These can be computed from start/end values, but such
arithmetic can't be done when populating at build time
struct member values.
Some documentation has been added to explain exactly
what these symbols mean. It is intended for application
RAM to come first, then followed by kernel RAM and then
all unclaimed memory (also considered kernel RAM).
Obsolete _image_ram_all[] removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel data size shifts in between linker passes due to the addition
of the page tables. We would like application memory bounds to
remain fixed so that we can program the MMU permissions for it
at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was not working properly but only noticeable if the
sections involved were not preceded by a KERNEL_INPUT_SECTION
definition for the same sections (i.e. the application data
coming first in the memory map)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page faults will additionally dump out some interesting
page directory and page table flags for the faulting
memory address.
Intended to help determine whether the page tables have been
configured incorrectly as we enable memory protection features.
This only happens if CONFIG_EXCEPTION_DEBUG is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Request from Marketing and Linux Foundation to add a link to the Zephyr
GitHub repo on the documentation home page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Implement the LE Enhanced Connection Complete HCI event, but include it
only when controller-based privacy is enabled, since it is only relevant
with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since a connection attempt can fail and will still generate an LE
Connection Complete event, check the status from the LL control module
before incrementing the HCI connection count used for flow control.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This change fixes the prescaler values in the defconfig. The prescaler
values shown in the technical reference manual (STM32F407xx, p.19)
differ from those in the defconfig which results in wrong timer delays.
This patch corrects those values according to the manual. I tested it by
toggling a GPIO pin with different timer frequencies and run the
sanitycheck.
Signed-off-by: Andreas Kölbl <andreas.koelbl@st.oth-regensburg.de>
The Test ID was incorrectly being added as 4 bytes (size of a pointer)
instead of the intended 1 byte.
This fixes Coverity CID 173643.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Count of 4 seems to cause deadlocks with some Android phones due to
other GATT activity in addition to Mesh related data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The current 960 is at least too small under qemu_x86:
ecc stack (real size 1024): unused 36 usage 988 / 1024 (96 %)
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The previously used default value of 4 for the PPL_Q_DIVISOR results
in a frequency of 84MHz which is outside the acceptable range
of 47.88MHz to 48.12MHz.
The new value of 7 results in exactly 48MHz.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
The ouput speed of the gpio pins passed via the 'conf' argument was
ignored, causing the speed to always be in its reset state (lowest
possible speed for most pins). This was causing problems for pins that
actually need a speed faster than the default, like the ethernet
controller pins.
Combined with the correct pinmux configuration this fixes problems
of the olimex_stm32_e407 board not being able to send ethernet data.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Looks like post_ci is not executed when something fails and results are
not being posted. Duplicate code in both failure and success cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The nRF5 AAR requires the packet pointer to be placed exactly 3 bytes
before the beginning of the address. Since we don't use the S1 extra
length byte, substract one from the address of the radio packet pointer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The currently supported hardware in the LL requires big-endian IRK
values to properly function. Reverse the order of the IRK bytes coming
from HCI to address this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The nRF5's AAR was being improperly configured, leading to a NULL
scratch pointer which made it not function at all.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch removes the gen_idt subdirectory from the clean target as
this directory is no longer in use due to recent changes to the way the
gen_idt is generated.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Includes updates to Zephyr networking API feature list (also minor
tweaks to it not dorectly related to sockets), overview of BSD
Sockets compatible API, and basic API reference section.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>