From stack_analyze function, used isr stack is 368 bytes
with the controller build, main stack is 288 bytes and idle
stack is 56 bytes. Hence, configuring sizes of 512, 512,
and 256 bytes for isr, main and idle stacks respectively.
Increased max connections from 16 to 20 utilizing the RAM
free from the reduced stack sizes.
Change-id: I67d073fd1893cafc53d36e89035a6fd931488a46
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch from fiber_start() to k_thread_spawn(). Also switch to
k_yield() from fiber_yield() in the same go.
Change-Id: I2dc480310f981112063651b61b0ceedf38601bee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_delayed_work.
Change-Id: Ie20fb47fc6d5c486ff885ad583354eb715d12c1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Currently the ideal buffer counts for a controller-only build are 6 RX
buffers and 7 TX buffers: ATT_MTU of 158 bytes can be sent in one
connection interval of 6 tx/rx -es wherein connection interval is
7.5ms
Change-Id: I64b4620c5e8e7db8d7ed72fa1db82e266e121f27
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant semicolon from the end of a while loop.
Change-Id: I02cef7879efe0d6eeae59595e14fb1d9b00a6d52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If support for the controller assert handler isn't enabled the
function shouldn't exist.
Change-Id: I72076eb1001980f102a0404c91d22e41582ced25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use a controller define if controller support is not enabled.
Change-Id: I837b3b66f010dfbdf2d9099acd85fa29fce954b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit doesn't have UART HW flow control, so it needs to be
disabled to build for the board. The baudrate is also lowered to
115200 since 1Mbps is likely to be unreliable without flow control.
Change-Id: I1725a2a1e46cfbc0f57b4f5c4ee57ff52d9670e9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix minor style issues with excessive whitespace for alignment and
lack of 'static' for the tx_fiber_stack.
Change-Id: I0c761e94e6a6789a3772b08b0774cd1a5e73c2ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Right now the hci-uart samples doesn't really work anywhere else than
nRF5x, so make that the default configuration. Also rename the old
prj.conf to generic.conf to give a generic starting point for creating
configurations for other targets.
Change-Id: I1c940339b457d0e77c8ddad4b2474fc7e5b12a51
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In 3 of our UART driver implementations the ISR is exclusively
used and enabled for the RX path. The existing logic was
susceptible to a stall situation where a polled out transmission
would be interrupted by a reception and then the ISR code
would loop forever due to the TX event being signalled (although
the interrupt itself was disabled) causing the ISR to keep
looping for an RX interrupt.
Change-Id: Ic379e58b1c974aca3cee37d2d81f12c3726fb160
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There's no need for this app to use the HCI driver API directly.
Change-Id: Ie5acfbfb09fc3f86c3f29f22fbf7da7db1ff2127
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a config file for boards using the Nordic Semiconductor nRF5x
ICs with reasonable defaults in terms of UART configuration and
controller settings.
Change-Id: Iaa5904c96c0f40a2749b7dda0398dd35fa809f24
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include zephyr.h instead which properly includes nano or unified kernel
headers.
Change-Id: I41c848092d022e2b0737ae6b2b53084eaf9bc6a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to the fact that ISRs run at priority 1, the LE_Rand
command was not being rescheduled after CPU sleep to be
able to fill its buffers. By performing all TX (to controller)
work on a fiber, the RNG ISR is able to run and the command
can be executed synchronously in the fiber context.
Change-Id: I3b658e1cab3f80ae655cc88566639a122a361a08
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add short descriptions for what the hci-usb and hci-uart applications.
Change-Id: Ie06cfa1678243e97b49e5594a00086cbf3c343be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a sample which implement Eddystone Configuration Service
following the spefication bellow:
https://github.com/google/eddystone/tree/master/configuration-service
Change-Id: Ia3e74d068de03ae20191534e61b2752dd2d70211
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add short description of each sample app to the README.
Change-Id: I830e48aad226b5bf08985fbb6c218e3b5fe72b15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_DEBUG_DRIVER provides too low level information to be
useful for samples. Remove it from default settings.
