The SPI API allows waiters to block until SPI I/O has completed. The
asynchronous subset of the API allows waiters to learn a status value
for the result of the I/O. However, the synchronous API does not allow
this.
Due to this limitation, synchronous API users cannot learn when
interrupt-driven I/O fails, which precludes proper error handling.
Resolve this limitation by adding a sync_status field to struct
spi_context, and using it to return operation results to the waiter.
Since there is only one status field, reduce the maximum number of
supported waiters from UINT_MAX to 1. This is not a problem for
current users, which all wait with the entire context locked.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Void pointer arithmetic is undefined behavior (UB).
It's OK for struct spi_buf to contain a void *, because those values
are only ever stored, read, and compared. However, pointer arithmetic
is done on the tx_buf and rx_buf fields in struct spi_context, so
those need to be u8_t * to avoid UB.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This is a convenience macro for getting the master/slave operational
mode, which will be used in a subsequent commit.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Print the entire memory areas of interest on error, instead of
stopping at the first null character.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This includes files for both polled and IRQ-driven I/O. The log level
is deliberately kept to ERROR to try to shake out any timing-dependent
bugs which go away with extra logging.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add SPI pin mux tables for 96b_carbon. Note that SPI1 is for
internal use on the board connecting to the 96b_carbon_nrf51, while
SPI2 is broken out to an expansion header.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
k_thread_cancel() is replaced with k_thread_abort() because
k_thread_cancel() is used to cancel threads that have not started yet.
Canceling asynchronous thread was returning an error.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
The parsing of strings with sharp notes (e.g. "100C#") was incorrectly
implemented. Now it should be correct. Additional benefit is that this
should fix Coverity CID 173632.
Jira: ZEP-2467
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For an accepted socket, we should set our receive callback and start
to queue packets ASAP (in the accept callback itself). Otherwise,
(if done in accept() call like before) we may miss to queue some
packets.
This issue wasn't exposed with slow SLIP and with emulated QEMU, but
easily exposed with Ethernet on a real hardware.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to define __LINUX_ERRNO_EXTENSIONS__ if newlib is being
used otherwise there is a compile error about ESHUTDOWN errno
value missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Fix typo'd "&&" when checking bit value
- Don't use NET_EVENT_IPV6_ADDR_ADD for checking mask value
due to combination of bits: _NET_EVENT_IPV6_BASE |
NET_EVENT_IPV6_CMD_ADDR_ADD
Instead use NET_EVENT_IPV6_CMD_ADDR_ADD so the check works
when NET_EVENT_IPV6_ROUTER_ADD is enabled.
Tested fix with echo_server on x86 qemu where it was previously
broken.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- sha256.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- mbedtls.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dsa.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dh.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cmac_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ccm_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cbc_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- aes.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced a test point with ztest API
- separated the main file into two:
- main.c, which has ztest entry
- xip.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- added a ztest test point
- separated the main file into two files:
- main.c, which has ztest entry
- multilib.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file already had ztest functions
- separated the main file into two:
- main.c, which has the ztest entry
- libraries.c, which has the original routines
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file does not use ztest asserts
- separated the main file into two files:
- main.c, which has ztest entry
- arm_runtime_nmi.c, which has the original routine
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- file already had ztest functions
- separated the main file into two:
- main.c, which has the ztest entry
- arm_irq_vector_table.c, which has the original routines
JIRA: ZEP-2382
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Sample code such as the adc_simple driver test set a sampling delay of
12, however that caused this calculation to underflow so the real
delay came out to more like 65534.
Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>
The existing check for the TargetA address in directed advertising
events was incorrect. In fact the specification states:
"An initiator that has been instructed by the Host to use
Resolvable Private Addresses shall not respond to directed connectable
advertising events that contain Public or Static addresses for the
target’s address (TargetA field)."
Hence, reject TargetA values that have not been successfully resolved
when the controller is generating its own RPAs.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The IEEE 802.15.4 settings are applied automatically by
net_app_init() function is is enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unlikely to happen but make sure parent neighbor exists when
probing it.
Coverity-CID: 173635
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no parent found with a specific dag, then we have
to check this in order not to access NULL pointer.
Coverity-CID: 173637
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parent is not found when adding DAG, then just return.
We must check the parent pointer as it can be NULL.
Coverity-CID: 173638
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to complex overflow checks that are error prone.
Coverity complained that the original diff check was always
false.
Coverity-CID: 173639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was dead code when handling IPv6 Hop-by-hop option.
The extra option value check can be removed as it is useless.
Coverity-CID: 173642
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about non-checked return values here. This is false
positive as the return values do not need checking in this special
case because we are closing the socket.
Coverity-CID: 173646
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about reversed src and dst fields when sending
DAO ack back to originator. This is false positive.
Coverity-CID: 173650
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check the return value of k_poll() as instructed by Coverity.
If debugging is enabled we print error if this happens, otherwise
this error is ignored. In our case the return value should always
be 0.
Coverity-CID: 173652
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is be possible that the local address was not properly
resolved in which case the local_addr variable could be NULL.
This will cause NULL pointer access if the variable is used.
Coverity-CID: 173656
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RPL route entry variable "extra" was resolved inside an
if-statement and the code was always returning from it.
This meant the the later code dealing with "extra" was never
executed. Fixed by moving the resolving of "extra" a bit
earlier so that the "extra" variable has always a proper value.
Coverity-CID: 173659
Coverity-CID: 173654
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TX send function will return status < 0 if there is an error
when sending. This status value was incorrectly checked.
Coverity-CID: 173660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This introduces an schema-based YAML validation process when loading
any YAML file, before doing any operations on them. An exception will
be raised at SanityConfigParser() if the file fails to verify with the
given schema.
Schemas are defined for the platform files in board///*.yaml and for
the (sample|testcase).yaml files. The verification is done using the
pykwalify python library. If not installed, a warning is printed and
the verification schema is skipped. At some point, we might want to
force it being installed.
The verification library is made a separate module (scl.py) so it can
be easily imported by others.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
