This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a sample which implement Eddystone Configuration Service
following the spefication bellow:
https://github.com/google/eddystone/tree/master/configuration-service
Change-Id: Ia3e74d068de03ae20191534e61b2752dd2d70211
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add short description of each sample app to the README.
Change-Id: I830e48aad226b5bf08985fbb6c218e3b5fe72b15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_DEBUG_DRIVER provides too low level information to be
useful for samples. Remove it from default settings.
Change-Id: I9d99f9953d4e6b839eeb51ed393e4aed1eeeb01b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This adds a CTS service sample which can be shared with application
samples.
Change-Id: I38889f71f6ce8fc7b784d0d04af6c97408e2d662
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a BAS service sample which can be shared with application
samples.
Change-Id: I1f484dadf63b41632992454a40edd91077bb78fa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a DIS service sample which can be shared with application
samples.
Change-Id: I66f7a725139c8fa381275c3bda5e7c79fa3f09c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HRS service sample which can be shared with application
samples.
Change-Id: I1d2022ee7a6dfa46e2cae2d7c9d7924140d4fe37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces the amount of duplicated code across sample applications.
Change-Id: I20cf2e9f948f1420f234a58beb7f72ad74696cf8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_DYNAMIC_DB is defined it shall be possible for
the application to register any extra service it needs.
Change-Id: I7186f3faf45e9295e0c8b32dce030099a142c500
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the IP Support Service shall be instantiated as
a «Primary Service».
Change-Id: Ief0a2729c2752a33c8e7d4d9fae017c22e969e61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds indication support for one characterist of the vendor service
so it can be used to test bt_gatt_indicate API.
Change-Id: Ief058c93caf3e30972eca920c050451f6120543b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables use of ECC from TinyCrypt. Since ECC is heavy this option
is separated from general use of TinyCrypt in SMP code.
Change-Id: Ia550e4a5f89240c8e15d2b5acccc21993b44b471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force restarting advertising until nble is able to handle this by
itself.
Change-Id: Ife811eb69a63b98b3b0380b80e403d5d9dc10f22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to use pseudo random numbers generator provided by
tinycrypt instead of constant using of HCI LE Rand command.
HCI LE Rand commands are used only to initialize and re-seed PRNG.
Using tinycrypt for NRPA increase size of sample shell application
from 86852 to 89700 bytes.
Change-Id: I06e7392d087908caf37cd3ae648ea0bd5cc4ce61
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to focus on demonstrating a simple heartrate service.
Change-Id: Ib59c653ebe356784592c8468767b45c5240ec67a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
nble sample is a copy of peripheral sample which now has support for
testing nble driver so a dedicated application just for that is no
longer needed.
Change-Id: Ia8ea2262fc2472a54c81b90eb86d9c0d4b12f42d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These commmands don't have to return ATT error code, because
status BTP status is sufficient.
Change-Id: I5405bfbc0ad6fbac46eb3dab1ee63d3e18bf38fc
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds implementation of handlers for Configure Notifications
and Configure Notifications BTP commands.
Change-Id: I92c40836c09e145ea405226f321dd752ac16fc9f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds noifications and indications commands and event
related structure defines to the tester application.
Change-Id: I532ab6471d2e7671213bfa526e7261308dd4b2f6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enable seems to be more appropriate than Toggle.
Change-Id: I69ef509c47ddd7b76bc16684af60821328a7c647
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adjust printing bluetooth address in auth_cancel() user callback.
Change-Id: Ic39eeac36394d73eaee27c04bcad17e32704bbe7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
_next member, as the name suggest, is internal and shall not be used by
application directly instead application must use bt_gatt_attr_next.
Change-Id: I7c137eae555475d024098cd14a54d965cb397eae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Let us know that bt_enable() is successful.
Change-Id: I70581d950a9a922e809804bacfbfa039b2fec2fe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disabling ARC core allows to flash only lakemont and decrease unneeded
debug output.
