This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add symbol which contains the number of bytes contained
in the image.
Using '_image_rom_end' will not work, as there are
symbols loaded after its value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
SetAddress request (0x05) is ignored and not propagated, because it
is handled by nRF hardware. Curently, request type is not checked
causing class or vendor request 0x05 to be inappropiately ignored.
Only standard requests (type = 0) shoud be ignored. This commit
fixes the issue.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
By using system include directive, we allow
the user to place external SEGGER_RTT_conf.h files to the
include path in order to override the zephyr version.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
1. Clarify message telling that the actual packet length fed by the
driver differs from what specified in IPv4 header, and that leads to
drop.
2. Debug log any dropped packets in general.
These changes come from the experience of developing a networking
driver, where figuring out why packets get dropped may require
quite a head-scratching.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If gPTP is enabled, then enable also PTP clock driver so that
gPTP sync starts to work properly for native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The PTP driver was init too late which prevented gPTP from
working in native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Extended logger suite to test correctness of reporting dropped
log messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended backend interface to allow notifying backend
that log messages has been dropped due to insufficient
internal buffer size. Notification contains number of
log messages dropped since last notification. It
is optional for a backend to implement handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch enables the UART_INTERRUPT_DRIVEN by default for
colibri_imx7d_m4, udoo_neo_full_m4 and warp7_m4 boards.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This patch fixes the uart isr calling the callback with wrong data
(#11465) and the uart_poll_in checking the wrong status flag.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
SYS_INIT instantiates a device struct, but this is really
just used to run some functions at boot, it does not correspond
to a device driver belonging to a subsystem. Don't put them in
the kernel object table.
These are easy to filter since they are all named with the
_SYS_NAME macro.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
DEVICE_AND_API_INIT() is preferred over DEVICE_INIT() since
DEVICE_INIT() does not set the API struct at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A couple references to the old PRIMARY and SECONDARY levels were left in
place when everything moved to the new levels.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a "nocache" read-write memory section that is configured to
not be cached. This memory section can be used to perform DMA
transfers when cache coherence issues are not optimal or can not
be solved using cache maintenance operations.
This is currently only supported on ARM Cortex M7 with MPU.
Fixes#2927
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Devices are identified as belonging to a particular subsystem
by looking at device->driver_api.
Print some debug information if this is NULL or points to an
unrecognized API struct.
This is normal in a lot of cases, for example any use of SYS_INIT().
However, for real devices this may be an indication of mis-
configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The comment explaining why _IntLibInit was being invoked was left in
place after the invocation itself was removed. Remove it too.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
A typo in the name of the bmRequest field in the nrfx_usbd_setup_t
structure was fixed in nrfx version 1.4.0. Update the driver to use
the new correct name: bRequest.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We are not expecting forever k_sleep in multithreading.
And k_sleep is empty in non-multihreading.
So remove invalid forever sleep to avoid the below issue.
ASSERTION FAIL [duration != (-1)] @ zephyr/kernel/sched.c:807
Please refer to _impl_k_sleep api in zephyr/kernel/sched.c:807
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Add configuration values for HAS_HW_NRF_BPROT and HAS_HW_NRF_MPU.
Select these configurations where applicable.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
If compiling with gPTP support for native_posix board, then avoid
compile error that is seen with gptp sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If USE_SEGGER_RTT option was enabled then LOG_BACKEND_RTT was
enabled by default. In case shell RTT was also used then both
write to RTT. Updated Kconfig to prevent such situation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fragmented long CTRL OUT transfers does not work properly, because
they were not handler properly by the shim. In such transfers,
a special call (nrfx_usbd_setup_data_clear()) must be performed
before every data packet and not just before the first one.
This patch adds a byte counter which is set while processing setup
packet (host->device only) to be able to decide whether there will
be more data packets coming (and to call_data_clear() or not).
Fixes#11232 .
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
If we receive extra data at the end of the IP message, then
discard that data and accept the packet.
Fixes#11649
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Sphinx ``.. only::`` directive is limited to handling only
conditional text and can't handling conditional use of directives
For example,
```
.. only:: test
.. automodule:: west.runners.core
:members:
```
is not handled. This PR monkey patches the handling of the existing
``.. only::`` directive done by Sphinx.
See https://github.com/pfalcon/sphinx_selective_exclude for details.
Licensing amended to Apache 2.0 with permission from the author.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