Change-Id: I9d99f9953d4e6b839eeb51ed393e4aed1eeeb01b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This adds a CTS service sample which can be shared with application
samples.
Change-Id: I38889f71f6ce8fc7b784d0d04af6c97408e2d662
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a BAS service sample which can be shared with application
samples.
Change-Id: I1f484dadf63b41632992454a40edd91077bb78fa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a DIS service sample which can be shared with application
samples.
Change-Id: I66f7a725139c8fa381275c3bda5e7c79fa3f09c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HRS service sample which can be shared with application
samples.
Change-Id: I1d2022ee7a6dfa46e2cae2d7c9d7924140d4fe37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces the amount of duplicated code across sample applications.
Change-Id: I20cf2e9f948f1420f234a58beb7f72ad74696cf8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_DYNAMIC_DB is defined it shall be possible for
the application to register any extra service it needs.
Change-Id: I7186f3faf45e9295e0c8b32dce030099a142c500
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the IP Support Service shall be instantiated as
a «Primary Service».
Change-Id: Ief0a2729c2752a33c8e7d4d9fae017c22e969e61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds indication support for one characterist of the vendor service
so it can be used to test bt_gatt_indicate API.
Change-Id: Ief058c93caf3e30972eca920c050451f6120543b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables use of ECC from TinyCrypt. Since ECC is heavy this option
is separated from general use of TinyCrypt in SMP code.
Change-Id: Ia550e4a5f89240c8e15d2b5acccc21993b44b471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force restarting advertising until nble is able to handle this by
itself.
Change-Id: Ife811eb69a63b98b3b0380b80e403d5d9dc10f22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to use pseudo random numbers generator provided by
tinycrypt instead of constant using of HCI LE Rand command.
HCI LE Rand commands are used only to initialize and re-seed PRNG.
Using tinycrypt for NRPA increase size of sample shell application
from 86852 to 89700 bytes.
Change-Id: I06e7392d087908caf37cd3ae648ea0bd5cc4ce61
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to focus on demonstrating a simple heartrate service.
Change-Id: Ib59c653ebe356784592c8468767b45c5240ec67a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
nble sample is a copy of peripheral sample which now has support for
testing nble driver so a dedicated application just for that is no
longer needed.
Change-Id: Ia8ea2262fc2472a54c81b90eb86d9c0d4b12f42d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These commmands don't have to return ATT error code, because
status BTP status is sufficient.
Change-Id: I5405bfbc0ad6fbac46eb3dab1ee63d3e18bf38fc
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds implementation of handlers for Configure Notifications
and Configure Notifications BTP commands.
Change-Id: I92c40836c09e145ea405226f321dd752ac16fc9f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds noifications and indications commands and event
related structure defines to the tester application.
Change-Id: I532ab6471d2e7671213bfa526e7261308dd4b2f6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enable seems to be more appropriate than Toggle.
Change-Id: I69ef509c47ddd7b76bc16684af60821328a7c647
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adjust printing bluetooth address in auth_cancel() user callback.
Change-Id: Ic39eeac36394d73eaee27c04bcad17e32704bbe7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
_next member, as the name suggest, is internal and shall not be used by
application directly instead application must use bt_gatt_attr_next.
Change-Id: I7c137eae555475d024098cd14a54d965cb397eae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Let us know that bt_enable() is successful.
Change-Id: I70581d950a9a922e809804bacfbfa039b2fec2fe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disabling ARC core allows to flash only lakemont and decrease unneeded
debug output.
Change-Id: Ifb913274302d7c69f1fb9c2e1747742d7a810627
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Test Nordic BLE on platforms which has support for it, at least we
need a UART configured to be connected to the chip.
Change-Id: I040fbb33436ae6bf973b521d52bf7b971993559a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed for GATT Server tests to implement larger attribute
databases.
Change-Id: Id160ac81b3e393697bdacd3e19033e9ff7c10fde
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses proper bluetooth address during printing to standard output
when monitors connected, disconnected and security changed states
based on established connection transport type.
Change-Id: I87b54ee619c329ffa645bfbb5e453cf673b93181
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