Change-Id: Ifb913274302d7c69f1fb9c2e1747742d7a810627
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Test Nordic BLE on platforms which has support for it, at least we
need a UART configured to be connected to the chip.
Change-Id: I040fbb33436ae6bf973b521d52bf7b971993559a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed for GATT Server tests to implement larger attribute
databases.
Change-Id: Id160ac81b3e393697bdacd3e19033e9ff7c10fde
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses proper bluetooth address during printing to standard output
when monitors connected, disconnected and security changed states
based on established connection transport type.
Change-Id: I87b54ee619c329ffa645bfbb5e453cf673b93181
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no point in trying to connect non connectable device.
Change-Id: I1e3d8486db7cd7ca80f226ec3f4c36ab43f14a1a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This application only connects and disconnects to found devices.
Change-Id: Ic4d5cde52da37a369aa0583ec774c4dd116c6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes sure discovery UUID is a static variable so that it remain
valid once the scope changes.
Change-Id: Iaca9ab5d71f51e526dcd8439795e962bb359f9b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main purpose of sample app is testing H5 driver and catching
checkpatch build issues with H5 enabled.
Change-Id: Ia02cdcb38fc8f836de0e5f87b1afe428f7021673
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds very simple peripheral application that supports
Device Information Service only and doesn't support pairing.
Change-Id: Iaec1317a8894db11388408d3f65af8a38d1618c3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Multiple Characteristic Values command handler
to the tester. It allows to test if GATT Client can read multiple
values from a GATT Server.
Change-Id: I994ffac73eb8e6c0a7696dc41304efd9f01c35a4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Long Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client writes long values properly.
Change-Id: I788707b0a043ecad6be32d9e1f8d536765ebf41a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client performs write
operation properly.
Change-Id: I3afe167c7ca2789df7d288bbc06ffc8479240da8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Long Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can read long value from
a GATT Server.
Change-Id: I1c2060f7ecd45ca18ed5f9e0747121236b283631
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can perform read
attribute value from a GATT Server.
Change-Id: If95b8d2d3a5a62048bb6371ae80b2834c20d88e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Signed Write Without Response command handler to the tester.
It allows to test if GATT Client can perform signed write operation without
acknowledgement form Server.
Change-Id: I14757e6a52abf87bed68103b2e6fbff200fb6bb8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Without Response command handler to the tester.
It allows to test if GATT Client can perform write operation without
acknowledgement form Server.
Change-Id: I3663e2e01c0fabfd75e4bedab0955700e3003522
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristic Descriptors command handler
to the tester. It allows to test if GATT Client can perform discovery of
characteristic descriptors within specified range.
Change-Id: Ieb04b47168249d8d76eab840b4f54b8b6b450792
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Characteristics by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of characteristics based on known UUID.
Change-Id: Iab78ea7e5bc85e1fadc46b7e8f5b28ee4b9db16d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristics command handler to the tester.
It allows to test if GATT Client can perform discovery of all
characteristics contained within specified range.
Change-Id: Ib70abaf1365fe4a73757507148723e66881b01de
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Find Included Services command handler to the tester.
It allows to test if GATT Client can perform relationship discovery.
Change-Id: I76c12fcd5e79d906b4e29b926a82a2022e505c40
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Primary Services by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of primary services based on known service UUID.
Change-Id: If5788c6f23481c7b4af85834bf8b113a97a4b66d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of passkey entry command in tester
application.
Change-Id: I0624ee9f899102284490a82f5bb0a68bb342640a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of pair command in tester application.
Change-Id: I55545bdf99e2828c17ec716069e925940f15d019
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of setting io capabilities command in tester
application.
Change-Id: I21ae68633fb74d78db6e5622e1ee518ef0eed632
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds stubs for SM commands defined in GAP.
Change-Id: I5aef256ade5a100eb0a582c5d9bd5eb8d01611f2
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch separates helper for converting address type to btp
specific.
