Make sure that both the TX and RX threads are running before
we turn the network interface up.
Change-Id: Ie7e5938403e90e1ae76047c221cf9fd2f5a1167b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The current state of affairs will not allow to set a MAC address and
thus will initialize a random MAC address.
However, when we are in a situation where we are trying to interface
Zephyr OS QEMU VMs with physical targets for testing, this is not
practical. We need to create a macvtap interface, on which we need to
set the MAC address of the Zephyr OS SLIP device so packets can be
routed. There is no way to guess which random address is going to be
used, and there is no practical way to query it.
So this patch adds a CONFIG_SLIP_MAC_ADDR config
setting. slip_iface_init() is changed to take the code from
slip_get_mac() for initializing the MAC address (which should be
happening there anyway) and if CONFIG_SLIP_MAC_ADDR is set, it takes
that one -- otherwise goes to generate a random one.
Change-Id: I55a68f2743604f310d41c934783eca82084d7e94
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Use the proper MAC address space (00-00-5E-00-53-xx) dedicated
for documentation and specified in RFC 7042 ch 2.1.2.
Change-Id: If8ef9e4ee4e041ad005060664ebafe60df0a6bf9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test net_mgmt_event_wait() and net_mgmt_event_wait_on_iface()
Change-Id: I82ba70a697f0d13aa2e1eef2110e139b3621c119
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case of callback based event listener, it is easy for the callback to
filter on the given interface. But in case of the synchronous call it's
not: it would need, after a failed comparison on the interface pointer
to loop by itself on the net_mgmt_event_wait() which is a little bit
heavy (reinstalling the event listener, with the semaphore and all) and
a bit of a burden for the caller itself.
Instead, net_mgmt provides a dedicated call
net_mgmt_event_wait_on_iface() which does it the right way, so the
callback and the related semaphore are destroyed if only the iface
matches the one given as parameter (besides the timeout obviously).
Change-Id: Iab05c3249586f4f4d0447eea42fdac72b8428f2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not enough to know just network address and port number to
disambiguate an endpoint, protocol (TCP vs UDP, etc.) should be
known too. Without this patch, there is a confusing output from
e.g. echo_server if both TCP and UDP is enabled.
Jira: ZEP-1086
Change-Id: I247a2dfc87df634ceac3b8733d7349b1d6aca80c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This function is useful for logging in other parts of network stack,
so allow to reuse it. (Will be used for net_context logging in a
follow-up patch).
Change-Id: I8238874584f8f039c94e5d827265944d97d13f6b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
NET_IF_UP may change during the lifetime of k_pool which means we would
have to reconfigure everytime the flag changes but NET_IF_UP is already
checked during net_if_send_data thus it should never reach the queue in
the first place making this check unnecessary.
Jira: ZEP-1888
Change-Id: Iaa8471bee886a6f7e701a1dd243fb199def26589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Unref the buffer if net_contect_send_to() fails to send.
Change-Id: I182125e64aabd171cd86f42fd9e1de036dd68544
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current finalize api's takes buf as input parameter and returns
the finalized buf. But if there are any issue while finalizing,
it failed to throw an error.
Change-Id: I6db54b7453eec41a8051fab50d5c0dc937debd54
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When IPv6 header contains extra header (e.g. HBH), extra header length
was not part of app data length calculation. Result applications get
invalid total length. Also simplified set_appdata_values().
Change-Id: I07438d62dfd0f9abc1452484deb8b5eacdc37cf1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for adding IPv6 extra header (HBH) with RPL options
in ICMPv6 echo reply.
Change-Id: Ibd0b96362a7d5a5f668a18d6a33e6917d37dc51c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC 6775 4.2, context length holds number of leading bits
in the Context Prefix field that are valid. Rest are not valid
for compression.
Change-Id: Id21cc2d7a5d42980cf9295f85e75c4869ff6cb99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a nodes receive a packet with RPL option in IPv6 HBH, it's need
to be reverted with node flags, instance id and sender rank.
Change-Id: Ic49c8e84c7846dc02728c120078506f6d7411e52
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL extension header verify function takes input parameter as
metadata 'buf' and start reading from it. Instead it should start
reading from fragment (buf->frags). Also API should return
fragment and offset where caller can continue reading it.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10efdda31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Make sure the neighbor cache is printed nicely in table
format with columns aligned.
Change-Id: I5323fdc644317ea08fd4694215f8cd44f8d7ff74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds some routines to evaluate DNS responses as specified
by RFC 1035.
Jira: ZEP-1876
Change-Id: Ia78a1175229962128a0bcee985e507d72ed26aea
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use dns_answer_type instead of dns_response_type to reflect that
the routine refers to the DNS answer RR.
Change-Id: I6d01add4a1b090b83a0708326a52b7bb945c8d23
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
LLVM/icx compiler gives some warnings for signed vs unsigned
pointers.
Jira: ZEP-1884
Change-Id: Ide57be898ebd1bff49c8a27aac392fa58dcae726
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_byte_to_hex() prototype first parameter was uint8_t *,
but it should have been char *.
Jira: ZEP-1885
Change-Id: I6132a67bb9e8199de88451fb4e446081f401e8f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not handle NUD (Neighbor Unreachability Detection)
properly and did not go to DELAY state when neighbor
reachability was checked.
Change-Id: I127d25124aa806c44ff37c1355cc3db7fb25b2d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print timer information when creating and expiring the
reachability timer.
Change-Id: I5c8fee91de85fe7c9ea7c467f45dbb105250d5b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send_ns timer was used instead of reachable timer when
the reachability timer was expired. This meant that the
reachability timer was never restarted after it expired once.
