Change the SimpleLink wifi driver to use static IP address instead of
DHCP when it is set by NET_CONFIG_MY_IPV4_ADDR. We also support setting
gateway and netmask via NET_CONFIG_MY_IPV4_GW and
NET_CONFIG_MY_IPV4_NETMASK.
This feature is tested out-of-tree against the echo sample after
modifying its prj.conf file to set the static IP address:
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.168.1.191"
and after commenting out these lines in its board-specific config
file for cc3220sf_launchxl:
so that the NET_CONFIG_SETTINGS are not overridden.
The wifi sample is also verified to run correctly after running the
echo sample.
Fixes#14588
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
In the conversion of net_pkt_read_new to net_pkt_read, we missed
changing the function in the eth_smsc911x and eswifi_offload.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit implements fcntl() in the SimpleLink Wifi driver to set and
get the non-blocking mode on a socket.
Fixes#11891.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This parameter was removed from net_context already thus applying the
change also on net_offload API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
mqtt_client_tls_connect() calls setsockopt() to set the TLS_PEER_VERIFY
option to require verfication. To enable mqtt, we need to return
success at a minimum when this option is set to 2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The driver is not returning correct error codes when error occurs.
The error handling function is expecting negative input values, but
that is not true for BSD error codes. So I am taking an approach
where I use a function to convert SimpleLink error codes to BSD
error codes, and call slcb_setErrno() to set the errno independently.
Fixes#12745
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
These symbols appear within an 'if WIFI' (in drivers/wifi/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SimpleLink driver has been defining these macros for its local use.
Given these have been defined in a recent commit in Zephyr
(9c86dbfd8e), we should now avoid
redefining them to prevent build errors.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
In the SimpleLink wifi driver, the socket family value needs to be
converted to the SL_* equivalent to be understood by the SimpleLink
API, instead of being passed straight in.
While not strictly necessary, we are doing the same for socket type
and protocol values to future-proof ourselves in case similar changes
happen to the values defined for these in Zephyr header files.
Fixes#13203
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Error code SL_ERROR_BSD_ESECUNKNOWNROOTCA is returned from sl_Connect()
when the root CA used is not part of the certificate catalog on the
network processor. We should warn the users about this and continue on,
given the connection is successful.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
simplelink_socket() is not returning non-zero socket file descriptors
when it succeeds. This leads to socket() to always return socket fd 0,
even when the network processor returns a non-zero fd.
This commit fixes simplelink_socket() to return the correct socket fd
when it succeeds in getting one from the network processor.
Fixes#12650
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Move to using the generated DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_pin and
DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_CONTROLLER defines and drop the
DT_ESWIFI0_CS_GPIOS_PIN & DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_PIN from
dts_fixup.hl
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The eswifi controller is capable of acting as an Access Point.
Implement ap_enable/ap_disable methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Create eswifi_at_cmd and eswifi_at_cmd_rsp helpers, allowing to send an
at command and parse the at response. These methods return success if
the response contains the OK* string. The eswifi_at_cmd_rsp method
extracts response content/size (DATA) on success.
*Response format is:
\r\n[DATA]\r\nOK\r\n>
Where DATA can be arbitrary (ASCII or not).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The SimpleLink wifi driver enables the Fast Connect method of
WiFi provisioning, which allows the network coprocessor to
reconnect to a previously connected Access Point (AP) on
startup.
Previously, if Fast Connect failed to connect, any network
socket applications would inevitably fail, as there would have
been no wifi connection.
This patch adds a configurable timeout for the Fast Connect
feature, after which timeout, an error is logged informing
the user to manually reconnect to an AP.
Reconnection is typically accomplished by separately running the
wifi sample shell program.
Fixes: #11889
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Samples for cc3220sf_launchxl where assertions are enabled
(e.g. http_get) fail to build because some of the strings used in the
simplelink wifi driver have parentheses around them. This breaks the
current implementation of the __ASSERT macro. This commit removes
the parentheses, which are unnecessary.
http_get has been verified to build after this change.
Fixes#12192
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The introduction of -fno-common caused a link error in eswifi driver due
to lack of missing extern on eswifi_bus_ops_spi. Adding the extern
resolves the link error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for blocking tcp receive (with timeout).
This patch removes dedicated socket polling thread to use common
eswifi workqueue instead.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Current implementation unconditionnaly performs blocking connect
and send. Add support for non-blocking version using eswifi workqueue.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
We were hard coding the SPI bus name to "SPI_3". Instead we should use
DT_INVENTEK_ESWIFI_ESWIFI0_BUS_NAME as its generated from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was using the straight alias generated defines, however we
want to use DT_ prefixed defines so its clear that the values are coming
from DT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a dts binding for the Atmel WINC1500 WIFI chip. Update the
quark_se_c1000_devboard to utilize this binding as well as the wifi
sample app.
