uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Delete IPSP sample file, this source file is not included in any build
files. The service contains no valuable logic other than advertising
with the IPSP service in the advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the HID over GATT service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the Current Time service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the health thermometer service into the sample folder that
demonstrates it. This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
For using alpha numeric property values in a devicetree node, we
need to match the values starts with a number. Current scenario will
return the value as a numeric literal if it starts with a number. This
will not work for a compatible like, "96b-ls-con" which is proposed in
issue #15598.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use an assert to catch the situation where we can't find a port
to use for the reset line pin, since it shouldn't really happen.
The case where reset_pin_configure() is executed but no reset
line is selected can't happen due to static asserts in `integrity.c`
that enforce a reset line to be selected when the reset pin
functionality is enabled.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
This fixes the following error:
passing argument 5 of ‘fsutil_read_file’ from incompatible pointer type
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch updates the GAP ICS to 7.4.1.
It updates the Bluetooth Spec to 5.1 and added missing ICS tables.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This commit contributes the basic testing for
k_float_disable() API, for ARM and x86 ARCHes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make fp_sharing a 'parent' test suite directory, and
rename the original fp_sharing test into
tests/kernel/fp_sharing/generic. In this
way more FP-related tests can be grouped
together in the same test directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For the x86 architecture the z_arch_float_disable() is only
implemented when building with CONFIG_LAZY_FP_SHARING, so we
make z_arch_float_disable() return -ENOSYS when we build with
FLOAT and FP_SHARING but on an x86 platform where
LAZY_FP_SHARING is not supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The implementation of z_impl_float_disable was missplaced
inside the #ifdef SPIN_VALIDATE. Fixing it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implementation of pinmux of usdhc depends on board design.
Usdhc driver could change pinmux according to SD mode, SoC
should provide API for this. Board pinmux should register
its pinmux function to SoC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
1) dts/bindings/mmc/mmc.yaml: specifies common mmc.
2) dts/bindings/mmc/nxp,imx-usdhc.yaml: specifies
nxp usdhc module which inherits mmc.
3) dts/arm/nxp/nxp_rt.dtsi: usdhc support on RT chip.
4) boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts:
usdhc slot support on mimxrt1050_evk board.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
The name disk_access_sdhc.c is ambiguous,
actually this driver depends on SPI,
rename this file.
In addition, move the generic sdhc stuff from C file
to head file for other sdhc drivers to use.
1) disk_access_sdhc.c->disk_access_spi_sdhc.c.
2) create .h and move sdhc specifications from .c to .h.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Handle optional argument UUID in bt_gatt_discover with type
DISCOVER_DESCRIPTOR, bt_uuid_cmp doesn't check for NULL pointer.
On system with MMU (nrf52_bsim) this can result in segfault.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sanitycheck --help mentions that west-flash requires device-testing
to be enabled (and indeed it does because DeviceHandler will never
be called where west_flash option is used. Let's generate an error
if west-flash is used w/o specifying device-testing.
Also cleanup help text which looks odd in both sanitycheck --help
and in the file itself.
Signed-off-by: Michael Scott <mike@foundries.io>
Several boards have multiple runners setup. We need a way to specify
which runner to use with sanitycheck. Introduce --west-runner option.
Signed-off-by: Michael Scott <mike@foundries.io>
Added flags for controling detection of setting alarm to late.
Updated drivers to return -ENOTSUP when new option is requested.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARP, LLDP and GPTP functions have dummies in case of being disabled so
let's use IS_ENABLED() accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix assert in controller checking ticker_id_prepare = 0 when
a scanner and connection are active, and the connection is
skipping events in order to resize Rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the reset of ticker_id_prepare variable to the early
return in event_connection_prepare function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we receive IPv6 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We don't have any uses of this form of define so deprecate it for now.
If needed this should be DT_INST_<INSTANCE ID>_<COMPAT>_BUS_<BUS>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted LED and SW to use DT_ prefix we can mark the
non-DT_ prefixed versions as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted all _GPIO_ to _GPIOS_ we can mark the _GPIO_
form as deprecated (same for _PWM_ / _PWMS_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
