Only 1 TX buffer is sub-optimal for performance since the controller
would always have to wait for the host TX thread to give it another
buffer. Increase the value to 2 so the controller can keep
transmitting data without waiting for the host.
Change-Id: I4841a6c5010f294996d6fe0fe63260b848a6a437
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updated controller code to use NULL keyword instead of
using 0 for pointers.
Change-id: I5ebff53dfeeba670fb7afe4740596b2662eb0334
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
There may be use cases where input and output is in big-endian rather
than little-endian. Introduce a native big-endian API to avoid
excessive byte order reversals in these cases.
Change-Id: Ia7b3e01bb0a07c4560b23f60c2f615ec614eb431
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some use cases where all parameters are in big-endian. To
avoid excessive byte order reversals introduce a native big-endian
API.
Change-Id: I58fe9156c8819a3a43d715e70b6ba358bd2f844b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do this in preparation of a purely big-endian API (all three
parameters as big-endian).
Change-Id: I815f74549caffd5ac387b5bb84e5851aa96639b9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This avoids overpopulating the high-level bluetooth.h
Change-Id: Icab8500be92003aa45d837ff111a8d93689865cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Reset the state when error occurs
2. This patch avoids checking for the AT_STATE_UNSOLICITED_CMD state
as the loop exits with possix error. So check for at->state
AT_STATE_START is sufficient for loop termination.
3. Fix different sign warning.
Change-Id: I80a1ca582112f1783690ac8a4125036bb706705f
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch adds support to initiate audio connection from the stack.
< HCI Command: Setup Synchronous... (0x01|0x0028) plen 17 [hci0]
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 7
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x003e
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Change-Id: I4f4c0788760c9bdaf75651825511ff6bcd06df59
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch handles the SCO disconnection part also unref the connected
corresponding ACL conn.
Change-Id: Ic2de68560cfd7d847e6011578c4424e24800d2ac
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch renames the 'conn' variable to 'acl' which is reference
to ACL connection for SCO connection.
Change-Id: I5f0a60bc5d80de08fa5b963cf545c71552909401
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Expose LE Encrypt helpers to applications. If software-
based controller is compiled-in, then controller's AES
hardware will be used by the exposed helper interface.
Change-id: I2bac9dfa5ccb3dd50447079affb52d920ae5bd81
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>.
Now that we have all the requested attributes of the service, form
the response packet and send it.
This also renames create_attrib_resp() to create_attrib_list() since
it is basically creating the list of attributes based on the filter.
> ACL Data RX: Handle 256 flags 0x02 dlen 21
Channel: 64 len 17 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Request (0x04) tid 28258 len 12
Record handle: 0x10000
Max attribute bytes: 4096
Attribute list: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0004
Continuation state: 0
< ACL Data TX: Handle 256 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Response (0x05) tid 28258 len 23
Attribute bytes: 20
Attribute list: [len 17] {position 0}
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Continuation state: 0
Change-Id: I54ba00f7700cbb72182dce745d61f5281f83437a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add proper logging for errors in the same go.
Change-Id: I8bd4fa8d5b143e51024496bfba0056525ad35964
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move crypto related interface provided by the
software-based Controller bt_rand into separate file,
crypto.c.
Change-id: I9998a43fe45799b479969ca195f324199418b8c2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use explicit path while including internal header files.
Change-id: Ide80eb23007574a7362850173ac227943bda21d5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The current hci_driver.c contained all the software Link Layer
initialization code. To decouple HCI from the actual LL, most of the
functionality that is actually part of the LL has been moved to the
ll_sw folder, opening the possibility for future hardware-based LL
implementations.
Change-Id: I1b54d655568a4ec02409da2f1a0addb4d64beed0
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since this presents a risk of public Bluetooth address duplication in
the wild by compiling once with a particular address and then flashing
the same image to multiple devices, a decision has been taken to remove
that config option and replace it later with another mechanism.
Change-Id: I068db25b2996c2409630554b1819b6adc48226cd
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To present a common interface to both software and hardware Link Layers
the API in ll.h now lives in its own separate include/ folder.
Change-Id: I2b0ab0d11b47b9c35a5759bcc30f347e6c616648
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Retrieves the record specified by the record handle, go over each
attribute in the record and check whether the attribute is there
in the list provided in the request.
Change-Id: I8f09e0fbb7811a20bb25dc0029cd7c79a9345c88
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for future hardware implementations of the BLE
Link Layer, this patch introduces the BLUETOOTH_LL_SW
configuration option to specify that the default software
LL is to be built.
Change-Id: I8b9d5b5e0d2926d18f9e8c8f042a74326895bf95
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handles the ServiceAttributeRequest, populates the attributes to be
searched in the record specified by the record handle.
Change-Id: I3b702eaf05615f795d32aa30dbfaf91f5b2ce560
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Rename all LL downstream API calls from radio_ to ll_ so that they
reflect the layer they are actually targeting. Additionally they have
been moved to ll.h so as to expose a proper interface.
