Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the default Tx buffers to 3. While the first Tx-ed
buffer generates the HCI Number of Completed Packets Event,
the controller needs to have 2 additional Tx buffers queued
so that the second Tx PDU has the More Data (MD) bit set so
as to have the connection event to continue to transmit any
additional Tx buffers that the Host will enqueue in the same
connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This patch introduce version which fixes following bug:
It was possible to erase slot 1 while it stores confirmed image
while ongoing test run - this is unwanted behavior which allow
to even brick remote device accidentally.
This patch add check for such case of test run etc.
This also aligns condition required for erase command
execution to similar as upload command requires.
Origin: mcumgr
License: Apache 2.0
URL: https://github.com/apache/mynewt-mcumgr
Commit: 91a76b95b1b81aba06e30ee168e5ee5975cdfe93
Purpose: Bug Fix
Maintained-by: External
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
API for display drivers, supporting:
* Turning on/off display blanking
* Writing/Reading a bit map towards/from the display
* Requesting framebuffer pointer
* Setting display contrast and brightness
* Querying display capabilities
* Changing pixel format
* Changing display orientation
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
In order to fully cover the platform that supports most of the optional
features in the specification, whitelist the nRF52840 DK.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add i2c/spi/gpio to the supported list to enable the CI to correctly
run the 96b_argonkey board sample.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Before going further for API refactoring in console subsys, makes
sense to split "tty" implementation from "console" implementation,
to make it clearer that "console" is just a "tty" instantiated on
a particular UART device.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixed a bug in the OpenAMP sample's recursive build scripts, where it
would pass on the wrong board to it's second CMake invocation.
This fixes#10345
Fixed the same bug in ipm_mcux.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Allow application build scripts to pass extra flags to DTC, this could
for instance be done to enable/disable warnings.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
As far as testing can tell, all occurences of the "Node has a unit
name, but no reg property" warnings have been fixed. To prevent them
from re-appearing we turn the warning into an error.
This is a breaking change for out-of-tree boards that are affected by
the warning.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch is equivalent to 7b0ce85242,
but applied to buttons. As stated in the previous commit message:
This change aims at fixing 'unit_address_vs_reg' warning in arm based
boards. This warning pops up when a node name is made up with an
address (node_name@xx) but does not contain a reg property. This case
was encountered for led nodes for instance, where a reg property has
no meaning. Fix this by changing node_name@xx to node_name_xx which
removes the guilty '@XX' syntax but preserves node_name uniqueness.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The device name was missing for the lsm6dsl sensor in the 96b_argonkey
dts fixup, causing build warnings in tests/drivers/build_all.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The string parameter needs to be const as otherwise calling this
function using a const string pointer will lead to a warning.
Besides the function does not modify the parameter so should be
const anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows declaring the commands in any order which sometimes is
convenient when commands are conditional making it undesirable to
sort everything.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
added sam4s16b, sam4s8c, sam4s8b, sam4s4c, sam4s4b,
sam4s4a, sam4s2c, sam4s2b and sam4s2a.
Used the same order as in the data sheet and code structure
equal to same70. Updated the sam4s_xplained board to match
the altered .dtsi location of the specific SoC.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Fixed some Kconfig inconsistencies around THREAD_CUSTOM_DATA,
POLL and NUM_PREEMPT_PRIORITIES.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Group the entries by pin number and then sort them by alternate
function. This helps when editing the file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds timers and PWM nodes to STM32 F7 series, as well as the
corresponding dts fixup entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no guarantee of wake-up order when multiple threads
are woken up on the same tick. Hence, modified the tests
accordingly.
Fixes#8159.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The deprecation warning has existed for 1 release and 3 months, giving
users plenty of time to be warned.
This reverts commit 9c93e8e87b.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
