This option, if set, will add arguments to CMake whenever a new build
system is being generated.
It doesn't affect other invocations of CMake, such as when cmake(1) is
run in build tool mode to actually compile the application.
See the documentation changes for details.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adds a device tree nexus node to define which gpio pins are mapped from
the soc to the arduino header.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a device tree nexus node to define which gpio pins are mapped from
the soc to the arduino header.
The frdm_kw41z board excludes the arduino A0 pin because it cannot be
muxed as a gpio on the soc.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds board-specific configurations for the lpcxpresso54114 and
lpcxpresso55s69 to the spi_loopback test.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the high-speed spi instance 8 on the lpcxpresso55s69 board.
Configures pinmuxes and clocks, and updates board documentation
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr spi interface. It leverages heavily from the existing mcux dspi
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds spi device tree bindings and nodes for the lpc54xxx and lpc55s6x
socs in preparation for adding a new spi driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some tests assume that the counters are always counting up
without regard to their capabilitiy bits. So fix the tests
if those counters are counting down.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update west.yml to point to newer versions of fatfs, nffs, and mcumgr
to pull in fixes for using proper include files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Split Link Layer implementation uses 80 bytes more ISR stack
in comparison to Legacy Link Layer, hence increase the
required ISR_STACK_SIZE for the BBC micro:bit and other
nRF51 QFAA SoC based mesh and mesh_demo samples.
Fixes#20414.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As ISR stack size depends on application code, its best set
in the application's prj.conf file. Hence, remove it from
soc Kconfig files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This sample demonstrates BLE peripheral for ST BLE Sensor.
You can test button notification and LED service using
ST BLE Sensor Android application
Signed-off-by: Marcio Montenegro <mtuxpe@gmail.com>
If we ran out of net_buf's while sending, ignore the issue
and try to finish the test instead. Solving the "running out
of network buffers" case would require careful tuning of
number of network buffers, buffer size, upload speed etc. which
is difficult to solve with generic buffer count options.
The user should tweak mainly the CONFIG_NET_BUF_TX_COUNT option.
Optionally CONFIG_NET_PKT_TX_COUNT can be changed too. Information
about these options is printed to console after the test is finished.
Fixes#20315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds tests for reading and writing 16, 24, 32, 48 and 64 bits in
different byte orders.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds net_bug_simple_init_with_data which can be used to initialize
a net_buf_simple pointer with an external data pointer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ARM Generic Interrupt Controller (GIC) supports multiple interrupt
types whose linear IRQ numbers are offset by a type-specific base
number.
This commit adds a function to automatically fix up ARM GIC interrupts
in order to output a linear IRQ number that is offset by the interrupt
type-specific base number.
For more details, refer to the issue #19860.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The GIC-400 driver currently only supports SPIs because the (32) offset
for the INTIDs is hard-coded in the driver. At the driver level there is
no really difference between PPIs and SPIs so we can easily extend the
driver to support PPIs as well.
This is useful if we want to add support for the ARM Generic Timers that
use INTIDs in the PPI range.
SPI interrupts are in the range [0-987]. PPI interrupts are in the range
[0-15].
This commit adds interrupt 'type' cell to the GIC device tree binding
and changes the 'irq' cell to use interrupt type-specific index, rather
than a linear IRQ number.
The 'type'+'irq (index)' combo is automatically fixed up into a linear
IRQ number by the scripts/dts/gen_defines.py script.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Make sure we do enable size tracking with options that depend on the
size of generated binaries to be available.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shortens main() a bit and makes it easier to read.
Rename write_flash() to write_flash_node(), and let write_flash() be the
top-level function. Also move the looking-up of the /chosen properties
into the the various helper functions themselves, and shorten some names
that are clear in context.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the node/ordinal list a part of the header comment to make the
output prettier.
Before:
/*
* Generated by gen_defines.py
*
* DTS input file:
* rv32m1_vega_ri5cy.dts.pre.tmp
*
* Directories with bindings:
* $ZEPHYR_BASE/dts/bindings
*/
/* Nodes in dependency order (ordinal : path): */
/* 0 : / */
/* 1 : /aliases */
/* 2 : /chosen */
/* 3 : /connector */
/* 4 : /cpus */
/* 5 : /cpus/cpu@0 */
/* 6 : /gpio_keys */
/* 7 : /soc */
...
After:
/*
* Generated by gen_defines.py
*
* DTS input file:
* rv32m1_vega_ri5cy.dts.pre.tmp
*
* Directories with bindings:
* $ZEPHYR_BASE/dts/bindings
*
* Nodes in dependency order (ordinal and path):
* 0 /
* 1 /aliases
* 2 /chosen
* 3 /connector
* 4 /cpus
* 5 /cpus/cpu@0
* 6 /gpio_keys
* 7 /soc
* ...
*/
Also move the writing of the top comment and the node comments into
separate functions, to shorten main() and make it easier to follow.
Piggyback some minor comment-related simplifications.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
64BIT has no prompt. Assignments in configuration files have no effect
on symbols without prompts. A prompt means the symbol is
user-configurable.
64BIT is instead enabled indirectly through being selected by
BOARD_QEMU_RISCV64, which is enabled in the same configuration file.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gcovr is already a dependency in scripts/requirements.txt. The
visualization is different, but the functionality should be the same.
Tested with gcovr 4.2.
Relates to #17626.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
