Value 0xFF represents End Of Options marker in CoAP message.
Use #define than magic numbers in code.
Change-Id: I3bef21ea827987f7c2e670447ee20574cb6288ae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add timeout for packet and buffer requests. If there are no
buffers available gracefully drop the request.
Change-Id: I56fe2b606556149c83751aadc1c5eee7828a84a8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Bluetooth only cares about the actual payload so net_pkt can be unref
as soon as the data fragments are detached.
Jira: ZEP-2070
Change-Id: Id528d5440f42903378883f5e696b3f663bbfa313
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add config file to be used for testing KW41Z's IEEE 802.15.4 driver.
Jira: ZEP-2026
Change-Id: I7042c57ad33ff72b35d24fbf28085b99b2301726
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Implement just the OSA_InterruptEnable and OSA_InterruptDisable functions
as only these two are needed to build the XCVR driver.
Jira: ZEP-2026
Change-Id: I49e0cedd3a2553a59b667a2b9945db6b8d0be0d2
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Import the XCVR driver from Kinetis SDK, which is needed to setup the radio
on the FRDM-KW41Z board. Also import EmbeddedTypes.h and the OSAbstraction
interface, as they are needed to build the XCVR driver.
Origin: https://www.nxp.com/webapp/sps/download/license.jsp?colCode=KW41Z-CONNECTIVITY-SOFTWARE-LIN
Maintained-by: External
Jira: ZEP-2026
Change-Id: Iee0acb2320f7bec887d8d2342772dde18b11b12f
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Many OSes use values SOCK_STREAM = 1, SOCK_DGRAM = 2, apparently
inherited from the original BSD Unix, which introduced Sockets API.
These values are exposed as numbers in many places, e.g. with a
debugger, when printing just as numbers, etc., so use the above
common values to avoid possible confusion.
Jira: ZEP-2066
Change-Id: I0477abc79e2b43ef83f9fb11a66092f2b41f75fa
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The ai_flags, ai_socktype and ai_protocol fields are removed as there
is currently no use for them. These can be added back later if really
needed.
Reordering the fields at the same time which caused 4 bytes to be saved
in storage space.
Jira: ZEP-2065
Change-Id: Ida1dcfb6afed73733d3db9cf4d07e771d31ee314
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The dns_resolve sample application did not had project file for
two boards that the README file is talking about, so adding them here.
Jira: ZEP-2040
Change-Id: I68e825854a171b09d56df91ab80ce5d9349733f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The data fragments were stored in reversed order when the RX
data was saved into network buffers. This was caused by net_pkt
changes in commit "net/net_pkt: Fully separate struct net_pkt
from struct net_buf".
Change-Id: I8ad2cfc23b2cb90896b0548eab168895b0d7421d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of just plain assert, check that the packet we receive
is ok before passing it to processing function.
Jira: ZEP-2057
Change-Id: I5754c82d16e1522d8fcee561eea280eadeec31ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP trace values were not printed because of incorrect
config option used. Print also seq and ack values in decimal
in order to make it easier to correlate the values in other
prints in tcp.c.
Change-Id: I44d1535a84dcba8c6c937d348516ba801193ca23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use ready-made utility function which can take care of endianness
Change-Id: I1edd0b2ce1a086dd637e97308145f9b434e48a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds support for reading MAC address from I2C EEPROM.
Only chips with 7-bit I2C device address are supported.
Change-Id: Ibedc33e54e33bdb901840e104063e2f4752b9123
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Otherwise they are send as is and stripped by tunslip6, resulting in
malformed packets.
Jira: ZEP-2037
Change-Id: I1267b9ac956f3cd7aa3456ce20447ef97281d7a8
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When connect to diffrent router with the same gateway ip address,
need to clear arp cache when disable interface,
or it will use the wrong gateway mac address.
Call net_arp_clear_cache function replace to set arp_table 0.
Change-Id: Ib403a0c0030832ba48824db4d2d3fcb8add63d16
Signed-off-by: june li <junelizh@foxmail.com>
Add initial .shippable.yml for CI integration on github and related
scripts.
Change-Id: I095d125e780bba980e635e218205c8741e753a8e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The build process of the host tools requires fixdep, when prebuilt host
tools are enabled and no host-tools are available (i.e. after a 'make
mrproper'), the build would fail because of the dependency. So make sure
we point to the in tree fixdep binary when building.
Change-Id: I8311f870d90b32ba56c821bb8533379f57003a8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sphinx has a builder option that we can use to check links
(invoked with '$ make linkcheck' in the /doc folder)
Add some configuration tweaks to conf.py, and update the
Makefile to also use the nitpick (-n) option to Sphinx
if this linkcheck build option is selected (does much more
checking of internal references)
Change-Id: Ib413bc8d4195c72f1a8a4c345a5a722f88fad8b8
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
fixed using a :ref: instead of a hard link as well
Change-Id: I383ef137934f0c616b9a98159980b954ca1b8871
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This was more or less transplanted from old Viper codebase (Zephyr's
ancestor which supported paging) and adapted to current coding style.
