Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix the error in thread rescheduling:
Fix Fast IRQ exit routine error when it reschedules threads if
(prio >= 0) || (sched_locked == 0) || (next_thread == _current),
while the correct condition for thread rescheduling is:
(prio >= 0) && (sched_locked == 0) && (next_thread != _current),
Fix regular IRQ error when the regular IRQ exit routine rescheduled
threads when (next_thread == _current) instead of
(next_thread != current).
Increased IDLE_STACK_SIZE for ARC architecture, to hold saved
registers.
Change-Id: I1d87a968e231e13822844b7564567e6ca310cde2
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
They were the same, standardize on the lowercase one.
Change-Id: I8bca080e45f3e0970697d4451e468b9081f96f5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some changes that went into k_idle.c were missing in idle.c
causing errors while building power management code for
unified kernel. Added the missing changes.
Tested with power_mgr app built for unified kernel.
Jira: ZEP-1139
Change-Id: I9fe005544f7ee69d3cb3ff10c649be28037fcf15
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adapting to unified kernel naming of 'coop thread'.
Change-Id: I66cb766c2269acf0867e434bc21f633ea1111f89
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Needed by the kernel event logger when it records a context switch.
The kernel event logger releases a semaphore when a new event is
available in the log so that a thread can consume the event. However,
giving that semaphore cannot add a context switch event itself in the
log or the logger would be caught in an infinite loop.
Change-Id: I571a4aa0d302775e09cdc2d654a6b61f8b2e42c7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Idle thread may need a bigger stack depending on extra work it has to
do, like power management or kernel event logging.
Change-Id: Iff691d7838036d602bad79799820b68ad55ad00f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Eliminates references to "fibers" and "tasks". Eliminates unnecessary
doxygen tags for internal routines. Miscellaneous other corrections
and improvements.
Change-Id: I0272fa477773c075799b67138bad5debcfd6b01e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Existing code wasn't removing a thread from the kernel's list
of active threads if the thread terminated or aborted. (It did
remove it if the delayed starting of a thread was cancelled.)
Change-Id: Icc97917e33765696480d0e9bf31e882ef555d095
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is needed because some thread termination paths can be
invoked with no guarantee that thread preemption won't happen.
(It also aligns with the approach taken by the thread monitoring
initialization code.)
Change-Id: I28a384e051775390eb047498cb23fed22910e4df
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renames _thread_exit() to _thread_monitoring_exit() to make
its purpose clearer. Revises the associated comments and
removes unnecessary doxygen tags.
Change-Id: I010a328d35d2d79d2a29b9d0b6c02097bb655989
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new kernel doesn't support the thread abort handler concept,
so only the legacy API for this capability is needed.
Change-Id: Ie809092e73b784504c3d298911d216bed8dd8993
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Fleshes out the prototype heap memory pool support
to make it fully operational. Noteworthy changes are
listed below:
Tweaks arguments to k_malloc() and k_free() to be more like
malloc() and free(). Similarly, modifies k_free() to take
no action when passed a NULL pointer.
Now stores the complete block descriptor at the start
of any block allocated from the heap memory pool. This
increases memory overhead by 4 bytes per block, but
streamlines the allocation and freeing algorithms. It also
ensures that the routines will work if the block descriptor
internals are changed in the future.
Now allows the heap memory pool to be defined using the
HEAP_MEM_POOL_SIZE configuration option. This will be the
official configuration approach in the unified kernel.
Also allows the heap memory pool to be defined using the
(undocumented) HEAP_SIZE entry in the MDEF. This is provided
for legacy reasons only.
Co-locates memory pool initialization code to keep the line
that causes memory pool initialization to be done during booting
right next to the routine that does the initialization.
Change-Id: Ifea9d88142fb434d4bea38bb1fcc4856a3853d8d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks k_work_q_start() so that it accepts its 3 configuration
settings directly, rather than forcing the caller to pass in a
configuration data structure.
Change-Id: Ic0bd1b94f1a1c8e0f8a84b3bd3677d59d0708734
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
PM control function is used only by the PM subsystem. Update
documentations to make it clear and name the relevant structures and
functions with _pm_ in the name.
Jira: ZEP-1044
Change-Id: I29e5b7690db34a228ed30a24a2e912e1360a0090
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Needed to resolve various undeclared symbols when SYS_POWER_MANAGEMENT
is enabled.
Jira: ZEP-1073
Change-Id: I21db2580efb15c80d84d9163fe9e8245d6dc0391
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the source code for ring buffers to the 'misc' area, since
it isn't really a central component of the kernel. (This also
aligns the ring buffer source code with its include file, which
is already under 'include/misc'.)
Change-Id: I765a383a05f51fa67d154446f412496e689f9702
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add 'legacy_' prefix, as per the revised naming convention.
Change-Id: I0eaff33a561523ad11621b3104862c574930556e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the unified kernel's build system doesn't properly handle
a file in the 'legacy' directory if it contains an initialization
function, some legacy code can't be located there. To avoid confusion,
the revised convention for legacy code is to keep any file that
contains only legacy code in the main kernel directory, and to give
it a "legacy_" prefix.
Change-Id: I019adc8f36611d4481bdcf31dde66597d4cf54ae
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ensures that all APIs which accept a timeout value wait for at least
the specified amount of time, and do not time out prematurely.
* The kernel now waits for the next system clock tick to occur before
the timeout interval is considered to have started. (That is, the only
way to ensure a delay of N tick intervals is to wait for N+1 ticks
to occur.)
* Gets rid of ticks -> milliseconds -> ticks conversion in task_sleep()
and fiber_sleep() legacy APIs, since this introduces rounding that
-- coupled with the previous change -- can alter the number of ticks
being requested during the sleep operation.
* Corrects work queue API that was incorrectly shown to use a delay
measured in ticks, rather than milliseconds.
Change-Id: I8b04467237b24fb0364c8f344d872457418c18da
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Now invokes any microkernel-level init functions used by
legacy applications.
Change-Id: I8f68ddba764f13d037a679b74121713983f4aaba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Tweak mailbox API parameters so that not only are their descriptions
correct, but their names match across header file and C file.
Change-Id: Ieeb3a40fb7c535a5eac2e06533d01d13aaf69181
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reverts a change that was made to the defragmentation routine
when memory pool support was ported from the microkernel to the
unified kernel.
The change was intended to improve the readability of the algorithm,
but introduced a subtle change in behavior. For example, when
k and i are zero and the number of block set entries is one
the original algorithm did not execute the while loop, while the
revised algorithm executed the loop once.
Change-Id: I2b0263a8d7b80846013c459847817d314f803457
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Build breaks when enabling CONFIG_NEWLIB_LIBC because it has its own
sched.h file.
This is a bad symptom of a greater issue: the build system passes many
'-I<path>' options to the compiler, and that allows including header
files by simply specifying their names (when located somewhere else than
<zephyr>/include/) and can cause clashes when several files in different
locations have the same name, like in this case.
Fixes ZEP-1062.
Change-Id: I81d1d69ee6669a609cd0c420b1b8f870d17dcb67
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Folds this API into k_stack_init() to provide a single API
that requires the caller to pass in the stack buffer, just
as is done for other kernel objects initialization APIs
involving the use of a buffer.
Change-Id: Icad5fd6e5387d634738d1574f8dfbc5421cd642d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Do not include timeout_q.h when !SYS_CLOCK_EXIST, this allows removing
_unpend_thread_timing_out() in that case.
Have _abort_thread_timeout() return 0 (success) when !SYS_CLOCK_EXIST.
With this change, the minimal footprint nanokernel project compiles for
the unified kernel.
Change-Id: Ifbf9167a82fb3ebcf6941bf3f85c105c23c9060c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It is always needed by the kernel, since the return codes are now
errnos. CONFIG_ERRNO is the mechanism for having a per-thread errno, not
using errno values.
Change-Id: I4ed14896a342f4122793d91b13c41b4a6a74716d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Timers are based off timeouts now, which can only be enabled when the
system clock is enabled. So the three are really just one setting now.
