If the UART FIFO is already full at the start of the irq tests (e.g.
because the data from the previous polled mode test is still being
transmitted), then uart_fifo_fill() may not not be able to add the
requested character to the FIFO and so return zero.
Fix this issue by repeating retrying uart_fifo_fill() until success.
Change-Id: I055ca1d4c91d81488b89f2a9b00031b9f2b8b222
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Updated tags to sensors in testcase.ini inside current_sensing sample.
Change-Id: Id2d5bfcbb1299ed6b1e386f774de46714669bf14
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
ADC driver sample is now using system log.
Change-Id: I44f5189b3beb09a14d87842c5968127460eda710
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-311
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Display text strings on parallel interfacing HD44780 based
generic LCD controller using GPIO pins to interface with
Arduino Due(SAM3). HD44780 is a popular controller and an
example can help using gpio pins in parallel with it. I
have tested it on JHD20x4 LCD panel for 4Bits & 8Bits
configuration. The code has been made generic so that user
can modify quite a few options.
Datasheets:
http://lcd-linux.sourceforge.net/pdfdocs/hd44780.pdf
Signed-off-by: Milind Deore <tomdeore@gmail.com>
Change-Id: If2809222466b462fa2f4c42b14a514828530f082
I2C_MSG_RESTART is not used in QMSI driver. What is really needed
here is I2C_MSG_STOP; Missing this flag is causing the issue.
JIRA: ZEP-398
Change-Id: I8fbfe15890c886ede4cce3d2cc68f53758a41e75
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Demonstrated sequence of flash API calls to show write and erase
operations with the use of flash_write_protection_set API.
Jira: ZEP-383
Change-Id: I36e5b94519dbdf424dcfbcf7f38e5cf6437da7b8
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver and port used are already configured per port, no need
to hardcode the sample to a specific driver.
Change-Id: I8056e35db1e0970ec4ad56ce14fe5654fac9cf3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- CONFIG_GPIO_DW_0_BITS is not longer available
- Use default printk
- Do not enable debug
- remove useless whitelist in testcase.ini, we already whitelist
boards
Change-Id: If21795d544e268c26a757b697ce3c9f2e56db65f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adapting GPIO samples to use the new callback format.
Change-Id: I944dce4faeeee30117edbd7a065e40caa0b7ed66
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use same string for driver name used for binding and fix
sample app to work with multiple drivers, not only DW driver.
Change-Id: I4d40aa9d4e83fcf16dc883bb74c3f0e3e30e3502
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some sample applications are using file naming .config which are
inconsistent from others. Changed them to .conf.
Change-Id: I2ea3944f3809671d4c6f4782dbf77fe9c2a22864
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Demonstrate the use of SPI flash driver API on Arduino 101 board.
This is a re-submit of a previous merged patch which was reverted
because merge sequence was incorrect (the test app got merged
before the driver).
Origin: Original
Change-Id: I3fce61488ed7d48f400c12448f1c7a01c555661c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This extends the pwm_dw sample app to build for
FRDM_K64F board also. Because of this, pwm_dw
has been renamed to pwm.
This allows us to put it through sanity test
to catch build breakage.
Change-Id: Ie4d7442af43ede58f4cec0ec28643384a685321a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary tags to enable building the grove_lcd and
i2c_fujitsu_fram sample apps, so that the Atmel SAM3 I2C driver
will be built to test for build breakage.
Change-Id: I4adfb6336e82a6d407bbd5e9888c27d5f6bc5be1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use SPI_0 by default or SPI_1 if configured differently.
Change-Id: I63f39f63a4b70fded3a7af8061058ba4779e573e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Also enable GPIO and add expected output to the README
Change-Id: I2117d53dc6f90394394c6a8dd9f308a01a110634
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
An example of button driver.
Change-Id: I8af860058166d7ca5653f50ff585bc9784008f78
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a sample program for blinking with GPIO connected LEDs. The sample
program by assumes the use of Nucleo-64 F103RB development board as the
target and will need to be updated for other platforms. The intention is
that the code will serve as an example of how to use GPIOs in one's
code.
Change-Id: Ia190a7ad5b07181731c9f502d87bd0ef0ba1abde
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Test application to test quark Always-on counter and timer.
This app requires QMSI lib which is not in the repo yet.
See the instruction in readme.txt.
Origin: Original
Change-Id: If75b2714f9b609abc6f7b51c1c0d99d15152399f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch introduces the i2c_stts751 sample application which
illustrates how to use the I2C APIs from Zephyr. The slave device
is the STTS751 sensor which is present in Quark SE devboard. So
no wiring instructions are required in order to get this sample
working.
