We incorrectly changed the state from FIN_WAIT_1 to CLOSE_WAIT.
This caused ACK be sent in CLOSE_WAIT state when the connection
was closed by peer. Sending ACK in this state is not allowed
according to RFC. The connection was still closed but slightly
wrong way.
Jira: ZEP-1961
Change-Id: Ie4aa6818128d4190230b679e26ac9630c7d45d69
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can open a TCP connection (just one at a time) by
using "tcp connect <ip> port" command.
Data can be sent by "tcp send <data>" command.
Connection can be closed by "tcp close" command.
Change-Id: I75aedd873a30575a6f742926b716afb7dbbfb92b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes, use separate variable so that we do
not need to do big-endian conversion multiple times.
Change-Id: I8874b427bd39dfa2d952034a2623c47544a644fc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-server no longer uses multicast addresses itself,
so the multicast address setting can be removed from echo-client.
Change-Id: Ieab069849ced8a850ada6e6618d625695819be8e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 router is added, then NET_EVENT_IPV6_ROUTER_ADD event
is generated. When router is removed, NET_EVENT_IPV6_ROUTER_DEL
is then generated. This is useful info if we want to have a generic
connectivity to outside of our local network.
Change-Id: Ia03958a071ceb998127894025c99ab72a8b648d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The multicast address setting in echo-server was not really
used for anything so removing it from the app.
Change-Id: I8069c670388702fc46ae2f31506c982caa28212d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the bind port is set to 0, then return the real bind port and
show it in the debug print.
Change-Id: If75b52bdacfc916329222d0d9e8aa4669e7a7160
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
- Rename struct net_l2_offload_ip to struct net_offload
- Rename struct field offload_ip to just offload
- Rename include/net/offload_ip.h -> include/net/net_offload.h
Change-Id: I3cd891c2b13e0e8f3ad1c66264f90b5031ae17c2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This provides a more direct call stack from the net_context APIs
to the offload driver functions, versus going through the current
offload L2 (dummy) driver.
Change-Id: Ia5a677d87f7b62f54b2702ce8ecfaf026f6f7c26
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This patch simply renames the NET_L2_OFFLOAD_IP Kconfig variable
to NET_OFFLOAD.
Change-Id: Ic8b1d004cbac09b7c636475aaed75b0a31e4be1c
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
At the moment CC2520 configuration options are selected inside "TI
CC2520 Driver RAW channe" submenu like:
[*] TI CC2520 Driver support ----
[ ] TI CC2520 Driver RAW channel --->
Make RAW channel depends on TI CC2520.
Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These are copied verbatim from the echo_server sample.
Change-Id: I56d1386144967177f889e12d4a173bfb6628f18b
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When route not found try with default router if it exists. Consider
default router as nexthop. If default router also does not exist
then drop the packet.
Change-Id: I56cc9e4a1432fc25687cbaea600bfe9cf5b1d51e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No memory leak but debug prints shows buffer dropped due to
NET_DROP verdict. Added TODO comments to support DAO ACK.
Change-Id: I32deb2e1d2eea98f19ef26ad429ba8d03ae13751
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When an intermediate node received DAO message, it should forward it
to its parent (if exists) and it ack to orignal DAO sender. But
dao_forward() function steals frag chain from original buffer. Src
and dst address pointers to original buffer are not valid to
continue in dao_ack_send. So cache them for DAO ACK.
Change-Id: I3a4df4837a133afe4e2badb183f729c37d267f63
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When DAO message is required to be forwarding to a parent addr,
only frag chain and iface is considered. But for newly created Tx buf
other metadata also required. In this particular case setting
inet type, ip header length. Also update checksum as dst address
is changed.
Change-Id: If0e0a52e943db66be4aeecb6d0e3b9d7c3f04f58
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Path lifetime exists at 6 byte in RPL Transit information. So after
type and option length 3 bytes should be skipped to read lifetime.
Change-Id: Ic90c3bd75e3c7c63ffe9be27c0d206fc8fd58604
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
NET_RPL_DAO_ACK Kconfig option was missed. subsys/net/ip/rpl.c has
functionality of this option. By default it is disabled. Enable it
if you want to know the status of DAO message.
Change-Id: If5ed86c9c8c6c62991fc92d2f1e2a35331811356
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If DAO message is not inteded to destination node then
intermediate node will forward original message with final
destination address. But verdict not passed properly.
Change-Id: If61c7b683b55b24b68f5235d0eee5ed60b611aef
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unref the buffer if net_context_sendto() fails to send.
Change-Id: Iaae81f3044ad7197974493018b873bb76b2c0760
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Two size_t variables were printed using %d which gave warning
if RPL debugging was enabled.
Change-Id: I6bc135c76a31da304e94af34ecd571163ddf2a0e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Selecting RPL will need to enable NBR cache support,
it is not enough just to select IPv6.
