The BT_L2CAP_RX_MTU is counted starting with the BLUETOOTH_RX_BUF_LEN
variable, which doesn't include the BLUETOOTH_HCI_RECV_RESERVE
contribution (this would only be valid if we started subtracting from
BT_BUF_RX_SIZE).
Change-Id: I1ab3eaf8907946c56c2a9fe16b2074f3a3027a0f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_BUF_RX_SIZE is used for the RX buffer pool which is used for both
ACL data and HCI events. It should therefore not contain any
ACL-specific details. This patch removes the ACL header size from the
macro and instead makes taking it into account the responsibility to
the Kconfig option. Since buffer sizes are anyway rounded up to the
nearest multiple of 4 the default goes up from 70 to 76.
Change-Id: I41274d9131e7529d41c16bd66de95637fb150a29
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_RX_BUF_LEN shall not be used as RX MTU since it doesn't
account for ACL and L2CAP headers.
Change-Id: Ic3ebb4bd13d86a39174840f0ab625b66e863018a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add proper documentations for all of the callbacks that are part of
the bt_conn_cb struct.
Change-Id: Iabce1d08a84c3849307c436a2cc528edffc62242
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
ICS & spec compliance. CFC is mandatory post 1.0b spec where in
Aggregate FC shall not be used.
Aggregate FC is managed using FCOFF and FCON messages. This is for
the entire session which means that all the dlcs in that session
will be affected.
Implementation is done using binary semaphore wherein it will be
blocked when FCOFF is recieved and unblocked in FCON.
Once tx thread is scheduled then semaphore should be always available
until all the buf in queue is sent.
Change-Id: Ibfd2c4d033cef64c238ead83474f9e171572de1e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Bluetooth Core Specification v5.0, Vol 2, Part E, 7.8.12:
"The Supervision_Timeout parameter defines the link supervision timeout
for the connection. The Supervision_Timeout in milliseconds shall be larger
than (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is
given in milliseconds."
Let's remember that:
conn_interval is given in units N * 1.25 ms
sup_timeout is given in units N * 10 ms
sup_timeout_ms > (1 + latency) * (conn_interval_ms * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 1.25 * 2)
yields:
sup_timeout_n * 10 > (1 + latency) * (conn_interval_n * 2.5)
yields:
sup_timeout_n * 4 > (1 + latency) * (conn_interval_n)
Change-id: I30ac1d375a1baaa3e61f4c29b1165110599e1f7c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reduces stack pressure a little bit, and also paves the way for
introducing an application callback for accepting an incoming
connection parameter update request.
Change-Id: Ib02c14e27cbe34f85d663f36abd0597683ae1dc1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Core Specification Supplement v7 defines one new ATT error code.
Change-Id: I4fe5341a6bbc57fd73e5a12fcc4dc72b643eab35
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When receiving notifications we should be properly matching against
the remote address of subscribed peers.
Change-Id: Ibcba1101aac418fd02f9068667f84e8294aade07
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Properly document the various APIs exposed by hci_driver.h.
Change-Id: Ic8daba4956e4c5d2cc6597556b55ab5221495ad7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename the elements of 'enum at_cmd_type' in order to follow the
name spacing. Which should have prefix of 'AT_' for each elements.
This patch also involves the renaming, corresponding handler
function of 'enum at_cmd_type' with prefix 'at_' i.e 'cmd_start' as
'at_cmd_start'.
Change-Id: I722a25954163c06e131b94042c6a18e1e3458f6e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename hci_le_rand to bt_rand and make its parameter types compatible.
This also includes updating rand_get() to use size_t instead of
uint32_t & uint8_t.
Change-Id: I4d434dfbbaf339b1bc7b451d358d07a291dd0375
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller bt_rand() ties into the hardware which uses less memory
and is more power-efficient than using the TinyCrypt PRNG.