Change-Id: I4fb3946597920c9fafaacb6d87d34d83d75e8f27
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the H:4 packet type macros that were unused in this file.
Change-Id: If161ddbf2d3adb2871cadd76de0e6c3bb50a16db
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report as Bluetooth 5.0 compliant controller as there are
no mandatory features.
Rename PDU types as per the changes in Bluetooth 5.0
Specification.
Change-id: I1363e054eafd37c2bdca0f69b2638c7edb785787
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Bluetooth device address is 48-bit, added Kconfig range
field to restrict input to 48-bit hexadecimal value.
Change-id: I650343eab5809535137e164e783c9dd4f3e2a6f2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to set the Controller's company id and
subversion number.
Change-id: I3508aba18bf0b79fd423c7b4142b6fc57eaf55d7
Signed-off-by: Matthias Ringwald <matthias@bluekitchen-gmbh.com>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a Controller event that indicates everytime
advertisement event has been transmitted on air.
Change-id: I4722488bbfeca987e66983faf5b26467407a89c9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add ARG_UNUSED on rssi_ready local variable when the RSSI
feature is compiled out.
Change-id: I04f8f11cbc3530f7b85ffa72f27373e213b6e35e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Now that we have all the records which has the uuids in the
service serach pattern, take the handle of each of those records,
prepare and send the service search response.
> ACL data: handle 256 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 1]
SDP SS Req: tid 0x6b6f len 0x8
pat uuid-16 0x0100 (L2CAP)
max 256
cont 00
< ACL data: handle 256 flags 0x00 dlen 26
L2CAP(d): cid 0x0040 len 22 [psm 1]
SDP SS Rsp: tid 0x6b6f len 0x11
count 3
handles 0x10000 0x10001 0x10002
cont 00
Change-Id: I85ec8ee384d0bf8090265577ec3ef805e75d4766
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This may cause static analyser error such as the following:
Null-checking "tmp" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
if (tmp) {
Change-Id: Id04f8d052d8128003d5b91f7a8303940529ef261
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current nordic hal layer in ext/ requires additional macros to
include the correct files. This will be corrected in an upcoming version
of the hal layer itself but for now add the required macros so that
users can benefit from the hal peripheral code.
Change-Id: I95127d0a98d7e882fdc779f961718fa223d504eb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Support connection via SPI and keep I2C as the default.
Jira: ZEP-1698
Change-Id: I42a76131577a37429375364deb07e451107f5d81
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the riscv-privilege SOC family to account for SOCs supporting
a Platform-level Interrupt Controller (PLIC) as specified by the
riscv privilege architecture.
riscv-privilege SOCs supporting a PLIC have to implement the following
list of APIs:
void riscv_plic_irq_enable(uint32_t irq);
void riscv_plic_irq_disable(uint32_t irq);
int riscv_plic_irq_is_enabled(uint32_t irq);
void riscv_plic_set_priority(uint32_t irq, uint32_t priority);
int riscv_plic_get_irq(void);
Change-Id: I0228574967348d572afc98a79257c697efc4309e
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
added the riscv-privilege SOC_FAMILY, under which all
riscv SOCs supporting the riscv privilege architecture
specifcation shall reside. These SOCs shall notably have
a common base for handling IRQs.
Moved riscv32-qemu under the riscv-privilege SOC_FAMILY
Change-Id: I5372cb38e3eaed78886f22b212ab4f881ef30b3f
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The params command is not printing the arguments, which makes this not
so useful to verify how things work, so added it to the sample.
Change-Id: I2d71ee064f12c7353ba83144824ae46803e2ad39
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Since MSYS2 is far more stable, reliable, maintained and easy
to set up than MinGW as a Windows development environment,
default to it for the official Windows Getting Started guide,
including instructions to compile for both x86 and ARM with it.
Change-Id: Iaba61498b3b16a8ee1edbff953de16c275282c7b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
At present 'make flash' target for boards that support flashing with
OpenOCD works only with Zephyr SDK. This patch enables flashing
without Zephyr SDK as long as openocd itself is installed.
Change-Id: I4594d795225e54b7638839d590e4c0620f9ca88c
Jira: ZEP-1893
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The only copy of the release notes for releases prior to 1.6 is on
the zephyrproject.org/downloads site. Preserving the release notes
history in the git repo would be a good thing. Here are the notes
for 1.5 (more to come).
Also added an auto table-of-contents header to make it easier to
navigate.
Change-Id: Ibd8b5a8d3816f7f5c376216adc2d52bb9467214d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A recent mailing list question asked for clarify about
the duration and period parameters for starting a timer.
Change-Id: I9bf8dd93dbbb9bbb94c95c2d7072f446ea1d6b01
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
MSYS2 is a modern fork of Cygwin that is widely supported
and provides frequent releases and good support. It is
also the framework used by the official Windows Git port.
This patch adds MSYS2 support so that builds on Windows using
MSYS2 work properly.
Change-Id: Ia5743a410d1cff983a7aab37f8e3d8228cb8ae8e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: Ib04b6689c59d03328687b0b579e80012dbd2f853
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
