This adds commands to manage Friend node Subscription List.
Those will be used to add or remove and group/virtual address
from subscription list.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command will be used to test if model can properly send
segmented and unsegmented messages to a given destination address.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds stubs for Core Unregister Service command implementation.
It will be used to clean up the stack and tester after test case
execution.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This chack shall be performed on attribute uuid type, not uuid provided
in Gatt Get Attributes command paramteres.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Those commands will be used for qualification purposes to verify
the functionality of Mesh Health Model.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This event is needed for qualification purposes to verify functionality
of Mesh Network layer.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This introduced two BTP events to indicate provisioning link state.
This is needed for testing purposes, since PTS requests tester to
confirm link state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will be used for verification in GATT test cases.
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Remove references to make-centric build process, and refer to the
steps in a more neutral way (which is equally applicable to using
either make or ninja as the generator type).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Attribute Value Changed Event will be used to indicate characteristic
or descriptor value change in local GATT Server database.
Event will be triggered when PTS performed ATT Write operation
successfully.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
GATT Server:
According to the API, include service declaration user data
points to the first service attribute to include.
bt_gatt_include structure is valid only for client role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
/tmp/bt-stack-tester is not a pipe, but unix domain socket.
This commit fixes respective "make run" errors:
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: Could
not open '/tmp/bt-stack-tester': No such device or address
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: could
not connect serial device to character backend
'pipe:/tmp/bt-stack-tester
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We use UART1 for UART pipe in a number of qemu tests, so lets do the
same thing for the bluetooth test and move the bluetooth uart to UART2.
Jira: ZEP-2412.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The documentation of k_fifo_put mentions that the items must have 32
bits reserved for kernel use as that is where the sys_snode_t pointer
is placed but this detail was not taken into consideration when
designing the cmd_queue which access each element as a btp_cmd.
Note: This probably used to work just because k_fifo_get used to place
data directly into thread's swap_data so the kernel never really touched
the list but with the changes to use k_poll the list is always updated
exposing this issue.
Jira: ZEP-2568
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some README files referenced wiki articles that have been
moved to the doc area on the website.
Fixes#668
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new GATT service registration API is bt_gatt_service_register(),
which takes a bt_gatt_service object pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes an issue introduced by bab3aafa2d,
which changed the default value of UART_PIPE_ON_DEV_NAME to the same
used by BLUETOOTH_UART_ON_DEV_NAME. Due to this, the BTP and HCI were using
the same UART.
Change-Id: Ib59819e49610f28f4c89c0304d024bb1b6aa506a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes data passed to the BTP Device Found event.
Change-Id: I1ab465b87ce24f3ea10b7217c254aafaee494c91
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds support for handling L2CAP send data command.
Change-Id: I120a9ed56506ce205e32c5efe15c5d967d7726b6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP listen command.
Change-Id: I2c9c27f925c923a14ddb28b41fbefd612b32d63a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP disconnect command.
Change-Id: If6f8f3a7485dc8ae270481ed6af4f0a4d4c69fac
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP connect command.
Change-Id: I95d27831f65ed6a3e02e1d6e7583baa6890b588c
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds method which initialize data pool for L2CAP data.
Change-Id: I2b170489aa4b2afc3c1f962591f377e23d147161
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds commands to the Bluetooth Testing Protocol for L2CAP.
Change-Id: Ie9ea180c4db62c238ce1450e5714ffd7b0ca2f5f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no need for any prepare write variables as this is now handled
transparently by the stack and so any errors that happens during write
shall be reported in the return.
Change-Id: I3e629016cb7f5f6cd9106ff07c3cbb464e81734f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes invalid cast from struct bt_gatt_attr to bt_gatt_chrc.
Change-Id: Idc2c016e26b5d38d2d4772a7bd79af8357a4da58
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Returned by flush_value function value should be length of data which
are previously prepared by prepare write requests.
Change-Id: Iacfc63527c68cf20a76a4587acc749bd2d00cffd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch fixes returning invalid offset, invalid attribute length
error. Error should be set during prepare write and returned in
response to execute write request as error response.
Change-Id: I78c57abc5f6f2fbd4a2c0fbb1ee6532212679a36
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some IUTs may have predefined attributes in db which aren't take into
consideration while building via tester database. BTP clients should
know about such attribute handle offset change. After start server
we're sure that none of attributes will be added since zephyr db is
constant.
Change-Id: Ia2c6edaa7a2f3ca4a9c88fe00122c808a529dadb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for get supported commands of l2cap service.
Change-Id: Ic3e2b6502c05a5784d1fd01af0e47cce11e6d2c9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds initial declaration of l2cap service in tester
application.
Change-Id: I9bd729bc351b2fe135e7b5b80262b45eaf70b10b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch makes adding attributes more clean.
Attribute UUID and user data are now added along with the attribute
in gatt_db_add function. Thanks to that, some static variables have
been deleted, and the code is more readable.
Change-Id: I510bd7a1a9ae0210dd90520212a340ee1a3b2b53
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GAP_CONNECT bit was missing in supported commands.
Change-Id: I9d009c55327ae67bed38c45b7c11fb67665e1cd0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes opcodes to be in the sequence.
Supported commmands is form now uint8_t array, so this resolves
the problem with endianess as well.
Change-Id: I602a58081948dbbf5e0d83cbb12a118a5990b9f8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
CCC user data is already available on the initialization
(struct bt_gatt_ccc_cfg and ccc_cfg_changed callback).
Change-Id: Id06c69b6da33f651bc049983179cd6fe3bc197d6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes a bit of redundant code.
gatt_buf_reserve can call gatt_buf_add with data set to NULL, to
reserve space on gatt_buf.
Change-Id: I533a515bbd022a07ba8e2bfb3cd07e1a9ff8878b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Defined BT_UUID for the header can be used instead of struct member.
Change-Id: I55ca069d04622450e4fbb1e3f7abf6fdef2f8f30
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no point having separate handlers for signed writes and
write without response commands because both call the same,
bt_gatt_write_without_response function.
Change-Id: Ib033ffb77e2123dd565e8f1119ef668253f810f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This splits Authorization permission to Read with Authorization
and Write with Authorization.
Some attribites may be readable with no authorizarion, but writable
with authorization defined by a higher layer specification or be
implementation specific (eg. Server Characteristic Configuration
Descriptor).
Change-Id: I341a7095c1e8db1dea92cdeebf76c5a2307a49a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