Keep the NANO_TIMERS and NANO_TIMEOUTS around for now until all
middleware that rely on them is updated. They are always enabled when
SYS_CLOCK_EXISTS is enabled.
Change-Id: Iaef1302ef9ad8fc5640542ab6d7304d67aafcfdc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
- ensure dummy thread's stack is aligned
- rename nano_init() to prepare_multithreading
- move _Swap() to main thread into its own function
Change-Id: I6c8dbe2a4e034f3db90b55d1a5e30bc73bac3d50
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename remaining functions to fit with kernel naming convention for
internal interfaces. Use struct k_thread instead of struct tcs.
Change-Id: I28cd7f6f4d7ddaeb825c8d2999242d8d2dd93f31
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Integrate _timeout_remove_tcs_from_wait_q() into
_unpend_thread_timing_out().
Change-Id: Id57d9fd8f9e877e580460091172aaabf451f3d4b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename _do_timeout_add to _add_timeout, rename _TIMEOUT_ADD to
_add_thread_timeout to better reflect their functionalities. Have the
latter call the former, remove _do_timeout_add and
_nano_timer_timeout_add.
Change-Id: Ica86bea10d99d72bf78379598a942d277e7002d0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename _do_timeout_abort to _abort_timeout, rename _timeout_abort to
_abort_thread_timeout to better reflect their functionalities. Have the
latter call the former, remove _do_timeout_abort and
_nano_timer_timeout_abort.
Change-Id: I0fea9474b19a2eb47a37489eb06c0d1d56886c9c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When adding a thread to the ready queue, it is often known at that time
if the thread added will be the next one to run or not. So, instead of
simply updating the ready queues and the bitmask, also cache what that
thread is, so that when the scheduler is invoked, it can simply fetch it
from there. This is only done if there is a thread in the cache, since
the way the cache is updated is by comparing the priorities of the
thread being added and the cached thread.
When a thread is removed from the ready queue, if it is currently the
cached thread, it is also removed from the cache. The cache is not
updated at this time, since this would be a preemptive fetching that
could be overriden before the newly cached thread would even be
scheduled in.
Finally, when a thread is scheduled in, it now becomes the cached thread
since the fact that it is running means that by definition it was the
next one to run.
Doing this can speed up considerably some context switch times,
especially when a thread is preempted by an interrupt and the same
thread is scheduled when the interrupt exits.
Change-Id: I6dc8391cfca566699bb9b217eafe6bc6a063c8bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When fetching the next thread to run, we know at least one thread is
available.
Change-Id: I568c33a61b6a0a6d6a7f79c337caecffd5ef70b6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
As the unified kernel should replace the nanokernel and microkernel
lets go ahead and move code shared between the nanonkernel and unified
kernel into the unified kernel.
Change-Id: I8931efa5d67025381d5d0d9563e7c6632cece87f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If you select the BOOT_BANNER on its own, nothing happens and
you are left to wonder what is going, it happens very early in
the boot process and requires very early console initialisation.
Change-Id: Id548491f7e3f7f399ddc572199ce39e6fc268ed4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure that kernel/unified, that is included in libs-y does not
built recursively through building kernel/ directory.
Make sure that any lib.a library is not included into libzephyr.a
and thus object modules from those lib.a files are linked only if a
function from that object module is referenced from the application.
Jira: ZEP-1025
Change-Id: Id3a3e96ca0b8abc9aedde0ffb9baa0164e380464
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Simplifies k_msgq_purge() at the expense of making the case of an
already empty message queue a little slower.
Change-Id: I8fafd6d49233efbf23b95d171f81bf795e828454
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds k_work_pending which can be use to check if a k_work is
pending execution.
Change-Id: Ifd56e8d65d555c7e9722c547fe83e13e886d63cd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds nano_work_pending which can be use to check if a nano_work
is pending execution.
Change-Id: Iae0492a750de93fcd7e89e3a2e74509ffce4983b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Obtained from device.h, which includes microkernel.h when building for a
microkernel system.
Caught by LLVM.
Change-Id: I98a00269b2b6cb38c851b176323de1228d65603d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Replaces it with a pointer as there is no need for an opaque memory
pool type.
Jira: ZEP-916
Change-Id: I5493eed25c9c34e1b850dc3b20699864edb22d28
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the following internal thread group APIs from the public
kernel.h header file to the more private thread.c source file as
they do not need to be public APIs.
_k_task_list_start[];
_k_task_list_end[];
_FOREACH_STATIC_THREAD()
is_in_any_group()
Change-Id: I0b731fb0c20a5574cb1b3c1397803af82918d69d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Currently passing a constant string (other than a string
literal) to device_get_binding() generates a spurious warning.
The warning is spurious because device_get_binding() does not,
nor is it ever likely to, modify its argument. To fix the
warning we modify the prototype to make clear name will never
be modified.
Change-Id: I2df22de61eb2580b2086a685549900d7ed4a322d
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Building kernel objects as a static library allows not
to include the initialization function for an object
type if this type is not used by the application.
It reduces memory footprint
Change-Id: I2b3c79cb2591fdd1ce15d27684c4a874e759c559
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The separate initialization priority provides more
flexibility when it's needed to arrange the initialization
sequence.
Change-Id: Ie1b7b48d282618f6d641320bf3b24f63716a7342
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Simple conversion from ticks for now.
Change-Id: Ib81fc738d45641a6a3a88d2adec1f3eb861f3f97
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no reason to check if the idle thread is a cooperative thread
before invoking k_yield(); it is safe to unconditionally invoke it every
iteration.
Rationale: If the idle thread is cooperative, k_yield() must be invoked
to allow a new thread to get scheduled to run. If the idle thread is
preemptive, then k_yield() effectively becomes a no-op.
Change-Id: Ide3204c92381640b5d12b39ca0f258d56d8cc3d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _nano_get_earliest_deadline() is still used by both
the microkernel and nanokernel.
Change-Id: I14501e6d41ca5faac27dead5873ef897e79831aa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following wait_q.h macros
_NANO_OBJECT_WAIT()
_TIMEOUT_UPDATE()
_TIMEOUT_TICK_GET()
Change-Id: I7cb78728aaad74acf7f121c79f03d32fa6af5aac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces _nano_get_earlist_deadline() with the more streamlined
routine _timeout_get_next_expiry().
Change-Id: Iee7ec727f0500cb28e37a364036fd40a483b40c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
For unified kernel the routine is implemented through
a wait queue.
Change-Id: Iceab7b821e3b55e0773ad780f4b9b0a1dfc21f5d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The routine _reschedule_threads() does not need to check that the
scheduler is locked as this is done as part of _must_switch_threads().
Change-Id: I701b811512836eef591b2adcd708991ec9324b3d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Most apps run fine with static k_timer objects. Don't pay the cost
for the timer pool if no one asks for it.
Also turn off the allocate/free API in the header if it can't possibly
work at runtime as it's an obviously-detectable error that would
otherwise be visible only at runtime.
Change-Id: I492e6e01c4213e3544f707247eea6e4bc601fefd
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The K_<obj>_DEFINE macros in the unified kernel create objects of name
'name', and not a pointer named 'name' to an object. Some macros
contained the code from early prototyping.
Change-Id: I7262570fbe0b267012874eac0185b4e0cd7f523d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Have one function that can be used for all possible device
purposes using a control code instead of the suspend
resume functions, makes it generic for device control.
Added device power states.
The older replaced APIs will be deprecated in a future patch
Jira: ZEP-954
Change-Id: I6dd3ebfd0fde3546b2d8397f19842f5758fda0c4
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Semaphore groups are enabled by default. Disabling them will both
decrease the footprint as well as improve the performance of the
k_sem_give() routine.
Change-Id: If6c1b0e2e1f71afd43e620f05f17068039d12b05
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _is_next_thread_current() checks if the current thread
is still the highest priority thread that is ready to run.