Change-Id: I7570d18f3e84dae3d5c2d3322b5d37cd3e8f3b6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having TX buffers split into numerous pools has the downside of
increased memory consumption. This patch takes the initial step to
consolidate these pools into a single one, saving about 248 bytes of
RAM for a basic configuration.
Change-Id: I449ba18b44a9a6af68e9a2c44f19a9286eb88b14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses sys_slist_get function to get node and automatically, if valid,
remove one from the list.
Change-Id: I4cee6fbb064bf9644efdb7e6771e702b1f08678a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fixes not supported now format specifier.
Change-Id: Ia01ea3fd18acfeed6f4a3899334911dac1b76643
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
HTML documentation shows misaligned text that may be a bit confusing.
This issue was caused by wrong indentation. Furthermore, board specific
instructions to build the image does not include any instruction header.
This commit fixes the above described issues.
Change-Id: Ie965e09f32f46a9d69aac28c4b389084f06b31b6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Updated the README.rst describing how to setup the document building
tools on an Ubuntu system (listing versions of tools) and how to
generate a local copy of the html documentation.
Change-Id: I4ca1a99a48709b2313c479487abf42480c5af035
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
make build process less verbose and enable 'make htmldocs' from the top
tree without a need for ZEPHYR_GCC_VARIANT to be defined.
Change-Id: I385667e3d240205913fa806b7481d5ed4e83fbc4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was missing and all kernel objects belong to this group.
Change-Id: I3c31b168ca984b7d44cc5614a2e2bd5cc492cf50
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Running documentation scripts on the top directory shifted all links one
level dowwn and is breaking all incoming links.
Use a script to copy all RST files into the doc/ directory before
running sphinx and keep structure intact.
Jira: ZEP-1579
Change-Id: Iccff068430e2ddb29e172cd8ae920475815d199e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove the convert_to_double function and use sensor_value_to_double
from sensor.h.
Change-Id: I92ef4219057f431917f4c8e9d46d4ee2074b423b
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Similar to what was available with nano timers in the original kernel,
allow a user to associate opaque data with a timer.
Fix for ZEP-1558.
Change-Id: Ib8cf998b47988da27eba4ee5cd2658f90366b1e4
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Added TICK_IRQ definition for CONFIG_PULPINO_TIMER and
CONFIG_RISCV_QEMU_TIMER
skip definition of HAS_POWERSAVE_INSTRUCTION for
CONFIG_SOC_RISCV32_QEMU, since it does not provide
power saving instruction.
Otherwise, not passing sanitycheck.
Change-Id: I2faa823226cd76d129d2bc3db961c9b862aaf784
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Added TICK_IRQ definition for CONFIG_PULPINO_TIMER and
CONFIG_RISCV_QEMU_TIMER
skip definition of HAS_POWERSAVE_INSTRUCTION for
CONFIG_SOC_RISCV32_QEMU, since it does not provide
power saving instruction.
Otherwise, not passing sanitycheck.
Change-Id: I43a5c5112d694efdc14c5a0bcb4cafdc196d2680
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
zedboard_pulpino
1) has a 16750 uart, which is compatible with the uart_ns16550 driver.
2) make use of the pulpino timer driver
Change-Id: Ifda710fc8dea547ada05bb42e604d7cfdff284d5
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The qemu_riscv32 board makes use of:
1) the uart_riscv_qemu driver
2) the riscv_qemu_timer driver
Change-Id: I413e3990a66bc62a0d15d82ebca6940b381fed43
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
tested with blinky, button and disco apps
Change-Id: I4b520d4f3e42c97e4a723747ce4a6c67ca9f1d18
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
added USED_RAM_SIZE and MAX_HEAP_SIZE definitions for
SOC_RISCV32_QEMU and SOC_RISCV32_PULPINO.
Otherwise, not passing sanitycheck
Change-Id: Ia32b12e1694dc472e9f7f9eb10c5f2e12e928c3a
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
