move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move crc.h to sys/crc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move base64.h to sys/base64.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tty.h to console/tty.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move console.h to console/console.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Suppress warnings from deprecated header shims. Use when you have an
application that needs to work with older versions of Zephyr where
headers were located in different directories.
The shim will go away after two releases, so make sure to adapt your
application for the new locations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test the HW stack protection feature for threads that are
pre-tagged as FPU users, when building with support for FP
shared registers mode (CONFIG_FP_SHARING=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a short note in reference/kernel/other/float.
The note instructs to apply pre-tagging of ARM threads to
indicate that they indend to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under FP shared registers mode (CONFIG_FP_SHARING=y),
a thread's user_options flag is checked during swap and
during stack fail check. Therefore, in k_float_disable()
we want to ensure that a thread won't be swapped-out with
K_FP_REGS flag cleared but still FP-active (CONTROL.FPCA
being not zero). To ensure that we temporarily disable
interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit reworks the ARM stack fail checking, under FP
Sharing registers mode, to account for the right width of
the MPU stack guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For threads that appear to be FP-capable (i.e. with K_FP_REGS
option flag set), we configure a wide MPU stack guard, if we
build with stack protection enabled (CONFIG_MPU_STACK_GUARD=y).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread (i.e. with K_FP_REGS option)
transitions into user mode, we want to allocate a wider
MPU stack guard region, to be able to successfully detect
overflows of the privilege stack during system calls. For
that we also need to re-adjust the .priv_stack_start pointer,
which denotes the start of the writable area of the privilege
stack buffer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When an FP capable thread is created (i.e. with K_FP_REGS
option) we want to allocate a wider MPU stack guard region,
to be able to successfully detect stack overflows. For that
we also need to re-adjust the values that will be passed to
the thread's stack_info .start and .size parameters.
applicable) for a thread which intends to use the FP services.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Commit 212ec9a29a / feature #14121 already ordered partitions by
decreasing size, however it was common in samples/userspace/shared_mem/
/sample.kernel.memory_protection.shared_mem for two partitions to have
the same size and be randomly ordered between them. This adds the
partition name as a second sort key.
Unlike previous attempt in commit 725abdf430 this doesn't use the
partition name as the first (and only) key and doesn't break the
decreasing size order. Huge thanks to Sigvart Hovland for spotting this
in a post-merge but prompt code review.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This reverts commit 725abdf430 which did get rid of randomness in the
order of the partition _names_ as claimed but regressed commit
212ec9a29a / feature #14121 and broke the previous size order which I
missed. Huge thanks to Sigvart Hovland for spotting this in a post-merge
but prompt code review. Proper fix in the next commit.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Return value from close() can be ignored in sntp_close()
as it is not returning value to caller anyway.
Coverity-CID: 198863
Fixes#16584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds the necessary bits to utilize the x86_64 toolchain
built by sdk-ng for x86_64 when toolchain variant is either
zephyr or xtools. This allows decoupling the builds from
the host toolchain.
Newlib is also available with this toolchain so remove
the Kconfig restriction on CONFIG_NEWLIB_LIBC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The libc hooks for Newlib requires CONFIG_SRAM_SIZE and
the symbol "_end" at the end of memory. This is in preparation
for enabling Newlib for x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This new SDK:
() Fixes an issue with i586 toolchain where no coverage data
would be produced;
() Adds a new x86_64 toolchain for building x86_64
targets, decoupling x86_64 builds from host toolchain;
() Includes MIPS toolchain;
() Reverts bossa to older version to fix flashing issues;
() Turns on multilib support for RISC-V; and,
() Updates OpenOCD for TI and some ARC fixes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix path for system_timer.h and loapic.h, we moved it to
include/drivers/timer/ and include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test needs trivial modification to account for new APIC timer code.
Eventually CONFIG_APIC_TIMER_IRQ, CONFIG_LOAPIC_TIMER_IRQ, etc. will
be consolidated into one CONFIG_TIMER_IRQ to reduce the noise a bit.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is the "flagship" platform for the new local APIC timer driver.