It is useful for determining if a thread must be swapped out when
timeslicing is in effect.
Change-Id: Ide7b89742a64f6082ca4c679a4b2fbd60792e30f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Added needed kconfig options. KERNEL_V2 selects MICROKERNEL to allow
middleware and application that differentiate between NANOKERNEL and
MICROKERNEL to run unmodified.
Build the unified/ kernel directory: do not touch the
nanokernel/microkernel directories.
Invoke sysgen for both microkernel and unified kernel. Only have sysgen
reference include/microkernel if building an original microkernel.
Change-Id: If74779146143434f7ee274bbef32d6c894b9f1a1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Easier to build logic for when an MDEF file is to be parsed since
unified kernel needs to do it as well. Can also be useful for testing,
when toggling between static and dynamic objects in the same test case.
Change-Id: I51eb8919e18443516ade13caab04698d37d91803
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These impede debugging and we have CONFIG_OMIT_FRAME_POINTER
now which does this globally for the entire kernel.
Change-Id: I46939223e27dd298ca3ed162ff5790cb2e9ed2a2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Initialization code in nano_init.c gated by the config parameter
CONFIG_CUSTOM_RANDOM_GENERATOR is out of step with the rest of the
tree where support for this config parameter was removed by
commit 27bcb431cb ("Random number generator driver unification")
Change-Id: If6086fd85e61579c646d09029ef129e8a3b464b8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This reverts commit d73a9bb9c6.
The patch was intended for 1.6.0 release.
Change-Id: Id42058b746a3d2a54e4b1a2983eb58bd10b1ed40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An updated version of ARC GCC reports this error:
nano_init.c:340: Error: inappropriate arguments for opcode 'mov'
The offending in-line assembly code tried to move register value into a
memory location.
Use store "st" instruction instead of "mov" istruction to store
a value in memory.
Change-Id: I91ebd20495612da4d5639a3ef848379705f6dedd
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
If the delayed work FIFO never goes empty (e.g. because the work
callback keeps resubmitting or there's a very active ISR feeding items
there) then the fiber would never yield, causing all sorts of problems
for the system. Adding an explicit fiber_yield() call at the end of
the while-loop solves the issue.
Change-Id: I233b9fc18fc9db9172daf8689bd22d09952089cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Eliminates assert check that complains about an attempt to allocate
a memory pool block larger than the largest possible block size.
In such cases the allocation code now just returns a NULL pointer
indicating that it was unable to allocate the requested block, just
as it does when a block smaller than the maximum size cannot be
allocated because none is currently available.
Note: One scenario in which it isn't unreasonable for an application
writer to request a block that is too big is the case where a receiving
task using a mailbox first receives an excessively large message without
its data and then tries to retrieve the data into a memory pool block
allocated by the mailbox. Rather than forcing the application writer
to check to see if the size of the received message is too big for the
memory pool, or adding code to the mailbox subsystem to do such a check,
it's easier to pass on the request to the memory pool and simply have it
return NULL, which causes the mailbox to report that data retrieval
failed. The application can then perform a single check that catches
both the case where the memory pool simply ran out of blocks and the case
where it didn't have any block big enough to handle the message.
Change-Id: Ifd2cdd8a5927b93d3e9c5df301544e522131d2c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The interrupt stack pointer is now aligned, and we error out if
the sizes of the interrupt and main task stacks aren't a multiple
of the stack alignment.
Change-Id: I2a70c82fc94e25cc6c7a9d5ec165bf2370b8a166
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Arches now select whether they want to use the GCC built-ins,
their own assembly implementation, or the generic C code.
At the moment, the SDK compilers only support builtins for ARM
and X86. ZEP-557 opened to investigate further.
Change-Id: I53e411b4967d87f737338379bd482bd653f19422
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Jira ZEP-68,zephyr.elf shows duplicate routines which increases the foot print.
Current fix removes duplicate routines and reduces foot print of the image
Change-Id: I01a2e5a8a02481ab33a2bb09e9c545d6879c1b81
Signed-off-by: tulasinagraj <tulasi.r@tcs.com>
Improves a handful of comments, and removes some unneeded blank lines.
Change-Id: Ia2b951d23131b0080104c18c06324342de3359ef
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises two fields of the memory pool structure to better reflect
that block sets are involved.
Change-Id: I44a751e7457270391fbe99705010345448df2ff4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the memory pool block set field that points to its array
of quad-blocks to better reflect that quad-blocks are involved.
Change-Id: I159805ce8eee9091221cb1f494a4ab082e3736e5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the names of 2 types to make them better reflect the
data structures they represent, namely:
- block set: a collection of memory pool blocks of a given size
- quad-block: four contiguous memory pool blocks of a given size
Change-Id: I3e424586e97157eea185fba6836e2e89d10d9cd6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates the memory pool field indicating the size of the
pool's memory buffer, since it isn't used anywhere.
(Anyway, it could be computed by multiplying the maximum
block size by the number of maximum-sized blocks.)
Change-Id: Ia11554bdc2b246a1ba0ea33f05c5e6ce6a32ca13
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Alters the use of the field so that a 1 bit indicates that the
associated block is available (i.e. can be allocated from the pool),
and a 0 bit indicates the block is unavailable (i.e. it is already
allocated or does not exist).
The revised definition of this field is more intuitive, since it follows
the conventional "1 = thing is present, 0 = this is not present" model.
Change-Id: Id133d1940aca0dd1c3c1672f989d0c0bb083ebc5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No longer initializes the quad-block descriptors for block sets,
except for the one containing the largest size blocks. The descriptors
for the other block sets don't need initialization since sysgen already
ensures the block pointer field is NULL, and the block status field can
be anything (since it is ignored if the pointer is NULL).
Change-Id: I72cdf772329ef3e6d1babd9da11706d11611e61a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds missing check to prevent defragmentation algorithm from
going past the end of a block set's array of quad-blocks.
Optimizes quad-block deletion algorithm so that it simply moves
the final array entry into the slot for the deleted entry,
rather than shifting all of the entries in between them.
Also enhances comments to make it easier to understand
what is going on.
Change-Id: Ic281c6f3c6dd5df9ec532a302b4103f3d929665b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now use a standard routine for identifying which block set to use,
rather than duplicating the identification code in multiple places.
Change-Id: I2f6577879c23183f3f91e4418d1ea0b2f6eec184
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm to call an existing routine to free an allocated
block, rather than duplicating the logic to do the freeing.
Also enhances comments to make it easier to understand what is
going on.
Change-Id: Ie7a83a8a2e978e8a685c27e07acb5b70aea37afa
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for deallocating an existing block to make it
more compact (and efficient). Address calculation is simplified
and unnecessary error checking is removed (& replaced by asserts).
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: If1803ee09c8f4f73693c0cff9e433a7938f14398
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances comments to make it easier to understand what is going on.
(Doesn't change actual defragmentation algorithm.)
Change-Id: I294f55b8f233d88c01ce30ba9ccff88000dc7936
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Enhances routine name and comments to make it easier to understand
what is going on. (Doesn't change actual allocation algorithm.)
Change-Id: I7d982ed8eeda3a2edd4602c5a10003aa8532457d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises algorithm for allocating an existing free block to make it
more compact (and efficient) by using the same logic to handle the
allocation of any block within a quad-block.
Also enhances routine name and comments to make it easier to
understand what is going on.
Change-Id: I55ca513e6f85df2b548502262e4dbe6bb272596b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Converts check for a request for an impossibly large block
from a run-time check to an assertion. (The run-time check logic
was faulty anyway, since an excessive request would result
in a negative value for "offset", which would then get used
as an array index!)
Also enhances comments to make it easier to understand what is
going on.
Change-Id: I3faa86be177dcbc76912e23fabc2d24724fcba18
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Makes a couple of minor optimizations to initialization algorithm:
- Now initializes block status array for largest size blocks once,
rather than twice.
- Doesn't initialize "count" field of block size descriptors to zero,
since sysgen ensures that this happens automatically.