Change-Id: I8162497111354d0fa9e44564fa5cc5ee46110b96
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of simply dropping the packet if the destination IPv6
address is not ours, try to figure out if there is a route
to real destination and then re-route the IPv6 packet there.
Change-Id: I6b2a0d7096b3d7877b82b04f38e3a6e588587c11
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes an issue introduced by bab3aafa2d,
which changed the default value of UART_PIPE_ON_DEV_NAME to the same
used by BLUETOOTH_UART_ON_DEV_NAME. Due to this, the BTP and HCI were using
the same UART.
Change-Id: Ib59819e49610f28f4c89c0304d024bb1b6aa506a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables the temperature sensor in the fxos8700 sample.
Change-Id: I2b4c306d3c5528dc32d940476c00180b5df08187
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The fxos8700 driver was previously converted to use the generic
SYS_LOG_SENSOR_LEVEL. Update the fxos8700 sample to use it too.
Change-Id: I2ef02342ce3a25e8d3a3d1b13181872ca0abdc16
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The fxos8700 is primarily an accelerometer/magnetometer, but it does
also include a temperature sensor. Note that the temperature sensor is
uncalibrated and can only be used when the magnetometer is enabled
(magnetometer-only mode or hybrid mode).
Change-Id: I74c4ae68c30e0f9836caa70baed44ad8956b17ea
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This avoid having duplicated code for list manipulation in both LE and
BR channels.
Change-Id: I734635e8e51d4b826a3d45cda8551e1e509bd913
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is the port of the legacy/kernel/test_pend test case to
the unified kernel
Jira: ZEP-932
Change-Id: I81762b45ff7000ff9f6079c674b46d233b2645de
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Also recommend dfu-util on Mac OS, as it's the recommended flashing
method for Arduino 101 and 96Boards Carbon.
Change-Id: I91d5a8323330ee31cc2165336e4a0a7fdd23dbcf
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Now that dfu-util is a supported flashing method, make it the
default flashing option for Carbon when used via 'make flash'.
Change-Id: I0d2fb9a8cbb4324ea77f1c94ca5df6f1a51e67f6
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Add DFUUTIL_DFUSE_ADDR to the list of dfu-util environment variables,
which can be used to flash DfuSe devices (e.g. STM32 based MCUs).
Change-Id: I39fdc338f7f034376ce50b648b06f39fee3169a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
This fixes an issue found on automated testing. If IUT had no credits
to send data, the TX request was not queued, because -EAGAIN error was
not returned to bt_l2cap_chan_send (which was responsible for queueing).
Scenario:
1. IUT was out of credits
2. Tester requested to send some data
3. Credits was given
4. No data was sent
Fixes: ZEP-1896
Change-Id: Ie9d0945d1e6b628cd978ede8105b37b838a61f1a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Cleanup controller's root makefile and add folder level
makefile to have better control over dependencies.
Also explicitly include folder paths in c files to clearly
depict the dependencies.
Change-id: Iac7b3a86eff11082111049ba48559c74f6c4d3fb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the PDU related size definitions out of radio.h and
place it in pdu.h. This will remove hci's dependency on
radio.h.
Change-id: Idf9d7cdf7c60d74816ef2b093c4ae457df16e9a9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added conn-update command to btshell module to test
bt_conn_le_param_update Bluetooth API.
Change-id: I205df9ffc12a0ab062de5a779ab96bc91cbd9259
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Mark each PDU type explicitly instead of using BT_ATT_OP_CMD_FLAG for
this. For simple "error response or not" selection the command flag is
sufficient, but to prepare for support for enforcing both request and
indication flow control it's useful to easily look up the type of the
PDU.
Additionally, refactor the handler lookup to make the flow a bit more
streamlined.
Change-Id: I575848356934b6d636dcda8d10b7e7fde1095355
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reordered the commands in btshell to represent the logical
order of use. Moved advertise and scan before connect
command.
Change-id: Id64509e39848109a6df7ddb1306b6bd221b65c40
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the uint8_t members together to save 4 bytes for each struct.
Change-Id: I522be86397c57fd062018e409b65835912c6e7bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_conn_le_param_update returns -EBUSY when used in central
role if peer did not support LE connection parameter
request.
This commit allows a central role to use either LE
connection parameter request, if local controller supports
it, else use LE connection update.
Jira: ZEP-1773
Change-id: I72b9c77440459672fd50216a74ffcbd59c5f38f6
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added checks for latency and timeout changes requested in
bt_conn_le_param_update, to decide if connection parameter
update is needed.
Change-id: I9de9f566158c5ade808ed356cb90b27186aa0243
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
There's no need to be opaque about this. Use the right type and let
the compiler catch errors for incorrect assignments.
Change-Id: If745354f514cbecfe6c0d845ebeaf3b93208b9b8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
