This shield uses a non-standard UART exposed via Arduino-R3
compatible header pins.
It has configurations for FRDM_K64F and nRF52840_PCA10056.
Signed-off-by: Michael Scott <mike@foundries.io>
Shields can often be very complex to setup in a generic way for several
boards to support. Let's allow shields to have their own .conf files
as well as specialized overlays per board (when needed).
Signed-off-by: Michael Scott <mike@foundries.io>
The label binding was missed during initial development of the
WNC-M14A2A modem. Let's add the binding so that during the
migration to a shield, we can update the DTS correctly.
Signed-off-by: Michael Scott <mike@foundries.io>
Assert is checking the array size of pinconfig. Not the actual
size of the structure.
Fixes issue reported by Github User @weinholtendian
Signed-off-by: Michael Scott <mike@foundries.io>
Caller will handle freeing packet if error is encountered.
Fixes issue reported by Github User @weinholtendian:
<err> net_pkt: *** ERROR *** pkt 0x20027e78 is freed already
by offload_sendto():1717 (context_sendto():1473).
Signed-off-by: Michael Scott <mike@foundries.io>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler generates errors of the form
error: "CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT" is not defined,
evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_IRQ_OFFLOAD" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_USERSPACE" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_STACK_POINTER_RANDOM" is not defined, evaluates to 0
[-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_ARC_FIRQ" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler generates errors of the form
error: "CONFIG_USERSPACE" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to if defined().
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
ARM SysTick peripheral is optional in Cortex-M0 MCUs,
so we delete the respective dts node when the peripheral
is not present.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Atmel SAM D series SoC variants (present in the tree) all have
an ARM Cortex-M0+ core, not a Cortex-M0, so we correct this in
the .dtsi header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Unlike Cortex-M3 and Cortex-M4, in Cortex-M7 the number of
MPU regions may vary based on the implementation. This commit
adds a DTS node for the ARM MPU peripheral in the device tree
of Cortex-M7 SoCs and updates the fixup files, so we may extract
the number of MPU regions at build time. SoCs:
- nxp_rt
- same70
- stm32f7
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a DTS node for the ARM MPU peripheral in the
device tree of ARMv8-M SoCs (for the secure and the non-secure
DTS descriptions) and updates the fixup files. SoCs:
- nrf9160
- musca_a
- musca_b1
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make _get_num_regions() return a constant representing the
number of HW MPU regions, defined in DTS, if such define
is available. This removes the need of evaluating the
number of regions at run-time. The ASSERT in arm_mpu_init()
is expanded, to cover that case, where the number of
regions is taken from DTS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add DTS binding files for the ARM MPU, for both ARM
MPU architecture variants, ARMv7-M and ARMv8-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In z_NanoFatalErrorHandler() we want to print the name
of the thread that has faulted, when building with
CONFIG_THREAD_NAME. This commit adds this functionality
for the Arm architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Put the symbols that depend on DISK_ACCESS_{RAM,FLASH,SDHC} directly
after the symbol they depend on, so that they end up in an implicit
indented menu. That makes it easier to see which symbols are related.
It also indirectly makes all symbols children of DISK_ACCESS. To save a
menu level, turn DISK_ACCESS into a 'menuconfig' symbol and put it in
the top-level menu. Change its prompt from "Enable Disk Interface" to
"Disk Interface", to be consistent with e.g. "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This will substitute the ZSH_VERSION in case it was unset or null. No
more error message will be printed when unset variables are treat as an
error.
Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
The typeof definitions in tz.h and cmse.h are not required
any more, as the ARM GCC toolchain intrinsics have been
modified to use __typeof__ directly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test for a proprietary HCI Vendor-Specific event.
In the test the controller is replaced with a small stub controller,
with limited support of the initialization flow from the host.
After initialization, a HCI prop event callback is registered and an
prop event is triggered and sent to the host. It is then verified that
the registered callback is called.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ACRN board configuration is not suitable for production use,
but many people are mistakenly using it as a starting point for
real-time applications. I've added a note to clarify.
Signed-off-by: Charles Youse <charles.youse@intel.com>
https://github.com/zephyrproject-rtos/ci-tools/pull/65 tweaks the check
for references to undefined Kconfig symbol to whitelist anything on the
form 'CONFIG_FOO_*' (or 'CONFIG_FOO_*_...'). This is meant for #endif
comments that talk about many related symbols.
Fix two existing #endif comments to use that format, so that some
entries can be removed from the whitelist in the CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The compiler was generating errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef] when -Wundef is used and the config option was turned
off. Change check to ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The compiler was generating errors of the form
error: "CONFIG_TRACING" is not defined, evaluates to 0 [-Werror=undef]
when -Wundef is used and the config option was turned off. Change
check to ifdef/ifndef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
