Use MSI as PLL source. This enables to run system clock at 110MHz.
To achieve this, voltage regulator should be set to scale 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When MSI clock is used a source of PLL, it should be possible to
select its frequency range. Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added special flag that can be used to indicate that optional
arguments are passed without any parsing (e.g. quotation marks
removal). Modified execute command to parse command line buffer
argument by argument.
After this change it is possible to forward whole command to
command handler (using select).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During communication initialisation, the IMSI of the inserted SIM
card is evaluated to determine the APN. This is done by comparing
the first 5 characters of the IMSI to a list of known providers.
The list can be given in Kconfig.
To enable this functionality, set following bool in Kconfig:
MODEM_UBLOX_SARA_AUTODETECT_APN
To set a list of providers, set following string:
MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES
If the provider can not be found in the list, the APN given in
following entry is used as a fallback:
MODEM_UBLOX_SARA_R4_APN
Signed-off-by: Hans Wilmers <hans@wilmers.no>
The modem type (Sara R410 or Sara U201) is detected automatically after
hardware initialisation of the modem. Further initialisation and
functionality is then chosen depending on the detected modem type.
To enable this functionality, set following bool in Kconfig:
MODEM_UBLOX_SARA_AUTODETECT_VARIANT
Signed-off-by: Hans Wilmers <hans@wilmers.no>
This commit adds the initial implementation of the console driver test.
The purpose of this test is to verify the output functionality of the
various types of console drivers (UART and semihost console types are
supported for now).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The QEMU '-semihosting' option enables the emulation of the semihosting
mechanism that can be used to interface the Zephyr RTOS to the host
operating system.
In order to support semihosting console output, the QEMU semihosting
feature is enabled and its console is connected to the console backend
chardev.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Many chips have only one serial port. When the serial port is occupied
by other devices, there is a lack of a console to output debugging
information. Semihosting can provide a console. The disadvantage of
semihosting is that a debugger must be connected, so it can only be
used for online debugging.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add initial support for Decawave DW1000
IEEE 802.15.4-2011 UWB transceiver.
Driver has basic functionality. Additional functions such
as reading out timestamps and delayed TX were implemented
for test purposes, but also require support in the 802154
subsystem.
Register, sub-register, and defaults defines in the file
ieee802154_dw1000_regs.h are taken from the Decawave's
DW1000 driver for the Mynewt OS.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
OpenThread throws a warning when minimal libc is used, as some of its
new files use stdlib functions not available in the minimal
implementation. It's not critical failure, as those new functions are
not linked anyway in default configuration, but the warnings do not
look well. Therefore, use newlib by default in the sample to prevent
warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
To allow samples to obtain `ZEPHYR_<MODULE_NAME>_MODULE_DIR` it is
necessary to also ensure the module variable is available in parent
scope.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Map lpcxpresso55xxx type boards entropy device to rng peripheral.
Apllies to all versions of lpcxpress55s69 and lpcxpresso55s16.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Binding used for LPC random number generator hardware.
Describes RNG device node in LPC5xxx SoCs device tree peripherals.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.78 for CC13x2/CC26x2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This configures the nucleo_wb55rg board for testing
the SPI loopback with DMA MUX transfer.
This test requires pin SPI_A_MISO (D12) to be connected
to pin SPI_A_MOSI (D11) on the nucleo_wb55rg board
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch defines the dma feature for the stm32wbXX
and the dmamux feature for the stm32wb55x
soc series from STMicroelectronics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for ADC on H7 series. Note that ADC1 and ADC2 share the same
register set, so it is added as "adc1_2".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Like stm32 L4 does,
when the STM32WBx SoC goes into STOP mode, the SPI device is disabled.
This cause the pins to not be drived anymore (i.e. they are floating)
except through their pull-up or pull-down.
From the logical point of view, the NSS pin is held high by a pull-up
so it's not a problem if the other pins are floating. However those pins
are floating input for the slaves, which increase their power
consumption.
The solution is to hold the state of the pins through a pull-up or a
pull-down. This is already done for the NSS and MOSI pins, but not for
SCK. Fix that by using pull-down on the SCK pin the same way it is
already done for the MOSI pin.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Given that the Minnowboard has relatively large memory, the default
number of pages allocated for page tables are not enough, and
resulting in asserting in the page table initialization code.
So change the number of pages to a large number to accomodate
various applications.
Fixes#24353
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All pin configuration for ATMEL SAM SoC come from devicetree so we can
now remove the soc_pinmap.h header files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert i2s_sam_ssc driver to utilize devicetree. We replace Kconfig
options for specifying the DMA configuration (channel, DMA device name)
with getting that from devicetree. We also get pincfg from devicetree,
however we still have Kconfig sybmols to specify if the RF or RK pin is
enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert sam_xdmac driver to utilize devicetree. As part of the
controller binding we specify that dmas should contain a channel and the
perid for the DMA transaction.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The conversion in 9b096f40b6 left out a
few tidbits that were not converted properly. Complete the conversion
properly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH. This provides more flexibility to the user. This
requires we fixup in tree users to add semicolon where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
MCHP Soc operation uses clear-on-write register for interrupt
status, read-OR-write operation may clear interrupts unintentional.
Fixes#24464
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
We have a new heap implementation replacing mem_pool. Add docs on its
API and internals, and add a deprecation note to the mem_pool section.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The recent work with k_timeout_t has invalidated much of the existing
timing documentation. Rewrite the section focusing on the new API,
adding details on the internals and driver-facing API. Includes a
porting guide for legacy applications and subsystems.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