Also enhances comments for initialization routine to make it easier
to understand what is going on.
Change-Id: I00d907c0f2a86f5b6ea8a63475b40074fe89357c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates memory pool field associated with a capability that was
never implemented. (This field was initialized, but never subsequently
referenced.)
Change-Id: I58cf8c4bb846a66b4c8754654ffc3ff55abcff7f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Used by ARC, ARM, Nios II. x86 has alternate code done in assembly.
Linker scripts had some alarming comments about data/BSS overlap,
but the beginning of BSS is aligned so this can't happen even if
the end of data isn't.
The common code doesn't use fake pointer values for the number of
words in these sections, don't compute or export them.
Change-Id: I4291c2a6d0222d0a3e95c140deae7539ebab3cc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce the family of nano_fifo_put_list and nano_fifo_put_slist APIs,
which allow queuing a list of elements on a nanokernel fifo in one
shot. When called from an ISR or a fiber, the behaviour is not really
different than calling nano_fifo_put for each element to enqueue.
However, when called from a task, it allows the task to enqueue the full
list without yielding to fibers that were waiting on the fifo.
All fibers currently waiting on the fifo will be awakened and given an
element from the list in their order of priority. When some elements are
not matched with a receiver, they are queued normally.
There are two ways of passing a list: with either an ad-hoc queue, by
passing the head and the tail elements, or with a sys_slist_t object.
For the latter, the object must be reinitialized afterwards.
Change-Id: I6ac077f556dc39995191e9149c4a047a3433826f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It is now safe to introduce the callback since nano_timer_init now
calls _nano_timeout_init which does takes care of initializing all
the fields properly.
Change-Id: I5735eeebef233a0a541ec8b2a354b65da98082fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of _nano_timeout_init it prefered to call it
to initialize the _nano_timeout fields properly.
Change-Id: I83e9c63f9bb2903c508264d1199d2c687c330ec8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will allow initializing a nano timeout that is not associated with
a thread.
Change-Id: Ic71175b0059396b19a0e3616f4fab570071c3d48
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a delayed version of nano_work API which is useful when
handling timeouts since the same stack/workqueue can be shared.
Change-Id: Iac43796fe96deb0a9c8976c91a65104b57779b00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
This adds a callback to struct _nano_timeout which is called in ISR
context allowing more flexible handling of timeouts.
Change-Id: If837b0b51b24dfffebac6f99f4d66fdf01c164f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Overflowing the k_server command stack will now trigger an __ASSERT()
when CONFIG_ASSERT=y.
Change-Id: Icf6f4242ab8a9897918769415a0f7485602d7630
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
OS tick period (usually 10 ms) is not sufficiently precise for task
execution analysis (like processing CPU load per context)
With that modification, the timestamp used by the kernel event logger
is 32-bit LSB of platform HW timer (for example Lakemont APIC timer
for Quark SE).
This timer period is very small and leads to timestamp wraparound
happening quite often (e.g. every 134s for Quark SE).
This wraparound must be considered when analyzing kernel event logger
data and care must be taken when tickless idle is enabled and sleep
duration can exceed maximum HW timer value.
Change-Id: Idc545da8f828a7357a69d83ff25c9afd09dab3c4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Add a way of finding if a microkernel task is the idle task instead of
of duplicating:
task_priority_get() == (CONFIG_NUM_TASK_PRIORITIES - 1)
which could be subject to change.
Only available for microkernel, since there is no such concept in the
nanokernel.
Change-Id: Ie8930981f1a2ac5ff16f905f4eb4e333c8b59c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In order to build test/kernel/test_stackprot/microkernel for the ARC,
the _MOVE_INSTR needs to define what the move instruction is for this
target.
Change-Id: I087cc5baa4c41297ce52323556e94aab424aa891
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Locks interrupts in the microkernel routines _k_state_bit_reset() and
_k_state_bit_set(). This is a necessary pre-requisite for allowing
microkernel objects to pend on nanokernel objects since that feature
will require the manipulation of the microkernel queues in the context
of an ISR as well as the kernel server fiber.
Change-Id: I2d263707e0d3aed75bba971df878daa3d7ae1d11
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds support that allows fibers and ISRs to invoke the microkernel
no-op kernel service request. This is useful for cases when the
nanokernel needs to invoke the microkernel task scheduler.
Change-Id: I1f4b2a39ac6b5e44bb1b6c6b3cd6034262bbada8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the timeout recalculation in the following routines:
nano_task_fifo_get()
nano_task_lifo_get()
nano_task_sem_take()
_nano_task_sleep()
Without this fix, a task that called one of the previously listed
routines could in theory sleep/wait up to almost twice the requested
timeout.
Change-Id: I53196be84e65874e94a62d5b0be1b7aaaaeda91f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the nanokernel infrastructure to permit microkernel tasks
to block/unblock on nanokernel objects. Multiple tasks may wait
on a nanokernel object's dedicated task wait queue.
It is important to note that when data is posted to the object
all the tasks on that object's dedicated task wait queue may be
woken up but the data is not immediately given to any of the tasks.
This is done to maintain consistent behavior with the nanokernel
as in a nanokernel system, fibers are given preference in both
waiting on and getting data from a nanokernel object.
Change-Id: Ia5c7f21ae59a367d9fec23dafc3a918d9e767db5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the microkernel infrastructure to permit a microkernel task
to [un]block on a nanokernel object. Unlike tasks that [un]block
on microkernel objects, the work for [un]blocking tasks on nanokernel
objects will not always be done in the kernel service fiber. One of
the repercussions of this is that in many cases the microkernel task
scheduler must be explicitly invoked (by issuing a no-op kernel
service call).
Origin: Original
Change-Id: I2b145668cef142a7a4034e191116fcb344a9b8b3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fibers initialize this back pointer to NULL as they are (by definition)
not microkernel tasks. Microkernel tasks initialize it to their
corresponding 'ktask_t'.
However for nanokernel systems, the back pointer is always NULL. This
is because there is only one task in a nanokernel system (the background
task) and it can not pend on a nanokernel object--it must poll.
Change-Id: I9840fecc44224bef63d09d587d703720cf33ad57
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the TF_NANO wait flag reason to indicate that a task is pending
on a nanokernel object.
Change-Id: Ic20ef79398da7d9118bdf775e22b8f8a31501f7f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We really should have more faith in the compiler, it generates
code to implement this exactly like the arch-specific assembly
versions, and on ARM is actually 4 bytes shorter.
FUNC_NO_FP used to disable the usual C preamble to update the
frame/stack pointers, which is how the sizes are still the same
or less. It's debatable how useful the occasional use of
FUNC_NO_FP is in practice since it hinders debugging and in a
production build frame pointers should be globally disabled, but
we can address that later.
Change-Id: I6c4b64ab3e3a9b6f91d52fa8c92e6e79a986fc77
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
This wrapper exists so that the ESSENTIAL bit doesn't have to be set
explicitly in _nanokernel.current. (And a note is added to nano_init to
avoid a nasty gotcha there.)
Change-Id: I4026ac0cfeace60e36abdbccf15554759f2dbf7a
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
These C variants of atomic operations can work on any arch,
have platforms select them if they don't have ASM equivalents.
Change-Id: I38eb03bb58beff865681ee56ef7bc0fcded1e906
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The file device.c uses errno codes so it should include errno.h.
Change-Id: I93e806a9b20b2c9bcb245ac5e86fba70486c9591
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Certain Low power SOC states (e.g. deep sleep) will result in device
IP blocks losing state. In such a scenario it can be useful to have
a mechanism for devices (driver code) to signal the power manager /
policy that they are in the middle of a transaction.
We expect the device driver code to make a call to
device_busy_set(device *) before initiating a transaction and
device_busy_clear(device *) on completion. It is expected that device
driver developers will add this as necessary in their drivers.
Further an API is provided for power manager application / policy to
check this. Based on this the power manager / policy can decide
whether or not to go into a particular power state.