Change-Id: Ied723e01f5548b10e063a6771f8824c0c35b4682
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch removes redundant tester_rsp_full public function with
wrapped tester_send function.
Change-Id: Iba517ed194e02045ca952b00b952c7608592fbbd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
BTP Client received success response from the tester application too early,
so that next command was blocked due to pending ATT Request
Change-Id: I598c0e9e90984cac07f8b4ea265b0d6d69d3d18d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add command for choosing the default connection.
Change-Id: Id100320f31cb0e99ab48b162b466f52f6273018a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current MTU size was not sufficient to test GATT Client, where lower
tester requires to send data of length 512 +opcode +BT address.
This exceeds current BTP_MTU size.
Change-Id: I090c47975ecfe9a657d6ff1158b5dc764c8a78a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Both places in the central app that enable scanning should do
duplicate filtering.
Change-Id: If7086667c78878355dc246aa3d0b5ebcbdd0ac7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_br_* is equally understandable and the same length as the
corresponding bt_le_* prefix on the LE side.
Change-Id: I1820f9b9fab6363b696072f6b70d57c0bc780078
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data length was incorrect which caused the name to be truncated.
Change-Id: Ieaca7745fff89f0f5689b6d15bfc0386f59add47
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For test purpose pass NULL to bt_enable so it blocks until init
sequence is complete.
Change-Id: I875ff9a59bb3d1d2e799db6fc967da3aee3ac77a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Passkey should be entered with leading zeros so print them to avoid
user confusion. Due to printk limitation (no support for padding or
precision operators for decimal numbers) snprintf is used for
convertion.
Change-Id: I6e01f577c935147ec91038b6dce115fcd893ac99
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For testing IPSP application against a Linux host it currently need some
extra steps since 6LowPAN is not enabled by default.
Change-Id: Id491e31ef9ad6eebca7497705e874c01a5493589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application uses Bluetooth IP driver to listen to UPD port and
echo back the data received.
Change-Id: Id8e58f5f8bf58ff5947441cbcb3131c0da27081c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds structure definitions for SM related commands and
events. Structs are mapped with btp specification and will be used
within commands and events implementation.
Change-Id: I82231cdab62d170b86c548acc14ffdcbd888473a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Those are debug feature and were enabled by mistake.
Change-Id: Id49078fd4b910578af35dbe8660d148a691a4f13
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move btshell.h out of samples into include/misc and rename to shell.h
Move btshell.c into driver/console and rename to console_handler_shell.c
as an shell implementation based on new config
CONFIG_CONSOLE_HANDLER_SHELL.
Add shell_register_app_cmd_handler for an to app to optionally call so
that it can receive cmdlines not handled by the cmds registered with
shell_init
Change-Id: I5c1585e62ff7a0ee923c6c92833cc762cf912bad
Signed-off-by: Thomas Heeley <thomas.heeley@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling connect command in tester
application.
Change-Id: Ia35bcb33caf59b8df4a3cdc01c12d58fdeeecfe9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to display passkey and confirm if it matches remote
device.
Change-Id: I22f706b6441210ef426702ec290a05112e06a4e2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds missing connection unref in disconnect command. Also
lightly status setting was refactored.
Change-Id: Ic2502d8df15e45c4aea25632642af3d8a4fb23cc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds missing packed attribute to structures.
Change-Id: I9bcc8a677ae296e41eebb530584977660df52ebf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch extends Bluetooth Testing Protocol with commands used
while testing IUT as GATT client.
Commands are mapped to the procedures from Core Specification to make
use of Read Supported Commands command. Based on the response to this
command tester can determine which PTS test cases should be enabled.
If the IUT don't support eg. Reliable Writes, this command won't be
set in Read Supported Commands response, so that test cases that
test this functionality won't be executed.
Change-Id: I204a295698d4b69f73d0556b172770c4fd018009
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffer size is 512, so uint16 type shall be used to store it's length.
