The newlib of XCC requires linking to _gettimeofday_r() which
should have been provided by its own C library, but obviously
isn't. So we need to provide a dummy version to get past
the build error.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Newer XCC versions wrap unsigned int with UINT32_C(x)
in their own macros. However, the #include chain
usually does not contain UINT32_C(x). To make matters
worse, including stdint.h (where UINT32_C is defined)
in toolchain/xcc.h would cause the linker script to
contain a bunch of typedef which are invalid for
linker scripts. So define UINT32_C(x) manually.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Providing 'tmp', which was never updated, resulted in removeal of
subscriptions from the beginning.
Using the updated 'prev' resolves this.
Signed-off-by: Marco Sterbik <madbadmax00@gmail.com>
Reorganize write_regs() to reuse more code for *_BASE_ADDRESS and
*_SIZE, and get rid of reg_addr_ident() and reg_size_ident().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Start initiator immediately instead of scanning for device first.
If the host resolving list is used we need to go via scanner to resolve
the address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Based on this commit
| commit dd6186f299
| Author: Bobby Noelte <b0661n0e17e@gmail.com>
| Date: Sat Sep 30 18:24:46 2017 +0200
|
| boards: nucleo_f030r8: reduce kernel memory usage
|
| nucleo_f030r8 fails in CI because applications need
| more RAM.
|
| Reduce kernel memory used by stacks and ISR vector table.
|
| Fixes#3923
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Capture the value of the volatile variable outside the assert and use
the captured value in the assert.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The rf2xx driver needs GPIO driver to works. The RST, SLPTR and INT
are mandatory signals and driver uses DT to configure them. This add
the GPIO dependency on Kconfig.rf2xx file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Do not enable hardware accelerated checksum calculation by
default. It does not work for frdm-k64f and is causing
confusion among users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A directive to compile the system call handlers for the
watchdog subsystem was omitted from CMakeLists.txt, causing
the handlers not to be compiled and some issues in the C
file undetected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When building with Kconfig a symbol CONFIG_FOO is either undefined, or
defined to the integer literal 1. There are styles and use cases
where this is important, e.g. using "#if (CONFIG_FOO - 0)" which would
not work with a macro expanding to the identifier y. Use the standard
default definition instead of a special non-default one.
Also consistently use space rather than tab indentation within the
multi-line setting, and alphabetize the CONFIG_ predefines.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update sample.yaml file for ST7789v sample to also build with
st7789v_waveshare_240x240 shield.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Made the unnamed choice for ST7789V pixel formats named so that the
default value can be set in defconfig files.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make sure we close the pipe file handles after we are done, otherwise we
will end up with too many open file descriptors and crash...
Fixes#20974Fixes#21637
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original implementation left this function hidden in init.h which
prevented it from showing up in documentation. Move it to kernel.h,
and document it consistent with the other functions that allow caller
customization based on context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This enables LiteX PRBS random number generator driver
for litex_vexriscv board.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds PRBS ranom number generator driver for
LiteX SoC builder with its bindings.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
miv already had it defined, but let's shorten the names and use
them in the driver. This also adds it for sifive-freedom.
Signed-off-by: Olof Johansson <olof@lixom.net>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Added Kconfig option to conditionally compile in HCI command
parameter validation code.
When building a combined host plus controller application,
only validations in the host at the top level close to the
API caller is sufficient.
The controller validations are included in controller only
builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the NXP FTM PWM outputs in the board pinmux files based on the
DT_INST_* defines instead of CONFIG_PWM_* to match the pwm_mcux_ftm
driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the NXP FTM instances in the KE1xF SoC to PWM to match the
other SoCs/boards using the FlexTimer as PWM generator.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert the NXP MCUX FTM driver to use the DT_INST_* defines instead
of a mix of CONFIG_PWM_* and dts fixups. This simplifies adding new
device tree properties to the ftm nodes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Only emit a warning about changing PWM period for all channels of a
given FTM instance when changing the period from zero to
non-zero. This silences the useless warning issued at first FTM PWM
channel configuration.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
At the moment we have different images for
for Nucleo F030R8 and Nucleo F070RB boards,
the images have the same pixel size but different
file formats, e.g:
NAMES="f030r8 f070rb"
for i in $NAMES; do
file boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg;
done
boards/arm/nucleo_f030r8/doc/img/nucleo_f030r8.jpg: JPEG image
data, Exif standard: [TIFF image data, little-endian,
direntries=0], baseline, precision 8, 500x367, frames 3
boards/arm/nucleo_f070rb/doc/img/nucleo_f070rb.jpg: JPEG image
data, JFIF standard 1.01, aspect ratio, density 1x1,
segment length 16, progressive, precision 8, 500x367, frames 3
The nucleo_f030r8.jpg file is larger:
for i in $NAMES; do
ls -1 -sh boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg;
done
128K boards/arm/nucleo_f030r8/doc/img/nucleo_f030r8.jpg
40K boards/arm/nucleo_f070rb/doc/img/nucleo_f070rb.jpg
Applying simultaneous black/white threshold to the images
and comparing them with imagemagick tools shows that
the images have no significant difference.
for i in $NAMES; do
convert boards/arm/nucleo_$i/doc/img/nucleo_$i.jpg \
-threshold 80% /tmp/$i.png;
done
compare $(for i in $NAMES; do echo -n "/tmp/$i.png "; done) \
-compose src /tmp/diff.png
See also 'boards: arm: unify Nucleo-64 boards connectors image'
(https://github.com/zephyrproject-rtos/zephyr/pull/15926).
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Don't sleep 50ms after each received packet, sleep only when there
wasn't anything to receive. Otherwise data could get stuck for a long
time if there was more than 20 packets coming in per second. The
read() call on a TUN/TAP device returns only a single packet per call.
Also remove the call to eth_stats_update_errors_rx() because this else
clause isn't actually a receive error, we're just waiting for more
packets.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
The $srctree environment variable is already set to point to the Zephyr
root, so no need to do
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
in samples. Just
source "Kconfig.zephyr"
works.
(Things would break if $srctree was set to anything else, because every
'source' in the Kconfig files will be relative to it.)
Also add a 'mainmenu' title to the littlefs sample. It shows up at the
top of menuconfig/guiconfig. Source Kconfig.zephyr instead of Kconfig to
avoid overriding it.
As a sidenote, $(FOO) is better $FOO in Kconfig. $FOO is legacy syntax
that Kconfiglib only supports to be compatible with old Linux kernels.
$(FOO) uses the Kconfig preprocessor.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The current configuration causes the STM32 flash support always to be
built, even if an unrelated flash driver, by example the SPI_NOR driver
is selected.
This behaviour gets especially problematic (build failure) if the flash
hardware of the given MCU is not supported (e.g. STM32F2).
The suggested change should ensure that STM32 flash support only is
built when it actually is selected.
Signed-off-by: Marco Peter <marco@peter-net.ch>
When system going to sleep state, make peripherals go to state
DEVICE_PM_LOW_POWER_STATE which needs less time than state
DEVICE_PM_SUSPEND_STATE to save more power.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>