Change-Id: I0fedd90b98e182cd41b53c7f9e08655532822faa
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This changes the behavior of device_get_binding() so that
it returns NULL if driver_api is not set. This provides
a way for driver to state that it has not been initialized
properly, and prevents app from using it since no reference
to the device struct will be returned.
This implements the idea specified in [1]. The idea is to
reuse an existing resource by piggy-backing onto driver_api,
thus avoiding an extra "device state" variable in the device
struct. This differs from the code specified in the mailing
list by checking driver_api for NULL first. This avoids
the unnecessary strcmp() if driver_api is NULL.
[1] https://lists.zephyrproject.org/archives/list/devel@lists.zephyrproject.org/message/MZB5PYBSRHV3NIEHJYXYQVLTPFIIHPB3/
Change-Id: I978b1a6683cd56c8a72532d6368c47e67515c82d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a problem where the nanokernel FIFO state information could get
out of sync due to a timeout.
The nanokernel FIFO structure nano_fifo now maintains two separate
queues: one for waiting fibers and the other for posted data. This
permits the safe and independent querying of the queues as needed
when getting and/or putting data from/on the nanokernel FIFO.
Change-Id: Ifbcb5004558b06fc55cad2a955f5be20e716b392
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Device drivers may use task_sleep() routine during the initialization.
As device driver initialization is carried by idle task, it can not
be sheduled out as any other task. Idle task goes into a wait loop
instead.
In order to invoke task_sleep() device drivers must enable
CONFIG_NANO_TIMEOUTS option.
Change-Id: Ib73a2ad1f3c0bda44c24f2417e102bfaa3a13a15
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Most of the SoC and board Kconfig use the same values for
driver initialization priorities. So refactor them, and
discard duplicate ones.
The shared IRQ init priority was changed so that the kernel
default init and device init priorities can be standardized
across all SoC/boards. Same goes for DesignWare SPI driver.
This also changes the UART_CONSOLE_PRIORITY and
IPM_CONSOLE_PRIORITY to UART_CONSOLE_INIT_PRIORITY and
IPM_CONSOLE_INIT_PRIORITY, to standardize across all drivers.
Note that this does not take away the ability to override
those values. This just provides reasonable defaults such
that there is virtually no need to override.
Change-Id: Ibbd95d802c637df06f9a2fd48763ee1e6f4ff627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: Ie1d391945cd1cfb9a5dc199783c2d224eb1b0ef3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
have micro and nano kernel next to eachother.
JIRA: ZEP-107
Change-Id: I8d6e4354cf6a8cdf1193c641b112a078cd7ec460
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
KERNEL_EVENT_LOGGER selects EVENT_LOGGER which is then used to
enabling building. Skip EVENT_LOGGER and use KERNEL_EVENT_LOGGER
directly.
Change-Id: Ib9cf3a58b12bf4e78f264d8e8ac48a8104120c3b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing option for adding time stamp to boot banner.
Change-Id: Idda61feeef4a89c1aa8bb7e81b52272babeb1efe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The thread monitor allows to iterate over the thread context
structures for each existing thread (fiber/task) in the system.
Thread context structures do not expose thread entry information
directly. Although all the information can be scavenged from memory
stacks. Besides, accessing the information depends on the stack
implementation for each architecture.
By extending the tcs we allow a direct access to the thread
entry point and its parameters, only when thread monitor is
enabled.
It also allows a task to access its kernel task structure
through the first parameter of the thread.
This allows a debugger application to access the information directly
from the thread context structures list.
Change-Id: I0a435942b80eddffdf405016ac4056eb7aa1239c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Moves some code from pool_alloc into a helper function,
to avoid code duplication when implementing a pool based heap.
Change-Id: I29b9bc1b8ba166a2187df5ea037aad4d4a522f69
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This patch updates some help sections to remove the "ERROR:
Unexpected indentation" messages during hmtl documentation
generation.
Change-Id: Idcdc17727b921b6145f9eb28d85975ceca273ce2
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Like for the other context-specific APIs, also provide a
context-agnostic wrapper.
Change-Id: Icf0a62f4c06aec42f0febc298edbd8bdeec63749
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A call to xxx_fiber_wakeup() if the timeout had expired would put the
fiber on the fiber ready queue _again_, corrupting it, or could remove
the fiber from a nanokernel object wait queue, prematurely un-pending
it.
We now verify the fiber is indeed still on the timeout queue and also
not on a wait queue, meaning the fiber is indeed sleeping.
Change-Id: Iba454d79ab50db01632b0591fb7b589221b5110b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Until now, this was not needed since the checks for being on a wait
queue were only performed if a fiber was known to be on a timeout queue
as well. However, an upcoming fix for _fiber_wakeup() needs to verify if
a fiber is on a wait queue even if it is not timing out, because said
fix needs to check if the fiber is timing out as well.
Change-Id: If1694ceb551f2029d6a145963e81d3826956fd1d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
An upcoming fix for _fiber_wakeup() will need to know if the fiber was
dequeued from a timeout queue.
Change-Id: I09ca039098c09a997db73f4719261352f0af07c1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds the following routines for waking a fiber that was previously
put to sleep using fiber_sleep().
isr_fiber_wakeup()
fiber_fiber_wakeup()
task_fiber_wakeup()
Change-Id: I7d78ee6997163d71b92f388a7b4c484f2e97862b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The fiber_start() family of routines now return a nanokernel
thread id (nano_thread_id_t). This is a pre-requisite step for
allowing fiber_sleep() operations to be cancelled.
Change-Id: I74a3885eda3252c158f4a48e90244569633469c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is part of an ongoing development of power management
support in zephyr. This implementation builds upon an existing
hook interface and adds more enhancements. This was tested
with reference implementations on quark_d2000 and quark_se.
Change-Id: I28092b7ec90ce1f1cc661cf99ca88708910c8eb2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Renamed functions and labels used in power management code
according to coding convention. Only doing this to relevant
functions and not touching functions that will be removed in
future patches.
The stack used during resume would be necessary so
renamed that too.
Change-Id: I2f09a349b0f0fd6520c11b4cd73f4c8e1a13f100
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This is a prologue to reverting:
commit 3c66686
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Tue Feb 9 17:34:02 2016 -0500
sys_clock: start the microkernel ticker in the MICROKERNEL init level
to allow the devices initializing in pre-MICROKERNEL init levels to poll
the hi-res clock (sys_cycle_get_32()), which relies on the system clock
having been started.
This change allows starting the system clock in the NANOKERNEL init
level by delaying announcing the ticks until the MICROKERNEL init level.
Change-Id: I43d54bb5e2f182d4edd880da0124a0817f911943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The file is already guarded with
obj-$(CONFIG_STACK_CANARIES) += compiler_stack_protect.o
So no need to check for CONFIG_STACK_CANARIES again in the file itself.
Change-Id: I09cf274679a1678f02478fca799a3f6507e77211
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is now safe to enable sys_thread_busy_wait() for ARM as an earlier
patch has fixed the build system to link against the correct intrinsics
library.
Change-Id: Ib5ed036d996461b91f372b2b3e8f597a925d3292
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moving comments back to the 70 character limit. Also moving some of the
comments up to be included in the doxygen headers instead of inline.
Change-Id: I56a6015e5fd6da81e9a06701217e62e899b6aa62
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Zephyr includes a Task Monitor feature that allows to
track events on the microkernel server scheduler.
Task monitor is integrated as a profiler point for the
Kernel Event Logger feature.
Change-Id: I7b8be5872439a333f976eada1aa3511d93b46388
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Task monitor is being tracked as a profiler point of the kernel
event logger. Now, the capacity to register task monitor events
is dictated by KERNEL_EVENT_LOGGER_BUFFER_SIZE symbol.
Change-Id: Ia4fe04c7d46fe41524c53447ad51af2e03ea5a15
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Kernel event logger keeps track of task monitor events.
Old structures are not needed anymore.
