Added bBreak, bRingSignal, bFraming, bParity and bOverRun
handling in cdc_acm_line_ctrl_set.
Reference: Chapter 6.5.4 of Universal Serial Bus Communications Class
Subclass Specification for PSTN Devices rev 1.2
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The CONFIG_ prefix is reserved in Zephyr, rename CONFIG_SHIFT and
associated constants by adding a RCC_ prefix
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Add configuration, pinmux, dts and documentation for the STM32MP157
Discovery board based on the STM32MP157 SoC.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The stm32mp1 exti ll driver is mandatory for compilation.
add it on top of stm32cubeMP1 version 1.0.0.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Provide required changes to stm32cube HAL and LL for the
STM32MP1X series MCU.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: https://github.com/STMicroelectronics/STM32CubeMP1
Commit: 1.1.0
Purpose: HAL layer for STM32MP1
Maintained-by: External
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Add the initial SoC support for the STM32MP1 family. The code was
tested on STM32MP157c, but should work on any STM32MP1XX currently
available.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
The comment for:
set_target_properties(${logical_target_for_zephyr_elf} PROPERTIES
OUTPUT_NAME ${KERNEL_NAME})
was completely off-topic and making something relatively simple
incredibly puzzling and time-consuming to understand.
Re-order the if(GKSF OR GKOF) clauses so the two initializations of
logical_target_for_zephyr_elf are close to each other and so the very
short clause is not buried at the bottom of the long one.
Other minor logical_target_for_zephyr_elf comment fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Sample code for AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Implementation of AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Sample code for AMS (Austria Micro Systems) Indoor Air Quality Sensor
reading VOC and equivalent CO2 values.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Mark the three distinct choices for how to program the board as
separate options, and add some clarifications on each. For the MCUboot
route, use smp_svr instead of blinky, to give the user a hint about
how to keep their devices up to date from application land.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This patch adds support to the nRF9160 for using a dedicated
GPIO pin to reset controllers running on nrf52840_pca10090.
It resets the controller before opening the H4 device, and it
delays the controller from booting until all bytes traveling
to the host have been received and drained from the UART,
thus ensuring that communication can begin from a clean state.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enable the GPIO reset pin feature of nrf52840_pca10090
on pin P1.02 and the wait NOP feature of the controller.
These are used to let nrf9160_pca10090 synchronize the
HCI communication with nrf52840_pca10090 controllers.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Let one of the MCU interface pins be configured to act
as a reset line. This mitigates the lack of a connection
between the nRF9160 and nRF52840 PINRESET.
Minor refactoring and updated comments.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The patch provides flash offsets appropriate for running
this sample on nrf9160_pac10090 targets.
As that sample is small one, it is done with assumption that image_1
flash partition is empty.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Write protection was not disabled prior erase call.
It used to work before only because nrf driver had not check
the protection before erase execution. This behavior was changed in
order to align to zephyr - which implied requirement for this test fix.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
nRF9160 can't provide FICR data while operation in non-secure
domain.
This patch start using flash layout properties provides by
nrfx API for get flash properties, which resolves problem
described above.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce nrfx_nvmc driver into nordic flash driver implementation.
Thanks to that nrf9160 SoC becomes supported by the driver.
nrfx helps dealing with differences with interface to the NVMC
in secure and non-secure execution modes.
This patch adds NRFX_NVMC Kconfig entry for enabling nrfx_nvmc and
select it along with nordic flash driver.
Disabled UICR operation on nRF9160 for non-secure build
as UICR is not available in this mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add driver support for Atmel SAM0 device ID, which is 16-bytes long.
The device ID can simply be read from memory at a known location, but
the location is only described in the data sheet, not in ASF.
For SAMD2x it's 0x0080A00C, 0x0080A040, 0x0080A044 & 0x0080A048.
For SAMD5x it's 0x008061FC, 0x00806010, 0x00806014 & 0x00806018.
This adds a new property to the device tree to define the device ID
registers for this SoC family.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The code (net_buf_simple_init in particular) expects the data buffer
to immediately follow the net_buf_simple struct, so it's wrong to
request any specific alignment for this buffer. In practice this
doesn't make any difference since the net_buf_simple struct itself is
4-bytes aligned and a multiple of 4 bytes, however the extra
__net_buf_align makes it look like its location in memory doesn't need
to immediately follow the net_buf_simple struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The dependencies in the scripts are figures, images, includes or literal
includes. Typically those dependencies are placed relative to the .rst
file that is being copied, but in some instances you might want them to
refer to an absolute path which, in fact, is relative to Sphinx's
top-level source directory. In this case, and as long as the top-level
source directory is provided, do not emit a warning.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In windows an additional / is added when using zephyr-env.cmd
this causes a build error in some scenarios. It also creates
ugly file paths.
Signed-off-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update read and write callback documentation regarding local access of
the attribute contents.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces set command to GATT which can be used to write local
attributes:
uart:~$ gatt set 0x000b 62 6c 61 68
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 62 6C 61 68
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces get command to GATT which can be used to read the
local attributes:
uart:~$ gatt get 0x000b
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 74 65 73 74 20 73 68 65 6C 6C
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables locating specific attribute in the database:
uart:~$ gatt show-db 0x2a00
attr 0x004235a8 handle 0x000b uuid 2a00 perm 0x09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces shell_hexdump API which can be used to print an array
such as a network buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force soc.h to include the headers generated automatically
by DTS. In addition, force arm_mpu_regions.c to include
misc/slist.h for ARRAY_SIZE() macro. arm_mpu_regions.c
does not need to include soc.h (it is included indirectly
via arm_mpu.h)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We don't actually need spinlocks here.
For user_copy(), we are checking that the pointer/size passed in
from user mode represents an area that the thread can read or
write to. Then we do a memcpy into the kernel-side buffer,
which is used from then on. It's OK if another thread scribbles
on the buffer contents during the copy, as we have not yet
begun any examination of its contents yet.
For the z_user_string*_copy() functions, it's also possible
that another thread could scribble on the string contents,
but we do no analysis of the string other than to establish
a length. We just need to ensure that when these functions
exit, the copied string is NULL terminated.
For SMP, the spinlocks are removed as they will not prevent a
thread running on another CPU from changing the buffer/string
contents, we just need to safely deal with that possibility.
For UP, the locks do prevent another thread from stepping
in, but it's better to just safely deal with it rather than
affect the interrupt latency of the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add board support files for mimxrt1015_evk, the development board for
i.mxrt1015 (CM7) SoC.
- Add pinmux, dts, and doc.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, basic/button.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Add mcux 2.5.0 drivers and device header files for mimxrt1015. Update
several drivers that were already imported for other SoCs but also apply
to mimxrt1015.
Origins: NXP MCUxpresso SDK 2.5.0
URL: mcuxpresso.nxp.com
Maintained-by: External
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
