ENC28J60 has numbers on the board. Documentation has information about
signals only. Wiring will be easy with pin numbers.
Change-Id: I0afd6058a9417b679ef6358304737bf256aa3522
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong pool pointer was used when printing pool information during
the unref in nbuf.c. During nbuf init, wrong pool pointer was used
when printing memory pool sizes.
Change-Id: I9ed08cf7afa3c841c97ea981b97fff37aa40a984
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parameter "timeout" is set in net_context_connect(), the
assumption by the user is that the function would wait for SYNACK
to be received before returning to the caller.
Currently this is not the case. The timeout parameter is handed
off to net_l2_offload_ip_connect() if CONFIG_NET_L2_OFFLOAD_IP is
defined but never handled in a normal call.
To implement the timeout, let's use a semaphore to wait for
tcp_synack_received() to get a SYNACK before returning from
net_context_connect().
Change-Id: I7565550ed5545e6410b2d99c429367c1fb539970
Signed-off-by: Michael Scott <michael.scott@linaro.org>
net_context is used for more than just TCP contexts. However,
the accept_cb field is only used for TCP. Let's move it from
the generic net_context structure to the TCP specific net_tcp
structure.
Change-Id: If923c7aba1355cf5f91c07a7e7e469d385c7c365
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The recv_data_wait field in struct net_context is described as a "Mutex"
when in fact it's a semaphore signal.
Change-Id: I3bef8d1a07ceb3da5894ae4cdc8f1fe3c61c5dbe
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When SYNACK is received we dont hand off the netbuf to anything
which will call net_nbuf_unref, so let's not mark it NET_OK.
Instead let the code path fall through to mark it NET_DROP.
Change-Id: I1f883e1a13c53c930bf50c07ff701e3db6f02d8a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the TCP_FIN block is after a potential packet_received()
tcp->send_ack should be appropriately set to the last sequence
processed.
In the case of a TCP_FIN buffer, we should advance it by 1 or else
the destination will continue to retry to send the last block.
Change-Id: I9c97d35a87ad6cc1a50f928b237780bff4cd2877
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Since we default to a return value of NET_DROP, we
can remove the automatic NET_DROP in the TCP_FIN block.
The return value will be set to NET_OK by packet_received()
if appropriate data is found which needs to be sent to
the callback.
Change-Id: Ib2634ba34440ca7053a4e98bf80f12cf6fbbd361
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Buffers marked TCP_FIN may still have data attached to them
which needs to be processed and handed back to the callback.
Let's move the TCP_FIN handling to after the data processing
section now that we have a copy of the TCP flags to do this.
Change-Id: I90f53b10e393024ebffebe1837b8866764b8a7ac
Signed-off-by: Michael Scott <michael.scott@linaro.org>
buffer TCP flags can be cleared during packet_received so let's
save a copy of them for later.
Change-Id: I401e99c1ed2723dac4e86da58635b548a5645c13
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Allow building the IP stack with newlib by enabling linux extensions.
Jira: ZEP-1592
Change-Id: I6714b73c7666a6f56c5203e2754ce1d7d94af0f1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If TCP is not enabled, then compile out the TCP retransmit
list variable that is part of net_buf struct.
Change-Id: I07e188454d9be76ac93fe96405f00a89b967668a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These logs are mandatory to spot buffer leaks. Unfortunately, they are
still not detailed enough to spot the actual place where the leak
happen.
Change-Id: If36dfa7a54aa1546fb268301f369b5ecd046e276
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf() will not
output anything without it.
Change-Id: I8013e4efa5cb760215316e9413734281fb576f4d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case of a GET request do not error if there's no payload or queries
parameters.
Change-Id: I29b2225700c83a8a2dad166146288dd55bd8f3de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource verify the capability of the server to send a response to
a POST including a Location-Query option.
Change-Id: I4b663e813eb713d7e93a3c2f8cfd58c335b24cde
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The CoAP test suite expects a specific path included in the
Location-Path option in the response.
Change-Id: Ib7616f9ad318fa93dc862f686429edb5084306e3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium tests expects that all GET responses include the
Content-Format information of the response. In our case, all responses
are of type plain-text.
Change-Id: I08844825f31ed8f4c54020a41b9172cef5da6d70
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
So the sample zoap server application is more conformant, include the
token from the request, if any, in the response.
Change-Id: I5aacc1a3f81ebeaf473d327163c952b829489b01
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium test suite considers an error responding a NON_CON
request with a ACK response, even if the spec says it is valid, so add
support for using the correct type of response according to the
request.
Change-Id: I211c8a135b8db83af442a1d645b7ea0826dbbdec
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
In some situations, for example, when the remote side sends a RESET
message indicating that it is no longer interested in observing a
resource, it is helpful to have a way to obtain the obverser
representation.
Change-Id: Ifbf627f9170be844fd525c557dda8cb722ac7aff
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving options that represent an integer, the order of the
bytes being considered was inverted, resulting in invalid values being
returned.
Change-Id: I8ba84f77e3402066632c0ba650939266c87a8ea2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For example, when a RESET packet is passed to zoap_handle_request(),
there's nothing it can do, and it's not an error, so it returns
success silently.
Change-Id: I025bb44733521d6132999c219aaa292a3de302d7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This allows to verify that the CoAP server is able to handle a
blockwise PUT request.