Change-Id: I5abaf7d783032ff41819f7b838d4016932dece20
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch separates helper for converting uuid received from btp
command to bt_uuid.
Change-Id: If7f5423a839379763928ba5e87678697b1721d83
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
IUT shall response with Invalid Offset ATT error code, if it exceeds
value length.
Change-Id: I5c7148c96324482f198332d475742bfb44274957
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The least significant bit of opcode is not used to distinguish between
command/response or events.
Change-Id: Icaa1b6d87968e095a7f231d43e74257f5acca379
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
There's no reason to depend on this config option, in fact it looks
like it doesn't even exist.
Change-Id: I3e072466700ca7115dfde5af09b08f98707062bb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This command will be used to add a descriptor to attributes database.
>> send 2 4 0 02000302cccc
Received: hdr: header(svc_id='\x02', op='\x04', ctrl_index='\x00',
data_len=2)
Received data (hex): 04 00
Received data (ascii): ('\x04\x00',)
> ACL Data RX: Handle 64 flags 0x02 dlen 9
ATT: Find Information Request (0x04) len 4
Handle range: 0x0004-0x0004
< ACL Data TX: Handle 64 flags 0x00 dlen 10
ATT: Find Information Response (0x05) len 5
Format: UUID-16 (0x01)
Handle: 0x0004
UUID: Unknown (0xcccc)
Change-Id: I64b77ce735e2dff10ae15290fb174b7f99876014
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This command is used by the tester to include service.
Service that is going to be included has to be already present
in the gatt database.
> ACL Data RX: Handle 64 flags 0x02 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 14
ATT: Read By Type Response (0x09) len 9
Attribute data length: 8
Attribute data list: 1 entry
Handle: 0x0007
Value: 01000500aaaa
Change-Id: I12e1790be946c3cf10105c66a852da1cb23cf4bd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch changes the way the attributes are added to the database.
From now, attributes will be registered one by one in gatt_db_add function.
This change is needed, because the handle of the attribute is assigned
in bt_gatt_register, and the tester application has to respond to the
command with valid attribute handles.
Moreover, Set Value command rely on the attribute handle, based on which
it looks for an attribute with handle spacified by tester to set it's
value.
Change-Id: I1f251f9bd5579bde2a52ebe3f1997da49c1b1721
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This will be needed to pass tests that require Insufficient Encryption
Key Size error response.
Change-Id: Ie358686d3a9843527e0c3dbd3918daed4e4d2f4c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The same opcode was used to Device Connected event.
Change-Id: I51640ed81822311817e82e43998c476795a28d49
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disconnect command is special since it is also used for cancelling
outgoing connection. Due to this is might be called with default_conn
set to NULL. To avoid conditional unref always pick extra reference
from default_conn for local use.
Change-Id: I59ad583becbf39a71366069d0307aa44f2c64174
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This simplify the handling quite a bit while the application can still
prevent the buffer to be freed by referencing it if necessary.
Change-Id: I5ed0e96e8d9e349b79ba31ba9568af61181e1065
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer received over L2CAP dynamic channels needs to be unref by the
application once they are done with it.
Change-Id: If210be1c538cf0b550dd03094d007b6851cdfbf4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to build sanity for both ARM and x86 archs.
Only supported platforms are enabled.
Change-Id: I499dbdee7b9df265affb2bba98b5bb100339fe18
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tester application requires 3 UARTs and currently no x86 based
platform supports it. For convenience default to arch that allows
to run, not only build tester.
Change-Id: I086e72a580f56d94181a6d6eada7693ddd24dec1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I98a0720483d3f364b77fe6dc030c9169aa4ade67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I4eb6cea592cce99dcc9e4c1b1219ebbf89eddd04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently it is only possible to build the tester for arm.
Change-Id: I7fd530ca09bfa41072420da774fba3b48a5d5a90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>