This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add two new test cases to exercise the code in monitor.c.
Change-Id: I66ae70e0d3b61d3b852916333019e1ed2c5c6cf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not only SECONDARY, but also the following ones:
- NANOKERNEL
- MICROKERNEL
- APPLICATION
Change-Id: Id41fa572c830727166101fa3c6254398857b31c7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable building pinmux drivers to catch build breakage.
Origin: Original
Change-Id: I86ec02423bf23ee6aca41b9413e240e984313fcf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Exclude STM32F103RB platform from the test. The SRAM is overflown by
>20kB, while the CPU itself has 20kB of SRAM.
Change-Id: Ic9aad6b88d517b62f4a18901cd698ba9a9defb40
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Disable the test for STM32 based platforms until an implementation of
timestamp counter becomes available.
Change-Id: I2e50dac36dbfdc61081610c0e0cf1ace8892f602
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Splits the test into two clear sub-categories: microkernel and nanokernel.
This is done to maintain consistency with other tests that do the same
(e.g. test_obj_tracing, test_sema, test_stackprot, test_timer).
Change-Id: Iddb1ec8d569a9d953fb8af5ce08e87b51995f821
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It will extensively test all provided functions within a normal usage of
the API.
Change-Id: I723203a29c3f3416b464030a7fe34eac5fff6095
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes line length and whitespace issues flagged by the checkpatch tool.
Change-Id: Id49cd5341571ac7893929a2836fe5e06166abe06
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test_context to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for
test-context.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: I219f63063ee2dca5b0326e25141d8b37f4cd1d74
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for task's stack.
This permits the test_pool to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for test-nano.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ib8041f6d91e8ffc5fcb16dc73de1f7662d9596da
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for stack (both fiber
and task). This permits test_sema and test_mutex to compile
on boards like nucleo-f103rb. Sanitycheck script passes all
tests for test_sema and test_mutex.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ie25288bbbbfa64bfc5f7463639bfb09639cc184f
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test_nano to compile on boards like
nucleo-f103rb and arduino 101 sss. Sanitycheck script passes
all test for test-fifo.
This patch was verified on the emulated platforms and not against
real hardware boards.
Change-Id: Icf30c4056d9f9ebdc82c100305bf761e49b64491
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test to compile on boards like
nucleo-f103rb and arduino 101 sss.
Sanitycheck script passes all test for test-lifo.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: I1dd514c9d273bcf490e0eb4f1fadee1a8a94bcc5
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
The extended inquiry response data format include at least two octets:
length and type, so adding NULL termination name shall be 240-2+1
octets.
Fixes accessing wrong memory in the statement below:
...
memcpy(name, &eir[2], sizeof(name) - 1);
...
Change-Id: I71be96aed6af63d0649f4d64271208eeb11e2c6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These tests were using non-portable NANO_CPU_INT_REGISTER. They
now use IRQ_CONNECT, which lets us run these tests on all arches
and not just x86.
Change-Id: Idd4264c2650c851aa78356f01586edbadd014501
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test verifies that a task_sleep() function can be used during the system
initialization, then it tests that when the k_server() starts, task_sleep()
call makes another task run.
For fibers, test that fiber_sleep() called during the system
initialization puts a fiber to sleep for the provided amount of ticks,
then check that fiber_sleep() called from a fiber running on the
fully functioning microkernel puts that fiber to sleep for the proiveded
amount of ticks.
Change-Id: Iec20b61d7e802a19b1ec074d2511345eed9f2407
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This function is not used outside of main.c.
Change-Id: Ia8cc6c2b2193906dd77d031b73d289c6acd128b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce RAM requirements of latency benchmarks by reducing the amount of
memory statically allocated for stacks (both fiber and task). This helps
reduce the memory usage required by microkernel test to below 20kB,
enabling the benchmark to be run on Nucleo-F103RB board. The change was
verified for nucleo_f103rb and qemu_x86 boards.
Change-Id: If5990d107f0fcfabd12ade82f97e7a1a13f8421c
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Remove x86 specific includes. Add Cortex-M specific instruction pipeline
flush helper. Microkernel benchmark has been verified to work on STM32
MINI A15 (STM32F103VET) board. Due to memory constraints, Nucleo-F103RB
can only run a nanokernel version of the benchmark.
Change-Id: I2e49c240d6985ceb5643551397d6e0a8cc65b3c6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
This allows to excersize different kconfig configurations in
single app. Thanks to this other samples don't have to get
extra extra options enabled just to improve test build coverage.
Change-Id: Ie5d261f3d38c60e227cf963d938b6fac6d0fb3b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test didn't work unless the specific board was noted in the Makefile.
This scales horribly. Assume no floating point / sse unless specifically
mentioned.
Change-Id: Id1eaa88cdf971a8843e2418661e6a8dba6a1b91d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to initiate BR/EDR connection with specified address.
Change-Id: I99f0d7dff29384926d3bf739831c7460a7fb5f68
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Rationale for defaulting to IAMCU variant is that our most
interesting x86 boards use this calling convention. --all
will test both.
Change-Id: Idaddfec51a74ae85691d348adeeb88a8528060ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit b1a0041de6.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I129b649f7010da90f52616f6fd63eec8b63f8247
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit f9d1d56153.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I4b21f926198af9f0703f042fc170226ed6ab4331
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the sanity test to integrate the kernel object tracing
API. The test implements the philosophers demo and adds
an additional test thread that uses the kernel object tracing
API and test for the correct output.
