Calling 'make menuconfig' from an application will prepare
the configuration defined in the application (Makefile) and
will launch menuconfig with the correct configuration rather
than the default for the architecture.
Change-Id: I6c611ddaa23b67632c507291294a73b6c4283cea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed the existing API table to a list as it was done
in the Kernel Primer.
Change-Id: Ib0d7952c650316b414ac9258ab3c48e9f6c70c4e
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Lots of enhancements and bug fixes but primarily it fixes an issue
where checkpatch was reporting errors in lines that have not changed.
Change-Id: If141a294b92cbabd4ad8978a40168abb062aebfb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
will generate an extra file that specifies the maximum amount
of stack used, on a per-function basis.
Using a static stack checker the data can be analysed, for example:
http://dlbeer.co.nz/oss/avstack.html
Change-Id: I23bd8ce7c4516bd0c7ffb74504e6d379677f25f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
GPIO driver is initialized at pre-kernel-late level, if SPI does it too,
it will happen before GPIO (depends on the ordered list of
initialization). In order to ensure it gets GPIO initialized always
before SPI, let's set SPI to initalize at the next level: nano-early.
Change-Id: I6e34168c88fca0187a809bf5c7971492bd5acb5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This test fails with exception debug enabled. Make sanity pass again
while we debug this issue.
Change-Id: I0df279d2ec2f8fb29c30d25ec0d05da18e929964
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently when an unhandled exception or trap occurs, we don't know
specifically which one happened. The CONFIG_EXCEPTION_DEBUG option
installs handlers for various exceptions and prints out details
when they happen.
Change-Id: I4d3fe4544c3e2583c4f83b306b86ac0595d9ce0e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
SPH and SPO flags are not mutual exclusive, this way
they need to occupy different bit fields.
Added missing () around _in_ parameters of macros as well.
Change-Id: I6175231dddaca84a2a3190a5d0a388496a549baf
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Remove unnecessary bullets and replaced them with indentation.
Added articles and performed other edits for clarity, markup and style.
Change-Id: I390d04a6a3c20eabde2eb100cac4fc88a3ca8cc8
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The document was edited for clarity, style, consistency, grammar, and
spelling.
Change-Id: If1af5cfd8285bb13606a1bff257177521af7ab3d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The tables in the Kernel Primer are changed to lists. Making it easier
to update them. Other minor changes were done to ensure consitency.
The :c: and :cpp: markup has been fixed. When the documentation for a
call exists, then it is linked.
Change-Id: I8f389a0a0ca7c5fe904c0a1fa520e2e499f1001b
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Updates the 'gen_idt' tool to generate a bitmap of (statically) allocated
interrupt vectors that is linked into the final image in a manner similar to
the static IDT. The kernel then uses this bitmap when dynamically connecting
an interrupt vector, thereby preventing the dynamic irq connections
from clobbering the static irq connections.
Change-Id: I0a8f488408dad4912736865179f32f63ff1ca98f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds two new fields to the ISR_LIST structure (irq and priority) to allow
the decoupling of the vector ID and priority from the IRQ number at some
future time.
As a result of the addition of these two new fields, the gen_idt tool is
modified to both process these new fields as well as validate them.
Change-Id: I343dac68d99c78168a25b19784140f85d5db7578
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Refactor gen_idt tool to detect more errors as well as be both more clear and
easily expanded.
Change-Id: I035a0666871733cc670f64302a1e85be455550ee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a bug in the x86 IRQ_CONNECT_STATIC() macro that resulted in setting
the DPL for the interrupt to the IRQ priority level.
Note 1: Using a proper value for the DPL (instead of the priority) prevents
the corruption of the other IDT fields.
Note 2: The priority of the IRQ is completely ignored.
Change-Id: Ic9f59bd91db4b356263f533cc26a0168b1d236e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of using logic choosing between invoking find_lsb_set() and
find_msb_set(), mask out the unwanted bits and always invoke find_lsb_set().
This also has the side benefit of simplifying the error checking when DEBUG is
enabled.
Change-Id: I7f3e529ab3807b4433291197793e79e371d06ae3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When dyanmicaly connecting an interrupt via irq_connect(), interrupts must be
locked both when allocating a dynamic interrupt stub and when updating the
interrupt descriptor table (IDT) to prevent race conditions.
Change-Id: I9c68c1f73dda478880f1a32793a84cb6eb87735e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The galileo minimal footprint project requires at least 53 IDT entries
to accommodate the HPET. This is due to the current algorithm used to
map an IRQ number to an interrupt vector.
Interrupt vector = IRQ number + 0x20
Change-Id: I6de2cd72da631af04237615082823e7de65d8b22
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Edited file to have a friendlier tone regarding collaboration standards for the project.