We now get all the GPIOs related to the Atmel WINC1500 from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Check for case where host == NULL but service != NULL
could have resulted later in a NULL dereference.
Coverity-CID: 189516
Fixes#11090
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
es-WiFi compatible modules use IWIN AT command set.
This driver is split into several layers:
- bus layer: interface to transmit AT commands (SPI, USB, UART...)
- core layer: es-WiFi module management (state, scan...)
- offload layer: TCP/IP offload operations (connect, listen...)
This driver has been tested with stm32l4 disco iot board
(disco_l475_iot1) and the wifi sample:
$ select wifi
$ scan
$ connect "CISCO" 5 password
$ select net
$ tcp connect 192.168.1.21 4242
$ tcp send HelloWorld!
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Adding 'bsd' to the include path causes problems when gnuarmemb is
used. The wrong errno.h will be used in the build, causing unresolved
references to ENOTSUP.
See PR #10554 for more details.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This offloads the getaddrinfo() socket operation to the
simplelink WiFi driver, via a socket_offload hook.
This was validated using http_get on cc3220sf_launchxl.
Also implements freeaddrinfo().
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, '\n' in LOG_DBG statements were added to
improve readability, by ensuring IP address weren't printed
across typical console terminal line boundaries.
But with the logging updates, '\n' is no longer
getting automatically expanded to \r\n, and a new timestamp
is automatically added, throwing off attempts at alignment.
This patch finally just removes the '\n''s from the log messages,
and cuts a few longer messages into separate messages.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, the NWP (Network Coprocessor) was configured during
simplelink_init().
Since the SimpleLink "FastConnect" feature was added,
meaning an automatic reconnect can occur at this time, this
results in early callbacks into the network stack
before it was fully initialized, resulting in a NULL iface
ptr being sent in as argument.
Now, for safety, the NWP startup is moved later to iface_init,
where it more logically belongs.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The commit 8592501828
("net: Remove s_addr/s6_addr defines from in_addr/in6_addr")
did a (welcomed) removal of a #define s_addr for which the SimpleLink
SDK was checking, breaking the socket_offload driver build.
This patch fixes the driver to work with this new, better
s_addr symbol definition.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Adds getaddrinfo and freeaddrinfo to the offloaded API.
Signed-off-by: Joakim Andre Tønnesen <joakim.tonnesen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If the SimpleLink WiFi driver is configured, and socket offload
enabled, this revectors the Zephyr BSD socket APIs to the SimpleLink
WiFi host driver BSD socket APIs, providing a
direct offload of the TCP/IP stack to the CC3220SF network
coprocessor.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This enables the cc3220sf_launchxl to automatically
reconnect to the last good known access point (AP).
This method avoids the need to:
- perform a wifi scan for access points on bootup (saving power);
- include hard-coded SSID/passwords in the wifi application.
- include the wifi shell in the wifi application.
- rely on more complex provisioning methods;
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The wifi_winc1500 driver's socket id is stored in
net_context->user_data, which may be overwritten later at
the socket layer, which also uses the net_context->user_data
field to store socket flags.
This patch introduces a dedicated offload_context field
for use by offload drivers, and updates the wifi_winc1500 offload
driver to use this field instead of user_data.
Fixes#8820
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Place simplelink driver files into a subdirectory on par with
winc1500 subdirectory, to effect a better file organization.
No functional change in this patch.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Initiate a SimpleLink WiFi Driver, implemented to the WiFi management
offload APIs for scan, connect, disconnect.
Also registers the DHCP-obtained IPv4 address upon connect.
This was validated on a cc3220sf_launchxl using the wifi
shell module from the Zephyr shell_module sample.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
There will be other drivers, and mixing up all these files together will
create a mess so better having a dedicated place for winc1500, at least.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This cleans up the callback functions and isolate each part to a
relevant handler to improve readability.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This call is already made in nm_bus_wrapper along with SPI.
In nm_bus_wrapper however: moving the call out of #ifdefsf as it is
generic call, whatever bus would be choosen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no point having undocumented and local config options when
Kconfig can be used to expose these relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous way was cumbersome (based on an old way for cc2520 actually),
so moving towards the more recent and proper way.
This will enable anybody to actually provide gpio configuration for a
winc1500 out of any board specific location.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding support for WINC1500 WiFi chip.
It introduces the wifi drivers sub-directory.
It provides a Full-MAC for 802.11 and an offloaded network stack as
well. The driver uses Atmel's winc1500 HAL.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Exposing connect, disconnect and scan for now.
In case the iface is an instance of a WiFi offload device, the way it
manages scanning, connecting and disconnecting will be specific to that
device (not the mgmt interface obviously). In such case the device will
have to export relevantly a dedicated bunch of function to serve the
mgmt interface in a generic way.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help not to collide within drivers implementations and/or
avoid dependency from one driver to another one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>