Change-Id: I2f01f7b3386afd4783ae58b5311eb7d6ee5a3cea
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Origin: Original
Test fails in CI, disabling until we have a resolution.
Change-Id: Ie8e1ca00b08238c2c2a4feefbe08140c762e6d2f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test verifies that a task_sleep() function can be used during the system
initialization, then it tests that when the k_server() starts, task_sleep()
call makes another task run.
For fibers, test that fiber_sleep() called during the system
initialization puts a fiber to sleep for the provided amount of ticks,
then check that fiber_sleep() called from a fiber running on the
fully functioning microkernel puts that fiber to sleep for the proiveded
amount of ticks.
Change-Id: Ibe20ca1ca966575aaaad0b6ffd66ca43512801f0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Clear subscription allowing to test subscribe / unsubscribe in
sequence.
Change-Id: Ife8b994410107f05c23687e3fb23b4a81cad8ce7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for get supported commands of l2cap service.
Change-Id: Ic3e2b6502c05a5784d1fd01af0e47cce11e6d2c9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds initial declaration of l2cap service in tester
application.
Change-Id: I9bd729bc351b2fe135e7b5b80262b45eaf70b10b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch makes adding attributes more clean.
Attribute UUID and user data are now added along with the attribute
in gatt_db_add function. Thanks to that, some static variables have
been deleted, and the code is more readable.
Change-Id: I510bd7a1a9ae0210dd90520212a340ee1a3b2b53
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GAP_CONNECT bit was missing in supported commands.
Change-Id: I9d009c55327ae67bed38c45b7c11fb67665e1cd0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes opcodes to be in the sequence.
Supported commmands is form now uint8_t array, so this resolves
the problem with endianess as well.
Change-Id: I602a58081948dbbf5e0d83cbb12a118a5990b9f8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The 'test_sleep' nanokernel project tests the following functionality:
1. Normal expiration of fiber_sleep()
2. Waking a sleeping fiber via fiber_fiber_wakeup()
3. Waking a sleeping fiber via isr_fiber_wakeup()
4. Waking a sleeping fiber via task_fiber_wakeup()
5. Normal expiration of task_sleep()
Change-Id: Ie51997ace9a4413f62d77daacd6dff97b6b3a4dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CCC user data is already available on the initialization
(struct bt_gatt_ccc_cfg and ccc_cfg_changed callback).
Change-Id: Id06c69b6da33f651bc049983179cd6fe3bc197d6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes a bit of redundant code.
gatt_buf_reserve can call gatt_buf_add with data set to NULL, to
reserve space on gatt_buf.
Change-Id: I533a515bbd022a07ba8e2bfb3cd07e1a9ff8878b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Defined BT_UUID for the header can be used instead of struct member.
Change-Id: I55ca069d04622450e4fbb1e3f7abf6fdef2f8f30
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no point having separate handlers for signed writes and
write without response commands because both call the same,
bt_gatt_write_without_response function.
Change-Id: Ib033ffb77e2123dd565e8f1119ef668253f810f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This splits Authorization permission to Read with Authorization
and Write with Authorization.
Some attribites may be readable with no authorizarion, but writable
with authorization defined by a higher layer specification or be
implementation specific (eg. Server Characteristic Configuration
Descriptor).
Change-Id: I341a7095c1e8db1dea92cdeebf76c5a2307a49a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Makes shell output readable by disabling extensive debug from UART
driver.
Change-Id: Ic8df252c8ca4abd6b021db11d266f4db80df4b09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use common config for tests and use testcase.ini for defining micro
and nano kernel variants.
Change-Id: I47453cd49696dd496cc728cc1eb2eba9cf7f1c6c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have spearate app for H5 testing as init test can
use multiple configuration targets.
Change-Id: I467b5939ae914e7c1ac22fdac24d8b0b6ed3f1cf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Combine both nano and micro tests and cleanup whitelisting
for the testcases to include all buildable boards.
Change-Id: I28d41b82fb60d75d4b172d9dd3ac7e71480053b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Manage this test using one testcase.ini for both nano and micro
kernel cases.
Change-Id: I9757299cdced17e7fcbfa1fbbbcf87693b48bf41
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Remove one level in the hierarchy.
Change-Id: I0924b5a40357b1a892f7ed3ecf512f617edc99a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I53dc387c15c6a6efc74f88c477015b2e422c5d6c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I72597e8253d027cd134dd58cc3051f21dce376d0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: Ia9f457db372729f403be24c7a502a896623db5b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
eliminate one directory level since we only have one kernel variant.
Change-Id: I7d7c31e7dc5b98ad8ea0ad9e17a05694ac89770a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All 'real' sample application now reside under samples/ directly.
the nano and micro variants will be under the specific sample directory
and not split across the file system.
Change-Id: I0ddf929cff7a29749aa4944b4385af058d9cc74c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the test case routines reside under tests.
Change-Id: Iea59a68e8b537954250d63923a88df267639e716
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move aio and i2c driver test cases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I28f24997f147dcd188973555df6024c44f3fb6e8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all kernel testcases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I130cc3919174e93b7130d55fb101bed1d5d7552d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