Signed-off-by: Leona Cook <leonax.cook@intel.com>
Change-Id: I5e02b9d9065c3c9c4d96ed67215770167b9b94e1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The makefile has some options we do not have in Zephyr, so better
remove them to avoid any confusion and misconfiguration.
Change-Id: I35663261bceb741a28d35bdbe87df451aa298c86
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move Zephyr specific CFLAGS that depend on config options to
the Makefile where they can better be managed among other cflag
options.
Change-Id: Ia79a2f2def4f51857f6d661aa78e9fb7eb7a5e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building a sinle application, use the compiler option checking
macro, disable macro if running sanity checks to speed up build
time.
Change-Id: I63b17f4bd9fdff9030f1b2550ec8b05ee0bc2df2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not use micro_* or nano_* defconfigs, instead maintain platform
in one single defconfig and merge nano or micro support on top.
Change-Id: I0d5184f37865ed8312e516e48cf5a8584a287dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Originally, the config_whitelist was done on the platform level
ignoring any config options in the testcase. This change generates
the defconfig for all relevant testcases that have config_whitelist
and applies filters based on the testcase defconfig.
If we have many testcases using config_whitelist it might be a bit
slower, but it is more accurate.
Change-Id: Ie1e871e85f05196d04419d6cf9a87f9927bfbfd1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enhances the existing nanokernel context test application to
validate busy waiting.
Change-Id: I08cd74f74ed596f0baa30d879e1d98000b1d4c85
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provides a way for a fiber or task to busy wait for a specified
period of time. This is useful in situations where a delay needs
to be performed without switching execution to another context,
such as:
1) It would take longer to switch to another context and then switch
back again than to simply busy wait.
2) A delay is required by the kernel's main task (i.e. the nanokernel's
background task or the microkernel's idle task). This task is not
allowed to voluntarily relinquish the CPU because this would leave
the kernel with nothing to execute in its place.
Change-Id: Icbe28613014f659e9528893ae58f7b8008c18a61
Original-work-by: Jeff Blais <jeff.blais@windriver.com>
Further-adapted-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change-Id: I0ae05d1b9f871b7b832581552442409233cdec5e
Original-work-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
run make initconfig to only create the .config in outdir.
The .config will be the result of the defconfig merged with the local
application config define in CONF_FILE.
Change-Id: If2a308ac3805d32cea8dd7be7a14772f22443600
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test takes too long to run, do not run it on multiple
platforms of the same architecture.
Change-Id: I3f121cfd22b99f3910fcbb9ef45a53b0abf79360
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently useful only for Galileo.
Change-Id: I8d4fafd530e11a50f91cedd0de1691393f270b9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Setting up the right SPI port, its configuration and max frequency.
Also, setting NANO_TIMEOUTS by default as it is required for delayed
operation inside ADC's driver.
Change-Id: I63b2b872ff858f1d80065a94ba3e2f303d279a67
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's an SPI driven chip and proposes up to 8 channels for input
conversion. It's found on Galileo board.
Change-Id: I916367e9be0849812c6a509082a501730a01ce60
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- making bswap_16 and bswap_32 for both
- adding sys_be16_to_cpu, sys_cpu_to_be16, sys_be32_to_cpu and
sys_cpu_to_be32
Change-Id: I3aacc91590ee584d83c512d78a9287380969d9aa
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Taking the opportunity to set simpler driver names for port 0 and 1.
Change-Id: I994bc43daaf6bc43b0dad564a72577c874f72d2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It might be needed sometime to get some private data forwarded to the
callback, thus such user_data pointer is the easiest way to proceed.
Adding a macro to set the word size as well.
Change-Id: I68cbe2d480120253ccb13f13c656a38c27e21604
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If those are not set it means the controller has nothing to request
anymore from the driver.
Change-Id: Ie7e834e82b931e4b02ded3f9f619735b31b0a121
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the driver is the only one needing those, no need to expose them
anywhere.
Change-Id: Iac4eaa65a9dbdaa8e72c70ea0de35cd2b3d836d1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
At this points the slave is ready to deal with the master.
Change-Id: I815d3c577bd0b73100cbf585cc8ca78f180ec713
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was failing, the documentationg provides numbers only telling at
one places these are hexadecimal values. So switching to hexadecimal.
Then DDS rate retrieving macro was bogus, so fixing it.
And adding debug output about the DDS rate and the clock ratio.
Change-Id: I9cc414796fbd7f7123f1f406c6bce7ffacf641e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
*_PORT_1_* not *_PORT_0_* obviously.
Change-Id: Idefad40c25b4ad54d9558355daab224bc634c2e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Galileo SPI interrupt is of type level low, thus setting it to this
value in Galileo's defconfig and removing useless entry in Kconfig.
Change-Id: I90bcc74be1a957bf59912d6f8c2234cfa4fe2329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