Change-Id: I203e631f1dcd5f2fb4e9a2fa9339fc7521c7962d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Don't busy-wait in uart_stm32_fifo_fill(), this routine is supposed
to be called on IRQ, and the waiting loop was shown to interfere
with interrupt-driven UART handling.
The original problem mentioned in the patch being reverted ("it is
possible to evaluate the TXE bit *before* H/W has had the
opportunity to detect that data is being processed") may still
exist and may require handling in a different way. The most obvious
way is to replace "while" loop with "if", because STM32 doesn't
have multi-level FIFO anyway. But I was dissuaded to include such a
change as part of this patch, so it's left for future analysis.
This reverts commit 49c2858d94.
Change-Id: Ib27b53ba3a29b84c1a2dccff6d33f4118680cc19
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In tickless kernel mode, time parameter of _sys_soc_suspend is in
milliseconds. Based on the kernel mode use the correct
mulitplier to convert to seconds.
Jira:1821
Change-Id: Idf156f56ece79a82729ebb124d1552a5eeb69e25
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds changes to enable existing kernel and timer tests and samples to
be used to test the tickless kernel feature.
Updated samples/philosophers and tests/kernel/timer/timer_api apps
Run the tests using following commands
make pristine && make BOARD=<board> CONF_FILE=prj_tickless.conf qemu
Board could be any of the following
qemu_x86
quark_se_c1000_devboard
Jira: ZEP-339 ZEP-1812
Change-Id: I1530b19b79ddeb0e2181594caf15f3ac28ff51f4
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add tickless kernel support. Sets timer always in one
shot mode to the time the kernel scheduler needs the
next timer event. Uses mili seconds as the scheduling
time unit.
Jira: ZEP-1817
Change-Id: Ia2e63711cdd9d7d9c241b9ff08a606aa79575012
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add tickless kernel support. Sets timer always in one
shot mode to the time the kernel scheduler needs the
next timer event. Uses mili seconds as the scheduling
time unit.
Jira: ZEP-1818
Change-Id: I21ce037b571c4c6ff588033a15aa49624cba7a57
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add tickless kernel support. Sets timer always in one
shot mode to the time the kerneel scheduler needs the
next timer event. Uses mili seconds as the scheduling
time unit.
Jira: ZEP-1816
Change-Id: I85232b572759b9653c6396edc057ff4409525c97
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Update the timer to use the tickless kernel interface
provided by kernel to operate in event based mode. In
this mode, the timer would not generate periodic ticks
and would only be programmed in one shot mode. It would
announce elapsed time in wall time units instead of
ticks. Timer can also be disabled enabling waiting
forever for a non-timer event.
Jira: ZEP-1812
Change-Id: I13110b9fb53b33a9244cc91a3d991f8452d330b1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Future tickless kernel patches would be inserting some
code before call to Swap. To enable this it will create
a mcro named as the current _Swap which would call first
the tickless kernel code and then call the real __swap()
Jira: ZEP-339
Change-Id: Id778bfcee4f88982c958fcf22d7f04deb4bd572f
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Scheduler needs to do time slicing only if there are multiple threads
active with the same priority. This function checks if the list has
more than one node. This would be used to check the list containing
threads with same priority for multiple nodes.
Jira: ZEP-339
Change-Id: I8c7daf77a6540c642ce58a3763b26cd1e06ddc30
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Sys log already break a line after each line, by default, so removing
the '\n' on log messages.
Enabling support for sys log colors.
Change-Id: Ica3a601aba0bbbd2d9438b41fb7bca0aad9c05f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Don't return without freeing the session when relevant.
Change-Id: I9e5903791f8eb54026c4bb2ddda9f1fe9f3f7bb3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If setting up crypto context fails enough times, the sessions will all
end up "in use" though they will not. This will lock tc shim driver
altogether and no crypto context will be possible to run on it.
Change-Id: I72346854e52294f96afc32f30ac5bfd0c368812b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thus it is possible to reduce or raise such amount relevantly if
required.
Change-Id: Ib53131e10e69fcbf1bcd9d844703d5b8832ee224
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All existing log entries add a line break, so let's just use the sys_log
way.
Change-Id: Ia94efa593700e9590e16b51262f0b5a2fe10ffa2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need of 2 level status reporting, returned code from
synchronous call or the status code in the async callback should be
enough to tell why it did not work.
And this attribute is anyway unused anywhere.
This helps to save 4 bytes, in total, out of struct cipher_pkt.
(3 bytes were lurking around as the status attribute was only 1 byte).
Change-Id: Iadfe20d6b84d57d86683bc86203ce2ed50e40461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As everywhere else in drivers, domain of driver should be used as name
prefix.
Change-Id: I1bb2284495c7a6b2648395b757a5f912e4410b15
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As it is a crypto driver, let's prefix all options with CRYPTO_ as it is
done everywhere else.
Change-Id: I1eccbf655417664a1f031a221081b0b1db673394
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