Change-Id: I2267bdb3c2f27ea87d8675c4ecf0646ea62761ae
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Interrupts must be locked when processing announced ticks in
_nano_sys_clock_tick_announce(). This prevents higher priority
interrupts from interrupting the tick announcement and possibly
corrupting the timeout and/or timer queues.
Change-Id: I4e87fc5b3ad36161e0accb50b2691f975f5877e5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They have been replaced by DEVICE_INIT().
Change-Id: I06551f37593a3debb7eb221badd267bb5c7040c0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The macros _NANO_TIMEOUT_TICK_GET() and _NANO_TIMEOUT_ADD() will be
used in later commits to help simplify the nanokernel APIs.
Change-Id: I668af85d775eab112953d064d9c91de607f60a59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the routine names referenced in the INT_LATENCY_BENCHMARK
kconfig option description.
Change-Id: I74c67a8f54cfc3b0ce75fc390d7ab6bd39561d6f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routines _int_latency_start() and _int_latency_stop() have been
replaced by macros that evaluate to nothing when the kernel config
option INT_LATENCY_BENCHMARK is not enabled thereby giving a performance
boost to the x86 versions of irq_lock() and and irq_unlock().
Change-Id: Iabfa7bf001f5b8396e7bcf5eebd6b1aa342bac46
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
An architecture that supports tickless idle in the nanokernel can allow
selecting TICKLESS_IDLE by forcing NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
be enabled.
Change-Id: I4e45b619c599913d40b7bc19902094fb361b1e3b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Re-applying this patch, which was lost when moving to kbuild:
commit 64c0f13f9380 ("kconfig: remove useless tickless idle dependency")
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Mon May 11 15:13:46 2015 -0400
kconfig: remove useless tickless idle dependency
TICKLESS_IDLE_THRESH depends on TICKLESS_IDLE, which depends on
ADVANCED_POWER_MANAGEMENT, which itself already depends on
MICROKERNEL. There is thus no point in having TICKLESS_IDLE_THRESH
depend on MICROKERNEL.
Change-Id: I95edcc7b927dd122b80f376c96233decdcc9afab
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The architectures need to add support for it in their nano_cpu_idle()
and nano_cpu_atomic_idle() implementations, as well as in their
interrupt entry and exit code.
Change-Id: I44a241c56e624dc8e32e08db29a84489314cd7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Note that the A->Comm is a pointer to the microkernel functions,
and thus is highly probable that the high 8-bit is occupied.
Therefore adds a new field in the monitor struct to store the pointer.
Change-Id: I7bcb34108c89a97cc38b2ac411ae4139b62786f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move SECONDARY init level from essential pseudo-fiber
to the idle task, so the device initialization routines
may use interrupts and wait for interrupts.
Change-Id: I5afa92d8b304de5b295450f0a8a761385b7c2566
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates comparisons in the pipe code to put the constant on the
right side of the test. This improves compliance with checkpatch.
Change-Id: I8e55afd94e0532dd7a67bd83e737846279654dff
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates comparisons in the mailbox code to put the constant on the
right side of the test. This improves compliance with checkpatch.
Change-Id: If84cfbe4bbca312fabbb70d45f05675c9c15d011
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Saves an errno per-thread, retrieved via _get_errno(), instead of
changing the value of a global variable during context switches to avoid
a hit to the context switch performance.
Per-arch asm implementations are provided for maximum performance.
Enabled by default, but can be disabled via the CONFIG_ERRNO option.
Change-Id: I81d57a2e318c94c68eee913ae0d4ca3a3609c7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The system crashed if an interrupt occurs before the
kernel event logger is initialized (Error seen on Galileo).
This patch adds a condition to check if the logger is ready
to operate.
Change-Id: I27d7cc31f386780725b0c47a9c92e9c064fc128a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This patch remove the dependency of the ADVANCE_POWER_MANAGEMENT
for profiling sleep events that was supported only for microkernel.
Allowing us to also use this feature in nanokernel-only systems.
Change-Id: I1761eb6c4d72f477b419dfca5dc152b0fb69ee27
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Replaces calls to nano_cycle_get_32() and task_cycle_get_32()
with sys_cycle_get_32() as that is the preferred API to use.
Change-Id: I0ad1c50083c4cfdd9a26c2f20ba24e065410d90d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replaces microkernel global variable _k_sys_clock_tick_count with the
global variable _sys_clock_tick_count. This allows both the microkernel
and the nanokernel to use the same variable to track system clock ticks
instead of using two different ones.
Change-Id: Ia4eebf022f59d130ad1882e0e550016527543a45
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames nanokernel global variable _nano_ticks to _sys_clock_tick_count.
Change-Id: I857407f1f7e8d9fd2eedc1c1696851173e58d2b4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the type of global variable _sys_idle_elapsed_ticks such that
both its nanokernel and microkernel definitions are of the same
type--int32_t.
One of the repercussions of this is that code related to the routine
_nano_sys_clock_tick_announce() does not need the application of
typecasting.
Change-Id: I3d7374cd1a32aea7e4651726febde74ebe4ac8ac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fils in gaps. Also relocates documentation for internal APIs.
Removes mention of non-existent task_sem_group_take() API from
the Kernel Primer document. The microkernel's semaphore group logic
currently allows a task to take a semaphore from a semaphore group
in a blocking manner.
Change-Id: Ib41a43775a97483a5adc552b70575ae4269aba35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
It's not really scheduling a fiber, it's making it ready. So, rename it
to _nano_fiber_ready().
Change-Id: I34bf67a8f0ea641bb2fd1c47fe8d689fef754cb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some timer devices, such as the HPET, read their frequencies at runtime.
All global constant values must be set at runtime in that case.
Change-Id: I408babce6deb857748a87691132d7e27e88f0bb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some global variables were duplicated, being defined in either
k_ticker.o or nano_sys_clock.o depending on the type of kernel.
nano_sys_clock.o is always generated, so move the definitions found in
that file from inside the NANOKERNEL guard and remove them from
k_ticker.c to avoid useless duplication.
Change-Id: Iea67f89cad44b29671df7fa4d573105c0bbe3102
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This routine allows the background task to sleep for a specified
number of ticks.
Change-Id: I2533005e3d9a564c2ca0de8333e224743cefb658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic fifo routine:
nano_fifo_get_wait_timeout()
That routine is a convenience wrapper for invoking the task or fiber
specific implementation.
Change-Id: I9bd709ea416db834e2a0c5de81257c363e7db066
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Force setting the value in the platform kconfig instead of defaulting
to 0.
Change-Id: Iceeb6346afc4217dd09d31c28898e3693b08f781
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Event ID are not validated anymore against the maximum event number in
the system, since they are pointers now instead of low integers.
Validation can be useful, but only do it in a debug kernel, with no
penalty to a deployment system.
Change-Id: Ifd8dc8841892f6d19bbcb0c641a655fd0cb6ddb7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fills in gaps. Also streamlines descriptions for internal APIs
that don't require the same level of detail as public APIs.
Change-Id: Ic0f8149d14a8dab5e6df28b594c9b2e17f73e7b6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes the nanokernel sample of the kernel event logger
that shows the event messages for context switch and interrupt events.
Change-Id: I4e972adb06b81f2f548bbabe8cd6577af633001c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Remove prototype support for C++ constructors, since it is not well
designed. Device drivers (or other application code) that requires an
automatic initialization capability should use the device initialization
macros instead.
Note: Support for C++ constructors may be re-introduced at a later date.
However, a number of issues need to be settled, such as when the
constructors are invoked and what context they run in. (Running them
during nanokernel initialization, as was previously done, is probably
not the right approach.)
Change-Id: If6d27ac16b485cb39d5ec34084e9d0f1991074f4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It can be used by some subsystems even in a microkernel.
Change-Id: I07241aab94ecf67c94dce2d05f2cd774b2a6b044
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The microkernel server now relies on the fact that the command packets,
events, and semaphores passed to it via its command stack are 32 bit
aligned. This change explicitly ensures this alignment, rather than
leaving it to the compiler's discretion.