The application reads the temperature register from STTS751 sensor
and prints the temperature value. This sample is specific to Quark
SE Devboard, but it can be easily extended to support any other
board with the STTS751 sensor.
Change-Id: I9b56aa73645d4741942fc793f1450c6a1c7beb29
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the uart sample so the same functionality (write
buffer, read char then write buffer again) is implemented using
irq-based APIs.
Change-Id: Iefb14dae2b253f90da64ccef8c123619ed494aca
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This adds an app to get the RGBC values from the APDS9960 sensor,
and drives one APA102C with those values. The app works on the ARC
side of Arduino 101.
Change-Id: Iaee7bd11c06b03cf3c69f8ccb84cdb649634bb6c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds a very simple UART sample application which demonstrates
how to use the UART APIs. This sample is also useful to quickly verify
if a given UART driver is working properly. For now, the application
tests uart_poll_in() and uart_poll_out() APIs only, but new APIs should
be added in future.
Change-Id: If815f358f11efb058e947291b234d3d4130581d8
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This reverts commit 1b1a9ef845.
This sample was merged by mistake and without the needed drivers
or APIs.
Change-Id: Icf588ed3517e9c2f905d319e6f6f5fff935aa77a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It should be made clear that this example is specific to the Quark SE
development board.
Change-Id: Ia3e0ec728891eb586bf1461ae9103ce34fd5e24f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The check was wrong and was checking twice for the QMSI version.
Change-Id: I7a73cc6523f141cae0e69b1a51791f6be87cb6de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch adds the wiring information to spi_lsm9ds0 README so this
sample app can also be used in Quark D2000 CRB.
It also fixes the SDA pin from Quark SE Devboard since it was wrong.
Change-Id: I24d4df15186ef111f728a21f137246cf933a8222
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_WDT_DW=y' so we rely on the platform's
default option for the watchdog driver. This way the watchdog sample
application can be built for different platforms without changing
the configuration file.
Change-Id: I4fa0f8e1f34a4608d602b6a5120fa1818b94aa6a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_GPIO_DW=y' and 'CONFIG_GPIO_DW_0=y' so
we rely on the platform's default options for the gpio driver. This
way the gpio sample application can be built for different platforms
without changing the configuration file.
Change-Id: I2480fee5fcd5463c39470c668c4438d83ecb786f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The current value for RTC alarm has been a bit annoying during RTC tests
since we have to wait 10 seconds to verify that the RTC driver is working
properly. So this patch changes the alarm timeout to 1 second.
Change-Id: I2ef2aaeb13a4f53c8ab294ffedc198e8f3ba92a7
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the gpio sample application so it can be used to test
GPIO functionality in Quark D2000 CRB.
Change-Id: I69fed701708a7268e1e5386a9dfde68fe6bb8160
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_RTC_DW=y' so we rely on the platform's
default option for the RTC driver. This way the RTC sample application
can be built for different platforms without changing the configuration
file.
Change-Id: I88fc7cc2f072406c9d774a9b4682439df94f3bbc
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the QMSI I2C shim driver so we are able to use it in
Quark D2000 based platforms. The only change required to enable this
driver is an #if guard in i2c_qmsi_init() because the macro QM_I2C_1
is not defined in QMSI headers from Quark D2000.
Since this drivers is now properly tested with Quark D2000, this patch
sets the QMSI driver default options in arch/x86/soc/quark_d2000/Kconfig.
It also adds the wiring information required to test the i2c_lsm9ds0
sample app in the Quark D2000 CRB.
Change-Id: I4be03c09304da5a66ac663e48b1d72225eb5651d
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch adds a new sample application to demonstrate how to use
I2C APIs. The application is very simple. It simply reads the 'WHO
AM I' register from the accelerometer in the LSM9DS0 chip and check
if it matches with the value described in the datasheet.
It also adds a README file which provides the wiring information
required to get the sample application working on Quark SE DevBoard.
Change-Id: I9162c030874c2718506b76519b255c9c11631802
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correcting the discovery method for SPI port. The current method is based
upon knowledge of a specific port and a *_DRV_NAME value. Instead this
should be based upon the use of the device_get_binding() for SPI_0.
Change-Id: I250f5dddf2a2e79c4714addf647b0c74bd79ec5a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
i2c_quark_se_ss and dw_aio_comparator are just build tests that
enable Kconfig options and do not do anything. We have real samples
for those drivers now.
Change-Id: Ia8c0a1801b967205cc1c116a0887b46a7dc5bbbe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
