Rework the devicetree to utilize new DT_INST macros and extract per
instance data for clocks from devicetree.
We add a property ('calib-offset') for the SAM{D,E}5x family of SoCs
that is the bit position offset from ADC0 BIASCOMP in the NVM Software
Calibration Area Mapping. For ADC0 this is typically 0 and for ADC1
this will be 14.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add information on security vulnerabilities fixed in this release.
These CVEs are under embargo, and vulnerabilities page will be updated
when the embargo ends.
Signed-off-by: David Brown <david.brown@linaro.org>
Add a macro that represents a system-wide forever wait for millisecond
timeouts, and a second one that converts from ms to kernel timeout
units.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert old style ifdef(DT_NS16550_400F2400_BASE_ADDRESS) to
if DT_HAS_NODE(DT_NODELABEL(uart0)) to decide to config pins for UART0
and similarly for UART1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The hwinfo driver test currently filters for `CONFIG_HWINFO`, but this
symbol is set to `y` by the `prj.conf` and therefore will always be
selected.
This commit removes the unnecessary `CONFIG_HWINFO` filter.
Note that the hwinfo driver test `ifdef`s `CONFIG_HWINFO_HAS_DRIVER`,
and having an actual hwinfo driver implementation is not a requirement
(if no hwinfo driver is available, the test validates that -ENOTSUP is
returned by `hwinfo_get_device_id`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Convert ocram and sdram regions to use new macro DT_REG_ADDR() and
DT_REG_SIZE() with DT_NODELABEL to determine the various memories size
and base address.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In STM32 can driver CAN2 instance need to know the base address
of CAN1 instance which is referenced as master can.
Add this information as an optional property to stm32 can binding.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace use of CAN_X Kconfig symbols by access to dt instances
Control of enabled instances is now done using dts nodes status
field ('okay'/'disabled'). For boards supporting only can2,
can1 instance is disabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the missing prefix z_ required to make the ESP32 version override
the weak implementation.
General practice in ESP32 seems to be to use the MAC address, so
extract that in its canonical byte order.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The bounds check failed to account for the additional space required
for the terminating NUL after the encoded value was written.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Add __DSB system wide berrier.
Move the barrier macros to inline function header.
TODO: add more granular oneway barriers.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Use the new path access helpers to avoid hard-coding devicetree paths
in Kconfig, which is a bit messy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the compat2enabled and label2node maps in the global edt object to
speed up some functions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's a common operation to want to find a node based on its label. Add
a lookup table to make this easier.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
By defaut, only one uart is used as console.
Disable unused peripherals in dts to avoid
conflicts (issue #23475), save memory footprint,
and reduce the boot time.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Convert the code for setting the clock IP source of the various IPs
present in the NXP KE1xF SoC series to the new DT API.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In some cases terminate (SIGTERM) is not enough and we have to kill the
proces (SIGKILL), otherwise the process is stuck forever and taking
hours to complete and finally timeout in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were missing the reason and reporting 'Unknown',
check for failure and set the reason.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If timeout != K_NO_WAIT, then return immediately when not all
bytes_to_read or bytes_to_write have been transfered, but >=
min_xfer have been transferred.
Fixes#24485
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Update STM32WB HCI lib support to version 1.5.0.
Additionally provide a doc section to clarify compatibility
with stm32wb wireless co-processor binaries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add debug configuration to easily enable logging through RTT. Required
to use RTT since the UART is otherwise used for the h4 UART driver.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
The pinmux_mchp_xec is also being updated since it's using DT
from GPIO.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use instance macro's instead of dts_fixup.h based
macros. This moves us closer to removing both dts_fixup.h and per
instance Kconfig symbols.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