Change-Id: I801e353a27b10a5266748591d023bcb607db6bb4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This status is used when a blockwise transfer should continue with the
next block.
Change-Id: If68c32aea8c0b63efcd929cdff57f0ff235b2792
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds support for TD_COAP_BLOCK_01 and TD_COAP_BLOCK_02 tests,
which test that the CoAP server is able to handle GET requests with
blockwise tranfers.
Change-Id: Id0d1703adcf5d4e76dd1bc489c8bcc94a3fd90bc
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource is used to verify that the CoAP server is able to send
responses in two steps: 1. only acknowledge that the request was
received and is going to be handled; 2. The actual response, with the
payload.
Change-Id: Ia77cc0ee9805e6cc120c57f4598c68ad364882a0
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When parser encouter DHCPV4_OPTIONS_END, it immediately returns NET_OK.
No need to maintain end variable here.
Coverity-CID: 157584
Change-Id: I4c8b91f37ae882845c280dab1a8204966aaac00a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Pointer udp will be NULL when (!(CIPHC[0] & NET_6LO_IPHC_NH_1))
condition is true.
Coverity-CID: 157588
Change-Id: I8aa1eb2e4d4aee8039631d76ad0ecc345247d6b5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When contex information provided and DAC bit is not set and vice versa
are invalid cases.
Coverity-CID: 157569
Change-Id: I1b798703cbbb6155a7bdf734d0fcde9ce48c409c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In net_nbuf_get(), check that context pointer value is not
null before accessing data via it.
Coverity-CID: 157600
Change-Id: I7e7ea19a85f6fbef129e9ce699ea740d3be84cb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor is not found, then ignore the timeout.
Coverity-CID: 157583
Change-Id: Ia2199970bd862e43901f5717025271c11c74af5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to allocate separate fragment to store the IP
protocol headers.
Coverity-CID: 157582
Change-Id: Ib0dd5d28cd6876a0cf2de3b063c030ef64da998c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Callback cannot be null so no need to check its value.
Coverity-CID: 157572
Change-Id: I26e4b24c41d30aa9007b78895975035e6bf8807f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The context parameter might be NULL so we need to check
its value before accessing its content.
Coverity-CID: 157571
Change-Id: I7f75323d9d261a77421688f37a40bb44ff3ca2bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The link layer dereferences a buffer right after it is transmitted.
If this extra reference is not held, the second time a buffer is
retransmitted, the reference that TCP holds when keeping the buffer in
the `sent_list` will be taken, and retransmission won't happen reliably
anymore.
As soon as the TCP fragment is acknowledged by the peer, the
`sent_list` reference is taken, and the buffer is freed.
Change-Id: Ie50f9acf02c1dff74248a5dfbec3785a91ff90f7
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
No more than 4 bits are necessary to store the state of a TCP connection,
so better pack it using bitfields so that it uses only 4 bits instead of
32, by sharing space with `retry_timeout_shift` and `flags` fields.
There are 12 (or 14, if you count the 2 unused bits in the `flags`
field) bits remaining in the same dword, but I don't know what to to
stuff there yet.
This also changes all direct field access for the `state` field to
function calls. These functions are provided as `static inline`
functions and they perform only casts, so there's no function call
overhead.
Change-Id: I0197462caa0b71b287c0773ec5cd2dd4101a4766
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This frees up some more memory as well, by computing the maximum segment
size whenever needed. A flag is set in the TCP context to signal if
the value has been already computed.
Change-Id: Idb228d4682540f92b269e3878fcee45cbc28038a
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This value is never set (always zero), so it's safe to remove it from
the net_tcp struct.
Change-Id: Ie4c1d90204a9834f2223b09828af42ee101bd045
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rename the variable to `retry_timeout_shift`, and shift-right the value
each time there's a timeout. This saves some memory in that structure
by using the holes left due to alignment.
Change-Id: I18f45d00ecc434a588758a8d331921db902f4419
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Cancel all delayed work timers: FIN, ACK, and retry timers. Also, do
that unconditionally regardless of which state the machine is in, as
that's a no-op if the timer has not been started yet.
Change-Id: Ia36b97c6823943976447fbd6389ae04862c19ff9
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The rationale for removing fragments while sending them is to free the
memory they're using as soon as possible. This worked fine because
most protocols implemented initially did not require any
retransmission, so the upper layers were never holding an extra
reference to the buffer (& their fragments).
This is not the case anymore, as the TCP layer holds a reference to
a buffer (& fragments) while confirmation from the peer has not been
received, allowing retransmission.
With this change, the fragments of a buffer are not removed when being
sent by the SLIP layer; however, the buffer is still deferenced when the
transmission is complete. If nothing else holds a reference, all the
fragments are returned to their respective pools, like before.
Change-Id: I74966d72f6970b66f526ea0b765101077c843de2
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
DHCPv4 sample was running on main stack. Updated to run on its own
thread. Update config options (removed unnecessary ones and separated
few options for easy readability).
Change-Id: I3be38ca4cd4bcfa62e2613b90b104679cff2517e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch removes legacy configuation variables found at the
prj_arduino_101.conf file of the DNS sample application.
Change-Id: I74e370a7be177f809d805525cc18f594a59e38c0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