Change-Id: Ied7a0a0b4cc504c924520b72ef2b207b49470448
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises microkernel semaphore sub-system to allow ISRs and fibers
to give a semaphore without having to define a command packet set.
The microkernel server now supports a 3rd command type on its
command stack, allowing a semaphore to be given in a similar manner
to the one used for the existing "give event" command type.
Change-Id: Ibd7fb1a77949792f72acd20a9ee304d6eabd62f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This option is not building and currently not supported, removing
it because there does not seem to be a use case for it.
Change-Id: Idb8ffedf83f43cffc68a01573c6f2d1a90fc40fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Revises microkernel server command stack processing to allow the
server to support more than 2 types of commands. The lowest 2 bits
of the command now indicate the command's type:
0 - process specified command packet
1 - give specified event (from ISR or fiber)
2 - give specified semaphore (from ISR or fiber)
3 - reserved for future use
Note: Support for type 2 will be provided in a future commit.
Change-Id: I9f83f92a301fb5df3dd479b5d43b187371e11ad8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kconfig option CUSTOM_SECURITY is not used anywhere.
Change-Id: Ifac00cd1234ff9498c2f977054a902e0153b6b28
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I7dd5645db1de00ab4bf2ca3c7a8bae906e8d9e54
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I7e920e6de8f4b7a726c03c05edea3cbac69eb374
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I819d13f0d7a23e3a61dcda6a3ced18810b192158
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Ie655181d5ed11a71cadfa218f396f0b64992ca34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Ib3f69be9f9273e57952a3ebceebc82d84c607c64
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moving many of the functions from the old format of inline comments to
the newer doxygen format.
Change-Id: Ib0fe0d8627d7cd90219385a3ab627da8f9637d98
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Add a list for each kind of microkernel object. Add the register of
the public objects to the tracing lists in the dynamic initialization
function of sysgen.
Change-Id: I8c413812e4db0f443c9dd3a5501e0096270dc70e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a list for each kind of nanokernel object. And link the object
to the list on the initialization function.
Change-Id: I7a51902a8d1b306ec50d9486e55af286127fcb1a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I8f51f861e2250c87c296b697ef5b6610ce644b34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improves the efficiency of the search by doing a single pass through
all device objects, rather than searching one level at a time.
Also enhances the comments for this routine.
Change-Id: I6786f24381f03d74d8c559ccbd7aa6a37683a8b7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Introduces the SYS_DEFINE_DEVICE() macro, which supports 5 distinct
levels of device initialization and 100 priorities within each level.
Note: The existing init macros (e.g. nano_early_init()) have been
adapted to utilize the enhanced initialization model, but will
eventually be retired.
Change-Id: If677029d8b711a3fae9b2f32b5470cd97d19aeda
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Reworks the internal design of a command packet set so that
the command packet array is split out into a separate variable
lying in uninitialized memory. This shrinks the command packet's
data section footprint to almost nothing.
Note: A side effect of this change is that it is no longer possible
to define a command packet set as a "static" variable since the
CMD_PKT_SET_INSTANCE() macro now generates two variables.
Change-Id: I9c7ebe637edf879758589ff4a26ace1303790bf7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provides a way for a fiber or task to busy wait for a specified
period of time. This is useful in situations where a delay needs
to be performed without switching execution to another context,
such as:
1) It would take longer to switch to another context and then switch
back again than to simply busy wait.
2) A delay is required by the kernel's main task (i.e. the nanokernel's
background task or the microkernel's idle task). This task is not
allowed to voluntarily relinquish the CPU because this would leave
the kernel with nothing to execute in its place.
Change-Id: Icbe28613014f659e9528893ae58f7b8008c18a61
Original-work-by: Jeff Blais <jeff.blais@windriver.com>
Further-adapted-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Revises microkernel initialization code by incorporating the existing
_k_kernel_init() and main() routines into _main(). This optimizes kernel
initialization a bit, and allows application code to use main()
if desired -- for example, as the entry point to an application task.
The change also eliminates the need for sysgen to generate a routine
whose content is always the same.
This change preserves the existing order of operations done during
kernel initialization, and leaves further improvements for later.
Change-Id: Ie03d8a6f38f8a311f398667ed977fd8478719d70
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option is no longer used in any configuration
Change-Id: I2f9be9f286cff3f38722ae1fe807661a1f99cdcd
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
ENHANCED_SECURITY is being used to enable security options the
projects that require security options explicitly enable these options
the dependency is not required.
Change-Id: Iec96e32bd7a5faa78672d355aad368f48b0ee087
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the default for ENHANCED_SECURITY to no in preparation for the
option to be removed.
Change-Id: Ic46730b187f361226064a3e205f48433b0bebdd7
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Features displayed with "[EXPERIMENTAL]" should depend on
CONFIG_EXPERIMENTAL.
Change-Id: I0a86dff442014caa2fa4629138dbe29e69d5b853
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Do not enable the feature by default when EXPERIMENTAL features
are enabled.
Change-Id: I0538f9f94bb47a4bc870c8974e80faf273070f91
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The files will have the needed fragments to move a .config
file to either a nano or micro kernel .config. This will let us
get rid of the micro_*_defconfig/nano_*_defconfig in the future
and once the sanitychecks are adapted leaving us with a single
fragment file per platform and thus making it easier to maintain.
Change-Id: If23b32cc259de498816ddc8be15cdd6e0014106a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Due to similar padding issue as pipe, the list of task object
may not be used directly. As mentioned before, some compiler/linker
may pad the large struct. For example, compiling under gcc and
march=i686 pads the struct to 32-byte alignment (march=atom to
64-byte alignment). This causes issue with sizeof() and pointer
arithmetic because they have no idea about the padding.
When the stars align in a certain way, these task structs may be
corrupted. So add a task pointer list and use it for task
manipulation. The task list remains as it is beneficial to group
them together to take advantage of cache locality.
Change-Id: I0e86bfe05742040f4540d7854c1ac14e76162776
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It was badly named: this routine initializes what cannot be done
statically, i.e. what has to be done dynamically.
We also do not have concepts of "node" anymore since the kernel is
single-node only.
Change-Id: Idde3183ca01ca3f70c5ae0e948734a965582ded8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When THREAD_MONITOR is enabled, not removing the fiber from the thread
list (a) would cause the list to be erroneous, and (b) would cause
corruption of the list if the fiber stack was reused to start a new
fiber (or any other usage really).
Change-Id: I622ffdbd146ec4b0e78b051d1b444fdf35efcd1e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the documentation of _thread_exit() to reflect the fact that a
task can call it if it does so with interrupts locked. A task or another
fiber cannot preempt a fiber, so a fiber can still call _thread_exit()
without locking interrupts. If a task locks interupts first then calls
it, no fiber or other task can preempt it either.
Change-Id: If8624842fc202a0917b0499458e14f95d7f461df
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The profiler now uses the generic ring buffer. The dropped event
count is stored in the ring buffer's value field. The data size only
refers to the extra data attached to the message and NOT any internal
representation of metadata inside the ring buffer, the event_logger
APIs now pass this information along in dedicated parameters.
Change-Id: I1f168e6a05e8d937bf86b2a4cccecbb04b0118c6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch is based on some code contributed by Dirk Brandewie.
This is a generic data structure for queuing data in a FIFO ring
buffer. Any given data enqueued is annotated with an app-specific
type identifier, and small integral value. Use of a data pointer
is optional if the necessary information can be conveyed in the
annotations. We want all the metadata to fit in a single DWORD.
The ring buffer always contains at least one free dword in the
buffer to correctly distinguish between full and empty queues.
Concurrency control is almost nonexistent; depending on usage,
apps may want to introduce the usage of semaphores and/or mutexes
to preserve the integrity of the ring buffer or provide notifications
when data is available.