Change-Id: Iccbd6d019d1106adca60f7319bc4c547cdb1d924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print the neighbor pointer address and remaining time when
viewing the neighbor cache in "net nbr" command.
Change-Id: I13840ccc16c31c99a803ec1b7afe69879bd639f2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper API to get the remaining time in prefix timer
and return the value in seconds as expected.
Change-Id: I055ce0ba6092c23ad60d6775ce75a0a67ad91d26
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to verify that the neighbor is reachable, send
neighbor solicitation message to neighbor which should then
send neighbor advertisement to us so that we can then mark
it reachable.
Change-Id: I2c45ee4a6982c698ef6c8fa1acccb995aadf8ee6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be able to debug IPv6 neighbor state changes,
pretty print the state names when setting the new state.
Change-Id: I64e0b4173eaa63c9715c17420a008602759aa4fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To be used by net-shell and other files for debugging neighbor
state.
Change-Id: Ie9b09a54a05dcb066906a3697dfe38aeffc886e6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds the HTTP Basic Authentication routine "http_auth".
Authentication parameters are defined in the config.h file.
The README file is also updated by this patch.
Jira: ZEP-1543
Change-Id: I2d531966290e87a68c54fc1ac834491ac937df22
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The "null terminator" for the chunked transfer encoding must be
added only if the payload is present.
Change-Id: Id325a660f060b3a3468bcca16a079def11b8c3ef
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set a local define with the value previously defined at the Kconfig
file.
Change-Id: I3ee424c4a1102ca00c0059cb9d0a86498806486f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using a more efficent entropy call and proper output data
Jira: ZEP-1878
Change-Id: Ife738b84c1e56d58784b4fbc61ec0843579c4453
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Only the IRQ prasing was using cell_prefix and cell_string does the same
thing so lets just use that everywhere.
Change-Id: I2ef9b1e2c1baef54b71d811c835b29a9ca8fe81b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This builds the zephyr OS image with the proper flash offsets for
slot 0.
After building, the image needs to be signed using the zep2newt.py
script included in the MCUBoot repo:
./scripts/zep2newt.py --vtoff 0x200 --word-size 4 --sig RSA \
--key root-rsa-2048.pem --bin <path to zephyr.bin> \
--out <path to zephyr.bin>
And then run 'make flash'.
Change-Id: I4739c0b7912c8066882208cb450a8224d433965b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Fix path to pinmux.c
- Fix note markup
- s/TTY-to-USB/TTL-to-USB/ ; s/adaptor/adapter/
- Recommend 3.3V TTL serial cable
- Consistent use of "Flyswatter2" official spelling
- s/UART0/UART1/
- Provide CONFIG_ARC_INIT relevant value
- s/for for/for/
- Consistent naming of JTAG 2x5 male pins as "micro JTAG header"
- s/orange/green/
- The Arduino 101 micro JTAG header connects to the Flyswatter2
via the ARM Micro JTAG Connector
- Consistent case
- $USERNAME is not set on Ubuntu, $LOGNAME is POSIX-compliant
- su requires root password, 'sudo su' only requires user password
- Exit root session when done creating udev rule
- Note: code-block above should be rewritten using 'sudo tee'
- s/X86/x86/
- Fix paths to i586-zephyr-elfiamcu-gdb and arc-zephyr-elf-gdb
- samples/hello_world does not set CONFIG_ARC_INIT=y, so suggest
using tests/booting/stub instead
- s/debugserver/debug server/
- s/BLUETOOTH_DEBUG_STDOUT/BLUETOOTH_DEBUG_LOG/
- s/bottle neck/bottleneck/
Change-Id: I4a76020f67d9672f59eae52f78c5caeb9e513aee
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Explain how to create the udev rules granting access to the
Arduino 101 board in DFU mode.
Explain the available methods to flash the Arduino 101 board:
either manually with dfu-util command line,
or automated with ZEPHYR_FLASH_OVER_DFU=y and 'make flash'.
Provide instructions for x86, ARC and BLE cores, using distinct
code-blocks for the manual and make-assisted methods.
Change-Id: I0f9fe3849dec3c2dc2249b77d31d4f2414c98331
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Let 'make flash' invoke the dfuutil.sh support script, and
export the relevant DFUUTIL_* environment variables, for all
3 cores of the Arduino 101 board: x86, ARC and BLE.
This is backward compatible with the current usage of OpenOCD
over JTAG, since this is only enabled when the environment
variable ZEPHYR_FLASH_OVER_DFU is set to y.
Change-Id: Ic5528cb87a180378d7120d150c27d1e24c9ebe75
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Flashing the Arduino 101 board over DFU can be tricky: the
dfu-util command line is cumbersome, and the reset button
must be pressed at the right time.
This script brings the convenience of 'make flash' for the
Arduino 101 board and for other boards that support the DFU
protocol. It checks whether the board is in DFU mode, and
prompts the user to reset it when needed.
The dfu-util command line is constructed from the following
environment variables, to be exported from the Makefile:
- DFUUTIL: path to the dfu-util executable, default: dfu-util
- DFUUTIL_PID: vendor_ID:product_ID of the board in DFU mode
- DFUUTIL_ALT: alternate setting name of the DFU interface
- DFUUTIL_IMG: path to the binary image sent to the board
Change-Id: Ia9577ec96102a92d4c60481f980f30f4f6e7cd9e
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Since we recommend using dfu-util to flash the Arduino 101 board,
it should be mentioned in the list of packages to be installed.
Also fix indentation.
Change-Id: Iafc053c1b07e79bd7d02059b46a842c25ebaaf64
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