The opportunity is taken clean up the configuration as well, so the
choice of local APIC vs HPET timer requires changing only one Kconfig.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The existing local APIC timer driver (loapic_timer.c) has bitrotted
and doesn't support TICKLESS_KERNEL, which is the preferred mode of
operation. This patch introduces a completely new driver, called
the APIC timer driver - the name is changed to allow the drivers to
continue to coexist in the short term, and also because "APIC timer"
isn't ambiguous (the I/O APICs do not have timers).
This driver makes no attempt to work with the MVIC timer as the
previous version did, because MVIC support is deprecated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Ignore the Emacs TAGS file generated by scripts/tags.sh. Move the
entry for the lower-case tags file to the correct section.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Dictionaries are not ordered in Python 3.5 and before, so building twice
in a row could lead to a different partition order, different
build/zephyr/include/generated/app_smem_*.ld files and different
binaries.
Fix with a minor change to the "for" loop in the output function:
make it iterate on sorted(partitions.items()) instead of the raw and
randomly ordered partitions dictionary.
It is easy to reproduce the issue even without downgrading to an
obsolete Python version; pick a test like samples/userspace/shared_mem/
and simply change the code to this:
--- a/scripts/gen_app_partitions.py
+++ b/scripts/gen_app_partitions.py
@@ -159,10 +159,12 @@ def parse_elf_file(partitions):
partitions[partition_name][SZ] += size
+import random
def generate_final_linker(linker_file, partitions):
string = linker_start_seq
size_string = ''
- for partition, item in sorted(partitions.items()):
+ for partition, item in sorted(partitions.items(),
+ key=lambda x: random.random()):
string += data_template.format(partition)
if LIB in item:
for lib in item[LIB]:
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Dictionaries are not ordered in Python 3.5 and before, so building twice
${ZEPHYR_BASE}/samples/application_development/code_relocation/
in a row could lead to a different sections order, different
build/zephyr/include/generated/linker_relocate.d and code_relocation.c
and different binaries.
Fix with a minor change to three "for" loops in the output functions:
make them iterate on sorted(list of sections) instead of the raw and
randomly ordered dictionaries of sections.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
types.h was wrongly defining unsigned as signed and following
undefining it. This definition was not being used anywhere though.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Log all send errors, but don't try to call e.g. prov_send_fail_msg()
since that'll almost certainly fail as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 | Section 5.4.2.3:
"The Provisioner and the device shall check whether the public key
provided by the peer device or obtained OOB is valid (see Section
5.4.3.1).
When the Provisioner receives an invalid public key, then provisioning
fails, and the Provisioner shall act as described in Section 5.4.4.
When the device receives an invalid public key, then provisioning
fails, and the device shall act as described in Section 5.4.4."
This is also in Erratum 10395 which is Mandatory for Mesh v1.0.
The code was already rejecting the key, however that rejection
happened only after we had already sent our public key as response,
which got interpreted as acceptance by the tester (PTS).
Fixes MESH/NODE/PROV/BI-13-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Spec v1.0.1 Section 5.4.2.3: "If the public key was not
available using an OOB technology, then the public keys are exchanged
between the Provisioner and the unprovisioned device. For each
exchange, a new key pair shall be generated by the Provisioner and the
unprovisioned device."
This allows passing MESH/NODE/PROV/BV-12-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clear the callback list once generation is complete and we've done
calling all callbacks. This lets us use bt_pub_key_gen() multiple
times, which before this patch could have resulted in a corrupt linked
list.
Also remove redundant callback dispatching from bt_pub_key_gen() since
the function checks for the PUB_KEY_BUSY flag in the beginning, i.e.
there cannot be other pending generation actions at this point in the
code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update code to handle other users of the public key generation APIs
by fetching the current public key at the beginning of each SMP
session. This is particularly important if someone creates the (rather
odd) combination of Mesh and SMP where Mesh will regenerate a new
key pair after provisioning.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>