The APPLICATION_BASE variable in the example Kconfig file was copied
in from an (out of tree) application which relied on it during the
Kbuild days, but it's actually not needed by the CMake build system
and should be removed.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
installed GDB on host might not be compatible with the binary generated
by Zephyr. Mention that we need to use the gdb that corrosponds to the
toolchain being used.
Fixes#4312
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The line between Zephyr versus application is blurry since they share
a configuration, but try to disambiguate.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The documentation regarding application-specific Kconfig options is
unclear. Fix that.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The ELF format and extension is an acronym that needs a
definition. Add it.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Grammatical fixes caught in review of unrelated changes.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix the instructions for when an alternate CONF_FILE is used.
Reported-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Re-work this section for clarity, making it clearer where the division
between emulated and real hardware is, and cleaning up the
instructions. Also re-work for correctness, updating Kbuild-style
flash instructions to use CMake.
Also make sure users know they can flash and run from anywhere on the
system using cmake --build.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix the white space around "Naming Conventions", which is currently
appearing on its own line.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This document's flow could be improved a bit. The overview section is
followed by somewhat dense reference material, which is then followed
by step-by-step instructions central to the application workflow.
Fix this up by moving the details to the end, and adjusting the
transitions between the sections a bit.
The diff looks like a mess, but this commit is mostly just moving
things around. There are also various grammar fixes incorporated from
review.
Reviewed-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
squash! doc: application: move build/run/debug docs after overview
Make this a bit less Unix-centric, changing the CMake invocation lines
to only use documented parameters that continue to work across all
CMake versions (-B doesn't work everywhere, and -H means "help" in
recent versions of CMake).
Handle some 80-column cleanliness. Add documentation about the search
key, /. Be a bit more explicit about the steps.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Now that the above sections more clearly define the behavior of
CONF_FILE, the section on writing a .conf can be cleaned up and made
into a simple primer on syntax.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fix a few issues related to the description of an application's
CMakeLists.txt file, and how that relates to its configuraiton.
Make sure the section "Application CMakeLists.txt" appears under the
parent "CMake" section, instead of on its own. The order in which
lines appear in the application CMakeLists.txt is important, and
that's not coming through clearly, so try to improve that. Document
how the values for BOARD and CONF_FILE are determined by
boilerplate.cmake here. Also document usage of KCONFIG_ROOT, as its
Kbuild-based equivalent is something that users ask about.
Merge some content from the following section "Application
Configuration" into the appropriate places, to keep the document flow
working. Add references in "Application Configuration" to definitions
provided previously in the document, for clarity.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Update the initial application overview and the basic "how to create
an application" sections for the CMake transition. This is worth doing
on its own, and also enables other fixes and improvements to below
sections.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Update the versions of tools used to generate documentation locally and
include a description of the message filtering now included in the doc
build Makefile (formerlly only done in the CI scripts).
Also, include the documentation docs in the developer guides to help
folks that want to contribute and generate docs locally.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fixed error introduced in application.rst (v1.8) along with a general
spelling check pass including consistent spelling of "runtime" and
hyphenated words with "pre-"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Simplify top-level table of contents and create the user guide which
includes the application development primer and other guides and
refereces instead of having them at the top-level.
Also move glossary section away from top-level TOC and remove broken
search link.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add cross-referenced information on the 96b_carbon and
96b_carbon_nrf51 pages which disambiguates between the two "boards".
Also describe how to flash 96b_carbon_nrf51 with
samples/bluetooth/hci_spi and 96b_carbon with samples/bluetooth/ipsp
to support a Bluetooth HCI stack on 96Boards Carbon (the physical
board).
While we're here, make the documentation page for 96b_carbon match the
format in doc/templates/board.tmpl.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add a sample application that allows a Zephyr-based Bluetooth
controller to interface with an HCI driver via SPI. This sample
implements the same BT SPI protocol already as Zephyr's HCI SPI
driver.
Currently, the sample only supports the legacy SPI API.
Provide a single configuration file, avoiding board-specific
files. Some board-specific configuration information must be provided
via other means:
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_PIN
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fix :file: reference and add :ref: tag
to a mentioned sample
Change-Id: I46a66537b7cf7c89ba19e461f3a2872174cda33d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Commit 7cb8a16c86 ("doc: restructure application primer") removed
the section documenting the build system support for third party
libraries. Restore this section making a few editorial changes to
ensure the text sits well in its surroundings.
Jira: ZEP-1733
Change-Id: Ie62b956732f36fac70b392eeee880acebaef6cf9
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Updated main menuconfig image
Jira: ZEP-1434
Change-Id: Ib78f65868e025a45d51f1561f7e487eda0d7dbcd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-add board documentation and integrate into the project online
documentation.
Setup sphinx to pick any new board documentation added to boards/*.
Change-Id: Id208d5ef923f8806135879dd33a55ed527dc5f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