Change-Id: I860262d2afc96db4476d4c695a92f7da355ab732
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Doxegenize and cleanup headers for nanokernel
- fibers
- context
- timers
- stacks
Also minor cleanup of x86/arch.h
Change-Id: Ib65568d4ec034b69e8a6214ba4b52a7f719300bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename field 'MovedReq' of the struct:
- 'k_args_args' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3ed7ad0b4fed3791b79ad279ebabf7440b8edf7c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Extra' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I86a0873122576486602bd18967748748f7abce12
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Setup' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2a3013131595b66508c7a6fb6e4b364ceb06a459
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iTotalSize' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2422d13699443d9744f882d566da1089943cf3db
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Action' of the struct:
- 'moved_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3bf9c0c8142bab4f87d0a6e2b6ffe36fa20cb026
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Sema' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I0cb8cab6f8f4dab2a93c4bcb0bee6c40dbbf72bc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ContRcv' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ic8984aa2ed7e62c2ed7a25e825e32b2c55bb7e5d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ContSnd' of the struct:
- 'moved_req_args_setup' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2476ad8641819431d13d99f1f55cb80efefa064d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSize' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I8463da22f659df7db1419195224f4fd818af1a03
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ID' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I090d0954547b80a58307a95433b59a6f5ed9ffe6
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pReader' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ic6f6c042bdf392c8ccbd407f57cc520fcf6f5f0e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWriter' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Idc2530faa4c288e9679d65f66809ceff7f7d6d59
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'XferType' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Id7097fa65f54e12840b5dd78eaa8991aea8e225c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pPipe' of the struct:
- '_pipe_xfer_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I78c7343e79f25363ba0678f0d1913e5210ac4c77
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendXfers' of the struct:
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ie9b4743165ad27ac07e93d7bd8328aba44cf5e89
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSizeXferred' of the structs:
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I29ab4b7b277453f757f5964628f331e8e1bbe674
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Dummy' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I79f7ccf1d0f790109b8337478bb203fd75052e5f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReqType' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I3dbcb122c72509d4024f14d39eac1c28531c2ebb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Async' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I44d2f72b36809b2acc1225e351bdd16bbd0322bc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Sync' of the struct:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ifbc99dafd21be5f63043191a510e39a02e1b5c32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReqInfo' of the structs:
- '_pipe_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_ack_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I48c852656acc8d9306a2a0739f805bbff0d5258c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iSizeTotal' of the structs:
- 'sync_req' in the file kernel/microkernel/include/micro_private_types.h
- 'async_req' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: Ia1187bb5707a7c858903425d420fcec23380d308
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pData' of the structs:
- 'sync_req' in the file kernel/microkernel/include/micro_private_types.h
- '_pipe_xfer_req_arg' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I2759569fc716e5fa6adbc60143203e75ab201e03
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Params' of the struct:
- 'req_info' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I11c36baa6f0d37f106d5ecdd236ecf216e0ac32e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Tail' of the struct:
- 'k_tqhd' in the file kernel/microkernel/include/micro_private_types.h
- 'List' in the file include/misc/lists.h
Change-Id: If857235ab6ec83fb058e0e2857a2828b8bfd308a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Head' of the struct:
- 'k_tqhd' in the file kernel/microkernel/include/micro_private_types.h
- 'k_args' in the file kernel/microkernel/include/micro_private_types.h
- 'List' in the file include/misc/lists.h
Change-Id: Id7c2bdfc8d928ca835894acd9125c0ec96502ff0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'taskId' of the struct:
- 'irq_obj_reg_arg' in the file kernel/microkernel/k_irq.c
- 'task_irq_info' in the file kernel/microkernel/k_irq.c
Change-Id: I9e2d1fb84e4c3a0a5c1b9b8fc1fa9073091faf66
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'cmdPkt' of the struct:
- 'cmd_pkt_set' in the file Include/microkernel/command_packet.h
Change-Id: I60b58f58d44c300387722f0a9f46fc0c83f4cf69
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'nPkts' of the struct:
- 'cmd_pkt_set' in the file Include/microkernel/command_packet.h
Change-Id: I49d61060fc312d32c7840741c9295de5787d8823
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Free' of the struct:
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I80362df263d22c786cb0c6c856069394a391e290
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iBufferSize' of the struct:
- '_k_pipe_struct' in the file include/microkernel/base_api.h
Change-Id: I0e0078b2b521cdfb40e42b915a0b79d621edcccc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'ReadMarkers' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I05daa841f6b256079e6102c2da86488c7962a065
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'WriteMarkers' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I586e3fbb871b254c125908f1f042ca83d7c2a3bf
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'BuffState' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8a0c4e6d7ae3a06b7e6b27777fd7e8c4fb1513e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bReadWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I92f3b560c7cc0104afeb44b65f80fcda8d89206d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bWriteWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I9ae1bbd0561a3cb95251a021b90c7230cfad1fd7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendingWrites' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Id2edba8217e652d2ae741819d33ced2986d4d1a8
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAvailDataAWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I93aff3b834b4959f48eea36ea5e6764e67175400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAvailDataCont' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Id2a45f9f838fdc557bfbecbe0a492f95a34517a7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrPendingReads' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I01b28e1286e7d6cb89efe53826807c6793b3976b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFreeSpaceAWA' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8a55d3f0012cbeca4caa4d92024525ede865201f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFreeSpaceCont' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Icc9da1162f594349799e3503eafad29d8a2e52a2
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pReadGuard' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I8b55d53b1ca85e828a4907d15b556f8875aa40bd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWriteGuard' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I71e615342a800a62612f47b365260fe3bc3d27fd
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pRead' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: I3fdc8d0c3774b29227d65e33dbd74aabef8df172
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pWrite' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: I6b344f5b58e8ce83505016a240e99142d0720d6e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pEndOrig' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I7a05f3e43ae7942455eb05093f7a0a66585163b6
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pEnd' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I858e22e7ecf77de123b93560e3b9ec99c7bb7365
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'pBegin' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: I6567e66cc891d052b3c7faa26b23b41dba8430a5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iBuffSize' of the struct:
- '_k_pipe_desc' in the file include/microkernel/base_api.h
Change-Id: Ife173a65051fecaaa652935b888b9b7921bd75f8
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'aMarkers' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I47477bed8cb417c10e34ea412e3823db461df694
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iAWAMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I90936fb6744812462ddb56959a106bae80285a21
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iLastMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: Id1db9432b6ddeaa46877f395e46bd81d17c05d19
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iFirstMarker' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: Ia25fcbf11ad4d842c19e495e345daff53f42a7a7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'iNbrMarkers' of the struct:
- '_k_pipe_marker_list' in the file include/microkernel/base_api.h
Change-Id: I5634e2ac1507974f29183bc00011bc25f8d2ab0c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Next' of the structs:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
- 'Elem' in the file include/misc/lists.h
Change-Id: Id0155d61f1fc607c012d6ddc0d27cfcb6c966c47
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Prev' of the structs:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
- 'Elem' in the file include/misc/lists.h
Change-Id: I64da601298199cf9b1da6ae10d697e5bdfabdc32
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'bXferBusy' of the struct:
- '_k_pipe_marker' in the file include/microkernel/base_api.h
Also rename variable instances related to this struct field.
Change-Id: Ib945778ac62094d2d513250e307bf159d640e05c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Hmark' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I13be24d3c3654afd5fa1723a32024d0e139a1e80
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Nused' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: I698b64366fcb5ead77edfd067ddb96d16f1f179b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Deqp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I844b8f3f6d0f1f337856d3e1805f4d6cb1d29042
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Enqp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I182a8be82088b808f8ccedcf76deec249cd4d2c0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Endp' of the struct:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
Change-Id: I83c351cb8a0e33c8a0e49adb63307c2cd71f5395
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Base' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: Id21c01e26c8cad7b6b5ba350b6c9f5d5b78acaae
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Esize' of the structs:
- '_k_fifo_struct' in the file include/microkernel/base_api.h
- '_k_mem_map_struct' in the file include/microkernel/base_api.h
Change-Id: If9a6636cb9dc637e62e8dd5335923ad5067cde5a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>