for the
board.h file for the pentium BSP.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I28172f8071b907aa61660ec8b8009e83cb2aa5ea
This commit adds the Makefiles that describe the object-bundles
for the drivers directory and every subdirectory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id77cff9cf0ab51827acc2aef32cbed3ec3ad586b
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
Replace duplicate code and will allow for further cleanup by possibly
consolidating micro/nano code that is currently guarded by preprocessor
conditionals.
Change-Id: I9aa9966c581244646b6ea317ef8b51fef9054dd4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The correct call is nano_isr_lifo_put, but they are aliases of each
other, so that never caused an issue at runtime.
Change-Id: Ibec8e6d3377133e5e67589c5a3ad1b8fb3cc652c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ib426dad55e318bb8176c4e7660711db1484cc245
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I6098649b507dae09d4d0f19e712bc0fe3686dfc0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ie0770bd9ff872a9ed2b567baca1514d15fe6c90a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1f95ae3c2fd44ae3bd366cd33208551cf5ea6d10
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5681dc0c33cc42ee48270eab418c99cc923f96b1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id7391e40bb709f03c58f552d6b783cad834bbdcc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I28cbf0d02600d31548393870e712e6da062048da
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic28658f68d473b3a163fe5d97f611bfd572f140e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I31e267c1479dfaeeb0fba8c6ba0da45a3c011c0f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I80ccb884f1ffd8f3740cd9298787462485b08024
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
In order to have a better compiler support consolidate
inline assembler code in a set of header files.
If another compiler is used, that supports a different
inline assembler format, asm_inline_<compiler name>.h
heder files have to be provided.
Change-Id: Iecc7d96419efd767a8463933badd4db4a557de5b
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4e5c9419fe0ccbc4b2990b96fc95c697decc18e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e249e34ee9666666e31db6b9f71fe2abcc22400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2e501394b7fa4264d9854659e2dd008e5c94b540
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iebefec0e02cbb838564dd71fd4424c1adbff31f5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
